Body Kits

[kicker1_solo]

I'm bored so I'm making a thread about body kits. You're a noob and want to put a kit on your 3g? Well there are 3 made that bolt right on, they are made by
Erebuni (http://www.erebuni.net/ge/haccord86.htm)
http://www.hostilejava.com/Personal/aboutpersonal/Album/Car/cargwen.jpg
Kaminari (http://www.kaminari.com/)
http://www.kaminari.com/images_product/86Accord1.jpghttp://www.kaminari.com/images_product/86Accord2.jpg
Xenon (http://www.teamxenon.com/)
http://3geez.com/forum/attachment.php?postid=197581
http://www.streetsourcemag.com/uploads/Ownerprofiles/tk89acc/312003101859AM95581.jpg
Those are the straight bolt on kits for the 3geez, usually fairly spendy too. Of course they are kinda outdated in looks wise I think, so there have been a few of use to try our own thing. From the past experiences it looks like the best way to go with things is the 90-93 Accord rear end, 90-93 Accord sides (have to cut about 4 inches off), and the 90-93 Integra front. This mostly goes for the sedans and coupes, the hatch rear bumpers are shorter so they're harder to find something to make fit.

[kicker1_solo]

Here's a few pics of some member's cars who have been working on kits
ICEMAN707's car (teg front, accord sides and rear)
http://images.cardomain.com/member_images/7/web/379000-379999/379946_45.jpg
http://images.cardomain.com/member_images/7/web/379000-379999/379946_46.jpg
http://images.cardomain.com/member_images/7/web/379000-379999/379946_49.jpg
http://images.cardomain.com/member_images/7/web/379000-379999/379946_56.jpg
http://images.cardomain.com/member_images/7/web/379000-379999/379946_54.jpg

[kicker1_solo]

HostileJava's car (90-93 teg front)
http://www.hostilejava.com/Personal/aboutpersonal/Album/Car/IMG_2597.jpg
http://www.hostilejava.com/Personal/aboutpersonal/Album/Car/IMG_2599.jpg
military mase's car (all 90-93 accord kit)
http://www.89accord.com/special/blueaccord5.jpg
http://www.89accord.com/special/blueaccord6.jpg
Accordlx143km's car (90-93 accord kit)
http://images.cardomain.com/member_images/1/web/397000-397999/397709_6_full.jpg
http://images.cardomain.com/member_images/1/web/397000-397999/397709_9_full.jpg
http://images.cardomain.com/member_images/1/web/397000-397999/397709_4_full.jpg

[blazin3gen]

yes this should get a sticky!!!!

[kicker1_solo]

zwaag's car (90-93 accord kit)
http://images.cardomain.com/member_images/12/web/324000-324999/324842_1_full.jpg
http://images.cardomain.com/member_images/12/web/324000-324999/324842_3_full.jpg
kicker1_solo's car (90-93 integra front)
http://www.imagestation.com/picture/sraid81/p7c85cce9f962f2878f08aa14f6f91540/fafb6ccb.jpg
http://www.imagestation.com/picture/sraid81/pe2352391173755e2eeb55acdc380405b/fafa9a52.jpg
http://www.imagestation.com/picture/sraid81/p01d2d998a9d2b6dde0ae91555cbda83e/fafa9a4a.jpg
http://www.imagestation.com/picture/sraid81/p8c154e23a627d627706381e8848005dd/faf419b6.jpg
http://www.imagestation.com/picture/sraid90/p930de0515334f0a0ea9aed9a8f5f24f0/fa72e970.jpg
The main problem with the 90-93 integra and accord bumpers is mounting them. ICEMAN707 did the smart thing and used the top of the 86-89 accord bumper and molded it to the new one so that everything ligns up perfectly and he can bolt it on. For the integra front, there's a lip that sticks up that you will have to cut off and you will have to cut out a little bit for the headlights to work. You can see it in this pic, the white is where I cut
http://www.imagestation.com/picture/sraid81/pc70921ddf21f3ed66e73756baf0e472c/faf419df.jpg
I can't say if you will need to do any cutting on the 90-93 accord bumper because I haven't used that one, but the integra one must be cut to fit.
And last but not least is another accord with a 90-93 accord full kit.
http://monolith.projectgamma.com/~kroy/3geez/Bluie/

Imagestation is down right now so you'll have to wait to see my pics.
I guess that's all for now, just thought I'd make a quick little FAQ for the noobs.

[kicker1_solo]

bump for the noobs

[thegreatdane]

Actually there's 5 bodykits... You forgot two..

[Dennis]

So the 90-93 Accord has the same front bumper/read bumper and sides as an 88 accord lx? is it a direct bolt on or does it require cutting like the 90-93 tegS?

[kicker1_solo]

Originally posted by Dennis
So the 90-93 Accord has the same front bumper/read bumper and sides as an 88 accord lx? is it a direct bolt on or does it require cutting like the 90-93 tegS? read, I said it in the above post. And it doesn't bolt right on, you will need to find a way to bolt it on.

[NXRacer]

Dont forget mine! 98 civic Wings West Avenger kit....
http://images.cardomain.com/member_images/12/web/372000-372999/372215_9_full.jpg

in the above picture, the kit was only sitting on the car and was not changed whatsoever to fit. Only small modifications are needed to make it work. Under the headlights needs to be trimmed out so they can flip up/down. Some small fiberglass work could be done to help the side markers flow better with the body kit. Other then that, just a civic grill could be put in to help fill the grill gap.

[kicker1_solo]

Originally posted by NXRacer
Dont forget mine! 98 civic Wings West Avenger kit....
I'll consider that one a work in progress :D

[AvsFan212333]

"Actually there's 5 bodykits...You forgot two..." -thegreatdane

What are the other 2 brands?

[mykwikcoupe]

which rear bumper is on icemans and military mases car? Sorry if its been posted a thousand times already.

[BITESIZE]

Damn, this is a great thread that should be made and put in the F.A.Q. and How to's! Way to go!

[A Dawg Jr]

Here are some more of the erobuni kit on my car......

http://images.cardomain.com/member_images/11/web/383000-383999/383829_2_full.jpg

http://www.angelfire.com/comics/kyokin/re_back.jpg

I can get more later...

[thegreatdane]

Originally posted by AvsFan212333
"Actually there's 5 bodykits...You forgot two..." -thegreatdane

What are the other 2 brands?

Style Auto and Schneider. A guy on the board has an aerodeck with the style-auto kit..

[RobT5580]

Yeah there is the Eurebuni kits too bad they were fiberglass because i kinda liked one of them. But the xenon kit is what im gonna use when the time comes and i like how clean it looks.

[shane_lxi]

This has DEFINATELY been asked of you a million times kicker, but I am, as you know, a complete n00b, how did you fsten your 90-93 teg bumper? It seems to me taht you would have to make custom brackets or someting, please write back or something, or falme me if you will, but bear in mind that I am VERY new to the 3g accord scene! :)

[HostileJava]

I used a 90-93 teg bumper, took the cover off, put the aftermarket cover on and made some mods so make it bolt up to the accord. It was fairly easy.

[kicker1_solo]

Originally posted by HostileJava
I used a 90-93 teg bumper, took the cover off, put the aftermarket cover on and made some mods so make it bolt up to the accord. It was fairly easy. that's the correct way to do it
my way = 3 zip ties, one in the upper middle and one in each wheel well :)

[woode]

hey a dawg jr, how much is that kit thats on yours? and does it all fit right on the car? and do they come in the colors of our cars or do you gotta paint em?

[blazin3gen]

A dawg was selling his kit awhile back dont know if he sold it or not contact him about it bro

[kicker1_solo]

Originally posted by woode
hey a dawg jr, how much is that kit thats on yours? and does it all fit right on the car? and do they come in the colors of our cars or do you gotta paint em? not sure about the price, fits right on the car, and you have to paint it.

[shane_lxi]

So, hostile, you took the foam in the bumper, put it in the new bumper, and made minor midifications to the bolt on places to make it bolt on, did this take any longer then a day?

[mykwikcoupe]

a dawg jr kit has been trashed. I teied to get it from him for like 6 months. He finally posted back and sid his dad tossed it out.

[88LXiHatchMOdifier]

don't forget me, haven't been on here in a while. representin the east coast,and the pa/delaware area. keep a look out, I'm getting my motor soon(soon to be DOHC:). My car is sitting in primer,and will be getting custom bodywork soon . I'll post pics when I start getting busy...

Peace

[HostileJava]

Originally posted by shane_lxi
So, hostile, you took the foam in the bumper, put it in the new bumper, and made minor midifications to the bolt on places to make it bolt on, did this take any longer then a day?

No more then a days work to make it fit ok. If you want it to line up perfect though your going to have to do some cutting and fiberglassing to the bumper. But it looks pretty damn good just using the teg mounting hardware and slightly modifying it.

[Johnny b.]

kiker 1 solo how much should i expect to pay for a bumper like you or hostile java used??

[kicker1_solo]

Originally posted by Johnny b.
kiker 1 solo how much should i expect to pay for a bumper like you or hostile java used?? I did the smart thing and found a used one that was local. If you do that you can pick one up for $100, maybe $200 tops depending on the quality of it.

[shane_lxi]

I decided on the street fighter kit, I am going to use a 90-93 teg air dam, and 90-93 accord side skirts and rear bumper. The front bumper has been easy to find so far, but the rest is going to be tuff. :P

[HostileJava]

Originally posted by Johnny b.
kiker 1 solo how much should i expect to pay for a bumper like you or hostile java used??

I think I paid 225 for my from a local speedshop.

[ICEMAN707]

my 4 cents:

1) try IMPORTFAN.com. their kits are high quality GTP blue class and their price is the best i've seen on the net. if you want something cheap to cut and mess around with, there's always ebay, lycos, and yahoo auctions. remember these kits are cheap and so is the quality. so expect to get what you pay for. but you can always add more layers of fiberglass yourself if you are good with fiberglassing.

2) don't get urethane kits. although they may be more durable like the factory bumpers due to their flexibility, they are not easy to mold once cut. any fiberglassing/bondoing done to urethane kits will be prone to cracking/separating due to the flexible nature of urethane.

3) use 4g accord sedan sides and rear and 90-93 teg front. the 4g accord sideskirts are too long and have to be cut about 4 inches and the door jams of the 3g are not the same as the 4g so be prepared to run into fitment issues around that area. all i can say is cut and refiberglass. also, remember to choose the kit wisely. not all kits flow with the boxy style of the 3gee, and there will be fitment issues that come up if you choose a kit that's too rounded or smaller/tight on the edges. buy a rotary cutting tool, power drill with lots of sized drill bits, and a really good orbital sander. buy lots of bondo products, tons of different grit sandpaper, epoxy glue, fiberglass matting, fiberglass resin, screws/bolts, spray primer, and metal for custom brackets. be prepared to be your own little body shop while undergoing this type of project.

4) and last and most important of all, if you do not have experience or not willing to invest the time (to learn and experiment) and money (of course) to fiberglass/mold bodykits, don't do it. remember to spend wisely. the tools are only as good as the user. make sure you know what you are doing before you splurge $500+ on a kit that sooner or later you would just give up on. we can tell you as much as we can how we did it, but it's up to you to figure out yourself. visit custom bodyshops, talk to people at car shows, read car bodywork books, etc. remember 3 things in life: "knowledge is power", "if you want something done right, do it yourself", "don't take someone else's words for granted but your own".



peace out peeps and stay cool!! :super:

[ICEMAN707]

oh yeah, custom FEELS-type widebody fender flares and custom EVO3 hood vents are the next bodywork i'm tackling soon. my little 1:14 scale Skyline R34 GTR-LM model car inspired me...hehe :D
:super:

[hondamanlxi]

im in the game now!http://images.cardomain.com/member_images/1/web/373000-373999/373687_38_full.jpg
http://images.cardomain.com/member_images/1/web/373000-373999/373687_39_full.jpg

[blazin3gen]

o hell ya man that looks good!!!!

[hondamanlxi]

just gotta mount it using hostiles great idea and its done!

[Johnny b.]

kiker 1 solo and hostile java thanx for the info sorry took so long to respond but i broke my wrist monday and havent felt like writing but thanx im going to try to find a cover right after xmas and i might go ahead and get a 90somthing prelude a buddy of mines got for 1500.00 later ..jb

[Johnny b.]

kiker 1 solo and hostile java thanx for the info sorry took so long to respond but i broke my wrist monday and havent felt like writing but thanx im going to try to find a cover right after xmas and i might go ahead and get a 90somthing prelude a buddy of mines got for 1500.00 later ..jb

[shane_lxi]

you don't have to double click the 'post reply' button. LOL

[89 Accords Rock]

i def like the blue 90-93 accord kit! looks tight!

[HostileJava]

How is this not a sticky yet?

[i.c.]

seriously....i don't know if i'd kit the dx but if i ever got another 3g lxi coupe then i'd proibly put the 97+ prelude front end and kit made for it...

[lightbulblxi]

i kinda like the kaminairi kit that is pictured. but my car is a 88 and that one is for the 86/87. will it work?

[Coroncho80]

How could you guys leave Ninja's out of the picture?


Xenon:


http://mysite.verizon.net/vze1zp2e/units/ninja/P5140006.jpg

http://mysite.verizon.net/vze1zp2e/units/ninja/P5140007.jpg

http://mysite.verizon.net/vze1zp2e/units/ninja/P5140008.jpg

http://mysite.verizon.net/vze1zp2e/units/ninja/P5140010.jpg

http://members.cox.net/jcrump/Image002.jpg

http://members.cox.net/jcrump/Pics/Image099.jpg

http://members.cox.net/jcrump/Image001.jpg

http://members.cox.net/jcrump/Pics/Image100.jpg

[Coroncho80]

Or OldSchoolSwap's ---- This should defenitely get a "Sticky" ;)

http://www.hpphoto.com/servlet/LinkPhoto?GUID=3d2b9ca6-39eb-2a76-a5e3-32de46632941

http://www.hpphoto.com/servlet/LinkPhoto?GUID=37bd3e58-2451-2616-3720-7cbf27075de0

http://www.hpphoto.com/servlet/LinkPhoto?GUID=6e6f1400-2461-3b44-410e-16d63d982819

http://www.hpphoto.com/servlet/LinkPhoto?GUID=46bf2f68-5ba3-4d5a-22cd-4dac4b36555d

http://www.hpphoto.com/servlet/LinkPhoto?GUID=172026d1-6623-5869-6e14-166238564a6e

http://www.hpphoto.com/servlet/LinkPhoto?GUID=74d022ac-141e-2d29-604a-20fc41c94c62

http://www.hpphoto.com/servlet/LinkPhoto?GUID=54b277da-36b2-2d15-1872-4c11377adbc1

http://www.hpphoto.com/servlet/LinkPhoto?GUID=116d2514-53f7-1dd7-4c3d-260610be477f

http://www.hpphoto.com/servlet/LinkPhoto?GUID=5bdc15bd-5b0a-5d7d-2ed8-5bfd31881ec7

http://www.hpphoto.com/servlet/LinkPhoto?GUID=b6e065a5-1f8e-7e5d-6959-197760bf7328

[Hash_man_Se_i]

Wow, I dont know how I missed this thread. Old schools car is just incredible, and so is Ninjas... I havent seen some of those pics for a very long time.

And we can't forget this beautiful beast! :drool:
http://www.imagestation.com/picture/sraid95/p403afbf330c2988bb1e652a8b2182b82/fa211889.jpg

I dont know what kit, or from what car this kit is, but the car just looks amazing.

[AccordArizona89]

3dit

[BITESIZE]

Good job on finding Paul's photoshopped body kit. :)

[sccrsteve5]

How about this 90-91 Xenon 4 door kit on my 88 LX? hard to fit? easy to fit? any input? http://www.teamxenon.com/cat2002pdf/ca02.pg26.pdf

[kicker1_solo]

I don't like the way that the 90-93 accord fronts fit.....

[sccrsteve5]

do the rear and sides fit well then?

[kicker1_solo]

do the rear and sides fit well then?
the sides need to be cut down, the rear fits better than the front.

[sccrsteve5]

ok, gracias

[3rdgeneration]

Is there any side skirts and rear bumber body kits that will bolt on with little or no modification besides the kits made for our cars

[kicker1_solo]

no, that's the whole thing.
Made for your car = direct bolt on
not made for your car = modification

[AccordArizona89]

his photoshop shure fooled me... lol

[hondaman87]

these are some nice kits

[3rdgeneration]

no kidding i would have to make modifications but i was wondering what kits would be closer fitting then others?

[kicker1_solo]

no kidding i would have to make modifications but i was wondering what kits would be closer fitting then others?
so far we've found that the 90-93 accord sides and rear are the best fit, and the 90-93 integra front is the best fit.

[DarknessRS]

I made a list like this once a while ago, but the mods never made it a sticky.

http://www.3geez.com/showthread.php?t=14084

[Jaehan89LXi]

I have an 89' Accord LXi and im looking for a body kit that will fit it, I like the low ground clearance big fog light wide mesh front look (kinda like.... ermmm... WRX front bumper look) and I cant find anything that will fit it, and Ive never done any fiberglass work so im not sure if I could get it to fit myself, so basically im asking,
What can I get that will fit my design needs,
And how much work will be needed, im a pretty quick learner but not experience with fiberglass... thanks

[StUpiD8000]

http://www.geocities.com/poisonfaygo/3GEEZBODY.txt
Not to sure about it
It has some BMW rear....Z24 sides...And a stock front bumper cut in two and put on upsidedown as a lip...

[hondaman87]

http://images.cardomain.com/member_images/6/web/462000-462999/462427_35_full.jpg

same car ass the one above

[zerotap]

Hey on the maroon accord are those stock bumpers painted over or bumpers from another car ? I am wondering if I should do a body kit for my 88 accord 3rd gen or just keep it stock and give it a fresh coat of glossy paint and tint the windows. I think as old as the car is it looks fine for body lines and up to date kits with modern looks are impossible to find without considerable expense in customising from other kits.
I'm bored so I'm making a thread about body kits. You're a noob and want to put a kit on your 3g? Well there are 3 made that bolt right on, they are made by
Erebuni (http://www.erebuni.net/ge/haccord86.htm)
http://www.hostilejava.com/Personal/aboutpersonal/Album/Car/cargwen.jpg
Kaminari (http://www.kaminari.com/)
http://www.kaminari.com/images_product/86Accord1.jpghttp://www.kaminari.com/images_product/86Accord2.jpg
Xenon (http://www.teamxenon.com/)
http://3geez.com/attachment.php?postid=197581
http://www.streetsourcemag.com/uploads/Ownerprofiles/tk89acc/312003101859AM95581.jpg
Those are the straight bolt on kits for the 3geez, usually fairly spendy too. Of course they are kinda outdated in looks wise I think, so there have been a few of use to try our own thing. From the past experiences it looks like the best way to go with things is the 90-93 Accord rear end, 90-93 Accord sides (have to cut about 4 inches off), and the 90-93 Integra front. This mostly goes for the sedans and coupes, the hatch rear bumpers are shorter so they're harder to find something to make fit.

[skull1441]

can anyone tell what kind of kit on this car ? ( just front )

http://images.cardomain.com/member_images/9/web/513000-513999/513547_1_full.jpg

[StUpiD8000]

can anyone tell what kind of kit on this car ? ( just front )

http://images.cardomain.com/member_images/9/web/513000-513999/513547_1_full.jpg

http://images.cardomain.com/member_images/9/web/513000-513999/513547_1_full.jpg
Something way to big...WOW...Yet somehow, it still trys to follow the lines of a 3rd gen...Just need to see it with sides on maybe

[JakeEXLS]

Wow, I dont know how I missed this thread. Old schools car is just incredible, and so is Ninjas... I havent seen some of those pics for a very long time.

And we can't forget this beautiful beast! :drool:
http://www.imagestation.com/picture/sraid95/p403afbf330c2988bb1e652a8b2182b82/fa211889.jpg

I dont know what kit, or from what car this kit is, but the car just looks amazing.

Dood, Do you know where that car is from? Its looks fuckin sweet :cool2: , and i swear that the license plate on that it exactly the same as we have over here in NZ, and all cars have the white sticker down in the bottom (if looking from front)right hand corner of the front windscreen... But i cant see if that thing is a RHD... Clues anybody?

[A20A1]

Sorta looks like it was grafted onto the stock bumper... there are odd little lines at the corners.
.
.
It looks like a lude kit... the newer ludes... 98... but thats too straight
so it could be from a teg or the 4th gen accord

I found something close... I'll continue to look though.
97-01 Honda Prelude Wings West Aggressor II Front Bumper
http://search.netscape.com/ns/boomframe.jsp?query=1990+accord+bodykits&page=1&offset=0&result_url=redir%3Fsrc%3Dwebsearch%26amp%3Brequest Id%3Df542cb0ddeb119ae%26amp%3BclickedItemRank%3D3% 26amp%3BuserQuery%3D1990%2Baccord%2Bbodykits%26amp %3BclickedItemURN%3Dhttp%253A%252F%252Fwww.aspecmo torsports.com%252F90to93hondaaccord.htm%26amp%3Bin vocationType%3D-%26amp%3BfromPage%3DNSCPResults&remove_url=http%3A%2F%2Fwww.aspecmotorsports.com%2 F90to93hondaaccord.htm
http://search.netscape.com/ns/boomframe.jsp?query=1990+accord+bodykits&page=1&offset=0&result_url=redir%3Fsrc%3Dwebsearch%26amp%3Brequest Id%3Df542cb0ddeb119ae%26amp%3BclickedItemRank%3D3% 26amp%3BuserQuery%3D1990%2Baccord%2Bbodykits%26amp %3BclickedItemURN%3Dhttp%253A%252F%252Fwww.aspecmo torsports.com%252F90to93hondaaccord.htm%26amp%3Bin vocationType%3D-%26amp%3BfromPage%3DNSCPResults&remove_url=http%3A%2F%2Fwww.aspecmotorsports.com%2 F90to93hondaaccord.htm

[JakeEXLS]

Sorta looks like it was grafted onto the stock bumper... there are odd little lines at the corners.
.
.
It looks like a lude kit... the newer ludes... 98... but thats too straight
so it could be from a teg or the 4th gen accord

I found something close... I'll continue to look though.
97-01 Honda Prelude Wings West Aggressor II Front Bumper
http://search.netscape.com/ns/boomframe.jsp?query=1990+accord+bodykits&page=1&offset=0&result_url=redir%3Fsrc%3Dwebsearch%26amp%3Brequest Id%3Df542cb0ddeb119ae%26amp%3BclickedItemRank%3D3% 26amp%3BuserQuery%3D1990%2Baccord%2Bbodykits%26amp %3BclickedItemURN%3Dhttp%253A%252F%252Fwww.aspecmo torsports.com%252F90to93hondaaccord.htm%26amp%3Bin vocationType%3D-%26amp%3BfromPage%3DNSCPResults&remove_url=http%3A%2F%2Fwww.aspecmotorsports.com%2 F90to93hondaaccord.htm
http://search.netscape.com/ns/boomframe.jsp?query=1990+accord+bodykits&page=1&offset=0&result_url=redir%3Fsrc%3Dwebsearch%26amp%3Brequest Id%3Df542cb0ddeb119ae%26amp%3BclickedItemRank%3D3% 26amp%3BuserQuery%3D1990%2Baccord%2Bbodykits%26amp %3BclickedItemURN%3Dhttp%253A%252F%252Fwww.aspecmo torsports.com%252F90to93hondaaccord.htm%26amp%3Bin vocationType%3D-%26amp%3BfromPage%3DNSCPResults&remove_url=http%3A%2F%2Fwww.aspecmotorsports.com%2 F90to93hondaaccord.htm

Was the second bit of that in Reply to me? Dont get me wrong, im not ungrateful for the links (infact i got some sweet pics from there to stick on my school folder :tongue:!) but i just wanted to know where that car is from, and.or who it belongs to!!!

http://www.imagestation.com/picture/sraid95/p403afbf330c2988bb1e652a8b2182b82/fa211889.jpg
Is this YOURS?

And Sorry for dragging up old thread :rolleyes:

[86hatch]

I used a 90-93 gsr and I made a whole bumper support and had to cut out for the lights to flip up. now it looks great like it came from the factory!!

[i.c.]

http://images.cardomain.com/member_images/9/web/513000-513999/513547_1_full.jpg
Something way to big...WOW...Yet somehow, it still trys to follow the lines of a 3rd gen...Just need to see it with sides on maybe


you know...if they trimmed that down a little it'd look good :werd:

[sandmbiker351]

so which body kit combination would look best on my car? keep in mind my car is lifted 6 inches higher than stock on 17's to rally, so which kit would look sick?

[HostileJava]

No offense, but i don't think any kit is gonna look to good on a jacked up accord.

[Bloodlust]

No offense, but i don't think any kit is gonna look to good on a jacked up accord.

:werd: to that. I think a jacked up accord in general would look kinda dumb. No offense tho.

[sporkHSP]

what would you guys think about a 2000ish impreza bumper... its the stock one, i know it would take lots of costom work, but i think it could look pretty cool on one or our cars... there are two of these down the street from my house so i see them everyday on my way to work...

http://www.nw-autopage.com/lg_pics/1770580.jpg

2000 imprezas are 67.1 inches wide, we are 66.7 inches wide... so the width should work alright i think...
and they have the slots for the bumper lights in them already, just probably some harness conversions and it would be set as far as the lights...

[sporkHSP]

rough photoshop work for the 2000 impreza bumper on my car... these were done in like 20 minutes...
http://images.cardomain.com/member_images/2/web/434000-434999/434603_34_full.jpg
http://images.cardomain.com/member_images/2/web/434000-434999/434603_35_full.jpg
*EDIT* more food for thought
http://images.cardomain.com/member_images/2/web/434000-434999/434603_36.jpg
http://images.cardomain.com/member_images/2/web/434000-434999/434603_37_full.jpg
http://images.cardomain.com/member_images/2/web/434000-434999/434603_38_full.jpg
...you can buy a subaru replacement bumper cover for these Imprezas for under $100, but i want to know how well it would fit before i do it.

[lovin88]

off the topic here, but can any one tell me what rims are those on Accordlx143km's car

[Not like a rock]

This is a bit obscure, but does anyone know if a 87-90 (2G ?) Acura Legend rear bumper is going to fit the same way a 4G accord one does?

[steve-024]

hey guys , some sweet rides, my fav was the orange one , man is that dope or what , whats under the hood ? anyways im thinking of soemthing for my 87 accord lx ? what kinda stuff will i have to look over to figure out what i can do ?

[sporkHSP]

it depends on what ur looking for... im going to assume you mean bodykits because that is the point of this thread... the options listed on the first couple pages are the best options for you... 3g accord kits 4g kits or 2nd gen teg kits are the best... just make sure you have a place for bumper lights [turn signals] in the kit

[HostileJava]

I just want to let everyone know that I just got off the phone with Erebuni and all of there major distributors. The Erebuni kit is no longer being made and none of there major distro's have any back stock of it. If you can find one that one of your local speedshops happens to still have in stock consider yourself lucky.

[steve-024]

i dont really liek the erebuni one myself , i do like the 90-93 accord and teg kit ! what about install very hard or what ?

[Free_3G]

About how long does it take to modify the teg kit to fit?

[mattdx88]

hey guys ive been thinking about this teg bumper thing if i get this air dam will i have to cut any or can you tell
http://www.import-showoff.com/product.asp?pID=568&cID=44

[DeathRat]

Here's pics of my "modified" Erebuni kit!
http://memimage.cardomain.net/member_images/11/web/491000-491999/491601_138_full.jpg
http://memimage.cardomain.net/member_images/11/web/491000-491999/491601_117_full.jpg

[silverslayer9000]

are there any body kits out there that would fit on a 1987 Honda Accord Lxi

[sporkHSP]

read the thread. direct fit for 86 and 87 is only alittle more difficult than 88-89, all the 3gee kits were made for the 88-89 bumpers, which means that you can just buy one of those bumpers and the kit will go on perfectly, and the bumpers are interchangeable, so dont ask.
this is a 5 page thread and you still couldnt figure out if there are body kits for your car?

By the way, Deathrat, that kit looks awesome. especially the front

[Headnoise]

I am getting a 87... I was just wondering exactly how hard it would be to put on a 90-93 kit on it. I saw the 90-93 kits on here, and I love the way they look. But I am completely new to car customizing and stuff... So would I be able to do it?.. My friend will help, he is pretty good with cars, but what all will I need to make the 90's kits fit onto a 87? Thanks

[HostileJava]

all the 3gee kits were made for the 88-89 bumpers, which means that you can just buy one of those bumpers and the kit will go on perfectly, and the bumpers are interchangeable, so dont ask.


That's not true, there were kits made for the 86-87 models and kits made for the 88-89 models.

[AccordArizona89]

u can fit any bodykit out there. u just gotta plan out how it will line up. it takes modification but u can do any bodykit to a whole front end conversion. any 90-93 teg and 90-92 accord will fit almost perfect.

[86LXItooFAST4me]

have yall seen the integra JDM convertions in tuner magazines?? comes with finders and all. i bet the 3G would be ILL with a JDM teg front.

[88accordhb]

you mean the 94 and up teg with the one piece headlights?

maybe. but uhh nah, pop up owns.

btw, hood wont fit, fender wont fit sooo bah!

[86 ACCORD DIPPIN]

hello all im new 2 the g3 sceene. and im sure this has been asked many times before me. but anyone know which kits on [military mase's car] its tight. i own an 86 accord lx 4dr .and anyone know whats mods id have 2 do 2 make it fit, and bout the price range, and where 2 get it? lol i know its asking alot....thx alot everyone...

[sporkHSP]

i believe its a black widow kit for a g2 teg.... but if memory serves me correctly its very similar to the kit that extremedementions.com is selling for out cars now, and its already molded for 3rd gens. check that kit and see if you like it.

[Priest]

I'm a noob when it comes to bodywork. Do you mount up the turn signals in the new front bumper? I was looking at the pics of the other cars and noticed none of them had the signals. Did you turn the side markers into signals or what?

[military mase]

iif your talking about the front blinkre lights mine are sitting behind the wire mesh so there not visible unless i am turning or have 4-ways on

[Bigg_Nate2008]

im thinkin about getting spyder body kit for my 86 honda accord! Does any one know where u can get hoods for the 86 honda accord or willl i just have to get a hood scoop.

[sporkHSP]

what are you looking for? There are OEM style carbon Fiber hoods out there, but as far as scoops and cowls, you will have to buy a universal or one for another car.

[NXRacer]

I was at a friends house last night and he had a pair of 92-95 civic sedan mugen side skirts. I fit them up on my hatch and they fit PERFECTLY. Just a little trimming needed on the front fenderwell mounting point. Other then that, the length couldnt be more perfect.

not sure if this is known already or not, but i thought i'd throw it out there. They did look pretty sick. It was dark so i couldnt really get any good pictures of them fitted up.

[sporkHSP]

damn, i wish i had my hatch still.

[NXRacer]

i wonder how much of a difference in the lengths the hatch is from the coupe and sedan. It was such a perfect fit on my hatch, if the coupe's are shorter then the hatch, i bet the civic coupe sideskirts would fit.

[88accordhb]

wooo, body kit time for CT. lol.

[NXRacer]

if you want a body kit, check it out. they'd look good. then you could do the integra bumper and it would look SAHWEEET

[sporkHSP]

apparently 92-95 civic 4dr. sideskirts fir hatches pretty well.
see below:
http://3geez.com/forum/showthread.php?t=43559

[Robs89LXi]

Before you new guys go out and spend money buying an Integra kit, thinking that it will just bolt right on, let me tell you, IT DOES NOT. Do not listen to these guys who tell you it does, as most of them have never tried it themselves. Some members have been able to get Integra front bumpers to fit, but IT IS NOT A DIRECT BOLT ON. It does take some modifications to get it right. I've been to a junkyard, pulled both bumpers and tried lining them up. Mounting points are different, which makes it not sit flush front to back, and leaves a gap above that would have to be compensated for. Read carefully the posts by the guys who have actually done it, and you will see they all say that modifications are required. Just a warning.

[Bigg_Nate2008]

do yall think the M3 style mirrors will fit a 1986 honda accord hatchback.

[sporkHSP]

what kind of M3 style mirrors? it would probably take some work, but you could possibly adapt a 4g accord kit to work. Im not telling you to do it, I have no idea if it will work, but if you want to do some custom work, you can probably get it to work.

[Bigg_Nate2008]

what kind of M3 style mirrors? it would probably take some work, but you could possibly adapt a 4g accord kit to work. Im not telling you to do it, I have no idea if it will work, but if you want to do some custom work, you can probably get it to work.


Well they look like they would fit i dont see Y they wouldnt fit. They have the same triangle layout where it hoks to the car and everything. I dont know what kind their at RacinX.com

[sporkHSP]

search the board for 4th gen mirrors, I know people have had discussions anout them before, I don't remember if they said they can work or not.

[Bigg_Nate2008]

they said they would they would just need to be rounded of fat one of the edges.

[Bigg_Nate2008]

Would a 88-91 honda prelude front bumber and rear bumber fit my car(1986 honda accord hatchback).

[Finaldestiny0521]

I recently found a nice body kit...

Kaminari Body Kity (http://spoilers4less.com/kabostcohoac.html)

it's only for 86/87 accords, however, so you late 3gen boys are out of luck...

[HostileJava]

Yeah I think that is listed in the FAQ. Is it still available to actually order? BTW, to get it to fit on an 88-89 you just need to swap the front bumpers. :D

[asktheidiot]

I know you said that you only found 3 makers of body kits, i have an 87 accord lx 4dr, and i was even able to find a body kit for it. Extreme Dimensions. nuff said. www.extremedimensions.com then just do a search they have a spyder kit for roughly $850 i think it's a replacement though instead of a bolt on

[HostileJava]

They just recently started making those. If you do a search you should find several posts from the company on the board. Also, I'm not to fond of the design myself.

[Robs89LXi]

I know you said that you only found 3 makers of body kits, i have an 87 accord lx 4dr, and i was even able to find a body kit for it. Extreme Dimensions. nuff said. www.extremedimensions.com then just do a search they have a spyder kit for roughly $850 i think it's a replacement though instead of a bolt on

Have you actually gotten a kit from them? The pictures they show on their website are of a couple of 3Geez members cars, not anything they did themselves. There have been several requests made to them directly, and here through the forum for pics of their work, but to date, none have been posted (so far as I know). If you did get one, please be sure to post pics when you get it on, and also let us know just how good a quality it is.
Thanks.

[88accordhb]

i don't even think that spyder kit is made for the 3g. plus it's super expensive.

[snoopyloopy]

i don't like how that kit looks on our cars. it doesn't really go with the lines of the front at all.

[daamizin1]

the spyder bodykit dont look too bad on the 3g's as long as you do other bodywork like shave the scratch guards n put z3 fenders on.

[Pro_Mod_Accord]

I recently found a nice body kit...

Kaminari Body Kity (http://spoilers4less.com/kabostcohoac.html)

it's only for 86/87 accords, however, so you late 3gen boys are out of luck...


This is not the def: of nice, and by the way this kit would also fit on 89-89 accords. PERIOD!!! :mod:

[Gemini2003]

I know you said that you only found 3 makers of body kits, i have an 87 accord lx 4dr, and i was even able to find a body kit for it. Extreme Dimensions. nuff said. www.extremedimensions.com then just do a search they have a spyder kit for roughly $850 i think it's a replacement though instead of a bolt on


Here is the actual link of The body kit Here (http://www.extremedimensions.com/shopdisplayproducts.asp?prodtype=Body%20Kits&id=333&cat=Accord%202DR/4DR%2086-89) Looks great however at over 11 Hundred Canadian it's pricey!!

I'm seriously thinking about learning fiberglass and seeing what I can come up with over the winter months...

[Pro_Mod_Accord]

Here is the actual link of The body kit Here (http://www.extremedimensions.com/shopdisplayproducts.asp?prodtype=Body%20Kits&id=333&cat=Accord%202DR/4DR%2086-89) Looks great however at over 11 Hundred Canadian it's pricey!!

I'm seriously thinking about learning fiberglass and seeing what I can come up with over the winter months...



Xcelent Idea!!!! Go for it, there is only one way to learn, trial and error.
Be fully aware fibrglass is very hard to work with when faced against the forces of gravity and is messy as hell. Plan to do a lot of sanding, sanding, filling, sanding, and more sanding, glazing, and more glazing and sanding. Not as easy as some people my think...lot of fabrication to make the product look flawless....Could be a disaster, it you don't got the skill, patience, and time to finish custom fibreglass work...PERIOD!

tRY NOT TO USE A LOT OF FILLER TO FILL IN LOW SPOTS AND MISTAKES,,,SPEND THE TIME AND LAYER THE CLOTH IN THESE BAD AREAS, CUT THE SHAPE NEED, BUT MAKE SURE YOU DO IT IN LAYERS,, WHEREAS THE FISRT LAYE IS SMALLER, THEN THE NEXT LAYER SLIGHTLY LARGER,,,AND SO ON,,,,TO BUILD IT UP...

I am curretly finishing my 88 LX custom body work,, should be ready for paint in the next 2 weeks...IceMan707 is gonna have a serious contender to deal with in here, his car motivated me to attempt something that has never been done by any 3 geez member....don't have a digi cam...but when I'm finished, I'm gonna get some didgi pics and post them in here....You guys are gonna be amazed!!

Body Mods:

Custom Fab rear Bumper (seamless)
- body kit rear from???(Fabed, cut, custom molded to fit took 40+hrs)*

Custom Fab trunk Seamless (fab seam with bumper20+hrs)

Trunk Shaved

Seamless Front Bumper
- 90-93 TEG Spyder 2
- Fab custom bumper into hood (40+hrs)
- Fab custom hood release opening

Side skirts
- Custom Hand bilt from scratch (60+ hrs)
- completley seamless (even under the car)
- flares up into fender wells
- capped and flared inside fender wells

Other Mods


Gonna probley make a how to thread to complete these custom fibreglass body work for the 3Gee, but not untill I finish my car, still gotta a lot of work to do before she's painted in 2 weeks.

:mod: :Owned2:

[Robs89LXi]

Xcelent Idea!!!! Go for it, there is only one way to learn, trial and error.
Be fully aware fibrglass is very hard to work with when faced against the forces of gravity and is messy as hell. Plan to do a lot of sanding, sanding, filling, sanding, and more sanding, glazing, and more glazing and sanding. Not as easy as some people my think...lot of fabrication to make the product look flawless....Could be a disaster, it you don't got the skill, patience, and time to finish custom fibreglass work...PERIOD!

tRY NOT TO USE A LOT OF FILLER TO FILL IN LOW SPOTS AND MISTAKES,,,SPEND THE TIME AND LAYER THE CLOTH IN THESE BAD AREAS, CUT THE SHAPE NEED, BUT MAKE SURE YOU DO IT IN LAYERS,, WHEREAS THE FISRT LAYE IS SMALLER, THEN THE NEXT LAYER SLIGHTLY LARGER,,,AND SO ON,,,,TO BUILD IT UP...

I am curretly finishing my 88 LX custom body work,, should be ready for paint in the next 2 weeks...IceMan707 is gonna have a serious contender to deal with in here, his car motivated me to attempt something that has never been done by any 3 geez member....don't have a digi cam...but when I'm finished, I'm gonna get some didgi pics and post them in here....You guys are gonna be amazed!!

Body Mods:

Custom Fab rear Bumper (seamless)
- body kit rear from???(Fabed, cut, custom molded to fit took 40+hrs)*

Custom Fab trunk Seamless (fab seam with bumper20+hrs)

Trunk Shaved

Seamless Front Bumper
- 90-93 TEG Spyder 2
- Fab custom bumper into hood (40+hrs)
- Fab custom hood release opening

Side skirts
- Custom Hand bilt from scratch (60+ hrs)
- completley seamless (even under the car)
- flares up into fender wells
- capped and flared inside fender wells

Other Mods


Gonna probley make a how to thread to complete these custom fibreglass body work for the 3Gee, but not untill I finish my car, still gotta a lot of work to do before she's painted in 2 weeks.

:mod: :Owned2:

Sounds really cool (even the second time I read it :lol: ). My advice though, is get a digital camera now!!!! That way you can take pics of the progress. If you are serious about a "how-to" on this, then the pics will be very helpful.
Many props to you though for underaking this venture. Hope it turns out good.

[A20A1]

Sounds really cool (even the second time I read it :lol: ).

:lol: It was long enough that I didn't realize it was a duplicate at first.

I fixed the problem.

[Gemini2003]

Wow thanks for that input Pro_Mod_Accord!!!!

I actually have a couple people showing me the ropes with fiberglass but what you typed has now even inpired me more!!

I was thinking of creating a mold for the front and back bumper.. Possibly by cutting and combining one or two bumpers... Would this be a good starting point?

[Pro_Mod_Accord]

If that's the avenue you wanna go,,then go for it....Gonna be a lot of work to fabricate and fiberglass a whole bumper...just remember before you attempt the whole piece is gonna have to be blanced......left side = right side.....if you have a mold fabed right it will work....

Do NOT use a lot of filler to create you pieces....BAD IDEA! Spend the time and figure out how you are going to create your custom mold for the fibreglass work...This is your base and it's very important...if you don't have the patenice to work out imperfections,,,and the frustrations associated with the messinees of fibreglass...it will be a disaster...

#1 Tip:

Use Foam Insulation in a can to create customs molds,,,but note it is messy (sticky) as hell and it doesn't like the vertical forces of gravity...prepared to get messy....but when cured it's get to shape,,,can be cut, sanded,,,it's great!!


Damm never thought of taking any pics when I fab my customs molds,,,wish I did..sorry guys...

[Pro_Mod_Accord]

If that's the avenue you wanna go,,then go for it....Gonna be a lot of work to fabricate and fiberglass a whole bumper...just remember before you attempt the whole piece is gonna have to be blanced......left side = right side.....if you have a mold fabed right it will work....

Do NOT use a lot of filler to create you pieces....BAD IDEA! Spend the time and figure out how you are going to create your custom mold for the fibreglass work...This is your base and it's very important...if you don't have the patenice to work out imperfections,,,and the frustrations associated with the messinees of fibreglass...it will be a disaster...

#1 Tip:

Use Foam Insulation in a can to create customs molds,,,but note it is messy (sticky) as hell and it doesn't like the vertical forces of gravity...prepared to get messy....but when cured it's get to shape,,,can be cut, sanded,,,it's great!!


Damm never thought of taking any pics when I fab my customs molds,,,wish I did..sorry guys...

Just waiting for my Tri-Coat paint and supples I ordered.....Base it going to be Metallic Silver BC with Candy paint over top then Cleared...gonna be sweet!!

[randall88accord]

I got a spyder kit for my 88, 4dr and i wanna talk to someone whose put one on, cuz its no simple bolt on, I think im gonna have to make my own brackets for it

[Gemini2003]

I actually thought of that... (Foam Idea) you mean like mono foam right? What is the importance of equal weight on both sides?

Aswell how many layers would be considered minimum? and what would be considered the maximum ammount of layers?

[Pro_Mod_Accord]

I actually thought of that... (Foam Idea) you mean like mono foam right? What is the importance of equal weight on both sides?

Aswell how many layers would be considered minimum? and what would be considered the maximum ammount of layers?


Any type of insulating foam in a can will work...3-4 layers min. you can use as much as you want...I wouldn't use more then 6 layers...can get pretty thick...

Yah the Spyder bumper has to be customized to fit our cars....defietly use some type of lower brackets by the fender wells..they have a tendency to bounce...

[Pro_Mod_Accord]

When I say balanced, I am referring to creating one area that is identical to the opposite side....this is were custom molding is time consuming....one side looks great but then you have to fabricate and duplicate the other one to match up...could be a disaster.....

[Gemini2003]

I'm sorry I should have been more specific....

"As well how many layers would be considered minimum? and what would be considered the maximum amount of layers?"

(Referring to the fiberglass laying itself)

I know it's dependant on where you need the strength but is it advisable to do a minimum of 2 layers of fiberglass ?

[daamizin1]

heres my car domain site, i have the spyder kit on there.

http://www.cardomain.com/ride/2110099

[ran1]

I am looking for a kit for an "89" 2 door accord ware can i find it

[ran1]

I am looking for a kit for an "89" 2 door accord ware can i find it

[gfrg88]

dude read the damn thread!!!

[2GeeRide]

hi, i'm new and i'm just wondering if anyone knows where to get a bodykit for a 1985 honda accord hatch. my uncle just gave it to me and i'm trying to make it a project ride. thanks!

[Aer0deck]

doesn't body kits ruin the aerodynamics?
i's still not sure if i should get one.... and if i relly want to get a body kit i will go to a specialized tunner to make something really special!!! i just need the money!!!

[thegreatdane]

Aer0deck, where are you from?

[Aer0deck]

its a secret... far far away from you guys:rant:

[Lockleaf]

I'm sorry I should have been more specific....
"As well how many layers would be considered minimum? and what would be considered the maximum amount of layers?"
(Referring to the fiberglass laying itself)
I know it's dependant on where you need the strength but is it advisable to do a minimum of 2 layers of fiberglass ?


Laying glass for strength depends on a couple of things.

1. curves add strength

2. number of layers depends strongly on weight and weave of glass.

Fiberglass comes in many different weights (this refers to thickness) and weaves that are better applied for different purposes. Thinner glass will mold more complex designs. Thicker glass will require significantly less labor. You can also get glass that is woven tightly or loosely like fabric, or you can get glass that is woven like plywood - every which way. Straight rigids lays are better done with plywood weave. They are stronger. Curvy lays are better done with fabric woven, it bends and molds more predictably.

I've only done small projects in glass, like a set of custom speaker pods in my brothers 91 civic, but so far that is all I've picked up. If somebody knows more or sees need to correct me go for it. And if you really want to know about forming glass, go to your nearest boat repair and construction shop. Nobody throws glass like a boatbuilder.

Later.
Lockleaf

[A18A]

i think the aerotech bodykit should go on here :)

[JeepinGoose]

just thought I would throw this out there, in case it wasnt allready known



http://www.grounddynamics.com/merchant/site/import_body_kits.htm

[LiTtLe xOx BitT]

just thought I would throw this out there, in case it wasnt allready known
http://www.grounddynamics.com/merchant/site/import_body_kits.htm
That was already posted a few times.

[gamenerd]

:-)

[LiTtLe xOx BitT]

How hard it will be to make it fit all depends on how much you know and how skilled you are. If you do body work and bodykits a lot then it won't be too bad, If you have never done anything like it before then you will probably not want to buy a complete bodykit and start cutting it because there is a chance it won't work. What you should do is go to the junkyard and buy a bumper off a 90-93 accord and see how hard it will be to customize it, because then you will be able to figure out wether you think your confident enough to put out the money and try or maybe decide doing a custom kit will be too hard. There are a couple companies that sell bodykits for the 3geez if your interested in that.

[bullard123]

doesn't body kits ruin the aerodynamics?
i's still not sure if i should get one.... and if i relly want to get a body kit i will go to a specialized tunner to make something really special!!! i just need the money!!!
What??? Where did you hear that? Bodykits and spoilers improve aerodynamics.

[H22AccordSE-IV]

Check this out...the 02-05 Civic and the 04-05 1.7 EL have the same lip, rocker (or whatever you call it) under the doors, ours just sticks out a little further, so there would be a slight gap between the skirt and the doors. Only 3 cm needs to be cut off the skirts' length to make 'em fit our cars. I'm lookin' at a set of 1.7 EL skirts - they retail for $857.00 a pair which is a little fu*kin' rediculous, but I found 'em on clearance for only $184.00!!! Apparently the 1.7 EL wasn't that popular so Acura is clearing out all of its accessories at up to 80% off.
http://img85.imageshack.us/img85/3324/acuraelskirts7lg.jpg

I also managed to custom fit a 94-97 Accord Stillen Touring lip on the original 3rd gen bumper. Don't laugh, but I cut pieces off of a plastic paint tray to extend the lip on the sides, just need to mould everything together. Check out the pics and tell me what y'all think.
http://img88.imageshack.us/img88/4382/lip14lk.jpg
http://img97.imageshack.us/img97/3883/lip25is.jpg
http://img97.imageshack.us/img97/8985/lip37rd.jpg


I'm workin on a flush headlight conversion as well and Photoshopped a few concepts. Also included a pic of the headlight cover I cut, but still haven't decided how to mount it. As of now I have 2 Hella 90mm headlight modules (low beams) temporarily mounted on the original brackets for the retractable headlight assemblies. Still workin' on fab of the new bracket to mount both high and low beams.
http://img109.imageshack.us/img109/7279/accordheadlightconversioniiiic.jpg
http://img109.imageshack.us/img109/6203/hlcov15jl.jpg
http://img109.imageshack.us/img109/796/h22084ib.jpg

[Cheeseburger]

ohhh dam dude thats going to look sweet!! keep us updated

[H22AccordSE-IV]

Thanks, Cheese. You know I will!

G.

[Bones]

Just doing a search for body kits and ran across this one at extreme dimensions

http://www.extremedimensions.com/7441.html

I hadn't even seen this one mentioned on 3geez before and the listing was dated just last month so .... sorry if this info has been posted before.

Ive seen pics of the Kaminari, Xenon, And Erebuni kits before but this one is NOTHING like any of those! Kinda goofy looking back end but the front is a bit more up to date looking than the others.

[LiTtLe xOx BitT]

Just doing a serch for body kits and ran across this one at extreme dimensions
http://www.extremedimensions.com/7441.html
I hadn't even seen this one mentioned on 3geez before and the listing ws dated just last month so .... sorry if this info has been posted before.
Ive seen pics of the Kaminari, Xenon, And Erebuni kits before but this one is NOTHING like any of those! Kinda goofy looking back end but the front is a bit more up to date looking than the others.
If you look like 6 posts down its on that post, its called the bx2 on that site.

[HostileJava]

The coupe and hatch are the same length on the side from wheel to wheel.

[roadkill]

I want to fit my '89 Aerodeck with an '90-'93 Integra front bumper, but I'm not shure it'll fit. I noticed that there are 2 different front bumpers for the accord. The sides of the bumper are different in lenght. (don't know if that has to do with the 87-88 and 88-89 model) I already ordered a wrong bumper once (with shorter sides) and I really don't want to do that again.

Could anybody tell me if an integra bumper fit's ??(with some small modifications)

[HostileJava]

I want to fit my '89 Aerodeck with an '90-'93 Integra front bumper, but I'm not shure it'll fit. I noticed that there are 2 different front bumpers for the accord. The sides of the bumper are different in lenght. (don't know if that has to do with the 87-88 and 88-89 model) I already ordered a wrong bumper once (with shorter sides) and I really don't want to do that again.
Could anybody tell me if an integra bumper fit's ??(with some small modifications)

Unless the aerodeck is different all the bumpers are interchangable between the 86-89 for all body styles and models in the US.

[roadkill]

I think they've delivered me the wrong bumper :@

I'll place the order for the integra bumper right away!

[HostileJava]

I think they've delivered me the wrong bumper :@
I'll place the order for the integra bumper right away!

Keep in mind those of us who did it used the bumper support and metal brackets from the inside of a stock teg bumper and mounted the skin to them. So you'll need to pickup that from the wrecker.

[LiTtLe xOx BitT]

What kit did you order? All the body kits say direct bolt on, but they never are. I have the "spyder" bodykit, and i think it was just one off a 90-93 accord or teg because i had to cut and mold some pieces to make it fit.

[roadkill]

i didn't order a kit, but just a cheap imitation for about $25,-. With some cutting i made it sort of fit. I know the "spyder" bumper doesn't fit properly, because thats the reason the dealer here in Holland wouldn't even import it anymore.

I can't just use the bumper supports of an integra because that model has never been sold here. I hope it isn't to hard to make my own or adapt the accord's original.

[Sketchy]

From the past experiences it looks like the best way to go with things is the 90-93 Accord rear end, 90-93 Accord sides (have to cut about 4 inches off), and the 90-93 Integra front. This mostly goes for the sedans and coupes, the hatch rear bumpers are shorter so they're harder to find something to make fit.

So 90-93 Integra kits will bolt onto my 89 Accord or will i have to do some minor work? yes, i'm a n00b so let thy bashing begin! :rocket:

[HostileJava]

I'd suggest reading the whole thread, it's only 8 pages.

[LiTtLe xOx BitT]

http://images.google.com/imgres?imgurl=http://www.bodykits.org/_pics/84101products31promo_pic.jpg&imgrefurl=http://www.bodykits.org/cart/view_product.html%3FItemID%3D31&h=174&w=400&sz=17&hl=en&start=161&tbnid=zw64BzuRaJsnAM:&tbnh=54&tbnw=124&prev=/images%3Fq%3D1988%2Bhonda%2Baccord%26start%3D160%2 6ndsp%3D20%26svnum%3D10%26hl%3Den%26lr%3D%26ie%3DU TF-8%26sa%3DN

[rjudgey]

I really like the Style Auto ones and apparantly the wheels are one offs that they still have in production too!! I like those as well still looking for a nice clean 3G aerodeck and when i frind one i might put this kit on it too!!
www.styleauto.de
697 Euros or £477 pounds which isn't too bad shame the fitting will cost nearly twice as much to have done properly!!
http://www.styleauto.de/bilder/gross/216_1.jpg
http://www.styleauto.de/bilder/gross/216_0.jpg
http://www.styleauto.de/bilder/gross/216_4.jpg

[boybomber]

So 90-93 accord kits are possible for 89's??

[ghettogeddy]

with modification im sure

[boybomber]

Hey alright! Wow this site really helps huh? Real cool.

[bigman652]

enebui sideskirts are sex@@!!!!

[mkm2175]

i like the Dm kits aand u can fidn them generally on ebay a full body kit for under 400 and they look sweet ;)

[buttaz1]

so will only the 98 civic avenger kit will work?
or can i put a body kit form a 98 civic on ti and how can i make the kit fit right?

[3geeandEF]

so i looked athte kaminari website, and the picture on the first page with teh fog lights doesnt look the same as on teh website. whats up with that?

[MessyHonda]

so i looked athte kaminari website, and the picture on the first page with teh fog lights doesnt look the same as on teh website. whats up with that?



they made a 86-87 style and the 88-89....IMO 88-89 looks clean. they stop making these kits a while a go....so you can only get one if they are in a warehouse or used.

[Lockleaf]

u guys have completely missed the nicest bodykit ever put on a 3G, courtesy of srkyboy. no one i know of knows what it is but it's lovely, no?
http://www.89accord.com/srkyboy881.jpg
http://www.89accord.com/srkyboy882.jpg
http://www.89accord.com/srkyboy883.jpg

[2oodoor]

No yes
somebody dumped some nice clear on the that thing, beautiful car.... smoked tails?

[A18A]

looks like a xenon kit

[Junior11]

I want a front an rear lip kit and side skirt that replicat the type-r lips for the civic type-r in japan..............im new to the 3g i just picked up a 88 coup w/9300 an i love it for a daily driver but i need more looks an power........pleas let me know if any one know where i can find lip kits

[88ctlxi]

u guys have completely missed the nicest bodykit ever put on a 3G, courtesy of srkyboy. no one i know of knows what it is but it's lovely, no?
http://www.89accord.com/srkyboy881.jpg
http://www.89accord.com/srkyboy882.jpg
http://www.89accord.com/srkyboy883.jpg

i agree that is the best looking kit ibve seen thats why i have it hahaha.....:cheers:

[Low_Rida]

my comment to that bodykit is WOW if anyone finds out what that bodykit is can you please pm me. I need a bodykit but im holding off till i find the right one.

[lostforawhile]

i hate to bring this back up again,but has anyone ever tried to see if an aerodeck rear bumper would fit a hatch?

[A18A]

to me the aerodeck bumpers look shorter than hatch ones
http://thegreatdane.homepage.dk/3geezgarage/greyblackblue.jpg
http://i22.photobucket.com/albums/b307/badubagabi/DSCN0680.jpg
might just be the angle of the pics though

[codyJDM]

I agree, never noticed that. The Aerodeck rear bumper does look a lot shorter.

[thegreatdane]

They are a lot shorter.

And the above mentioned bodykit is a Xenon bodykit.

[Rolin' Stock]

u guys have completely missed the nicest bodykit ever put on a 3G, courtesy of srkyboy. no one i know of knows what it is but it's lovely, no?




does anyone know what kind of kit this is...im pretty interested

[A18A]

it's a xenon body kit

[bryan6732]

I've got StyleAuto front- and sideskirts and Polybauer rear skirt. StyleAuto still makes bodykits for all 3geez.

I guess Polybauer is some German guy who creates bodykits from standard bumpers, although I've never seen front- or sideskirts from them.
All I've seen were Aerodeck rear skirts. Has anyone heard from him before?

[Xaisk]

i agree that is the best looking kit ibve seen thats why i have it hahaha.....:cheers:

Dude.. that kit would look fucking SICK on a hatch... Just modify the tailights to look a bit better and that would be just,.... sick.......

I want that.............................................. ............... :drool:

[JeromyA20A1]

I have an 89 hatch, original bumbers are still on it and in great shape but looking for something similar to yours. where did you find yours?

[senna89]

I am looking for the genuineHonda acessories bodykit... Does anyone of you know how i can find it or who is the actual manufacturer?

imageshack.us/photo/my-images/33/img050q.jpg/

imageshack.us/photo/my-images/534/img069dk.jpg/

imageshack.us/photo/my-images/714/img070f.jpg/

[lostforawhile]

I am looking for the genuineHonda acessories bodykit... Does anyone of you know how i can find it or who is the actual manufacturer?

imageshack.us/photo/my-images/33/img050q.jpg/

imageshack.us/photo/my-images/534/img069dk.jpg/

imageshack.us/photo/my-images/714/img070f.jpg/
you aren't going to find it lol

[gfrg88]

I am looking for the genuineHonda acessories bodykit... Does anyone of you know how i can find it or who is the actual manufacturer?

imageshack.us/photo/my-images/33/img050q.jpg/

imageshack.us/photo/my-images/534/img069dk.jpg/

imageshack.us/photo/my-images/714/img070f.jpg/

Good luck buddy!! I think a lot of people would have that if it were this easy to find...

[joshskillz]

Can't see any pics. Too old?

[senna89]

Yes, I don't know, why its no more available... Anyway here are some Pics of the Bodykit... By the way: After a very long and hard search I finally found it and mounted it to my car!!!

6110
6111
6112
6113
6114