New here; just wondering Accord b20a on a 3rd gen lude. possible??

[Ormiga90]

well, honestly i'm a prelude guy i got an '884ws, '90SI and '99 Base....but i have nothing against accords. anyway
i've been reading a lot of info on the JDM accord B20a on this site.
the accord & prelude JDM engines from what I read are almost identical. the motor mounts, well you can cut and weld almost everything. i'm just wondering if a K4 AT or a m/t tranny from a 88-91 prelude can fit the Accord b20a. I read somewhere you can't, but only if you're going to put it in a 86-89 accord or 84-87 lude. i mean if the two engines are so simillar, wouldn't the 88-91 prelude transmissions physically fit? but not sure if it's possible, but if not i'll get the JDM prelude b20a . however, it would be nice having an extra 15hp on my 88 lude.

[carotman]

nope, won't work.

[rjudgey]

Go to Preludepower.com for some engine ideas, swapping in a original B20A into a later 3G lude is not really worth the effort, just get a JDM B20A* 3G engine or a B21 engine and drop that in, should be at least 150bhp as stock. Might be worth see if you can drop a newer B series in i've seen H series in a 3G that would be worth looking into.

[hondarulz]

will the 84 lude b20a gold top fit in a 86 b20a gold top??????????? my cambelt snapped in my accord and made a real big mess but i have the lude witch is my speedway car moytor runs perfect is the swap possible

[hondarulz]

if u know email me on [email protected]

[hondarulz]

nope, won't work.
will the b20a gold top out of 84 lude fit in 86 accord b20a goldtop?????/ any faq would be good

[hondarulz]

nope, won't work.
both engines lean foward ??????????