PDA

View Full Version : 2.0i-16 on the dyno today


thegreatdane
05-30-2005, 08:05 AM
This is with 100% stock engine, and the airfilter and sparkplugs could need replacing.

http://www.3geez.com/forum/attachment.php?attachmentid=4317&stc=1

http://www.3geez.com/forum/attachment.php?attachmentid=4318&stc=1

144.7HP at 6184rpm. Rated at 137HP / 6000rpm stock.
The torque converted to your scale is 135.5 lbs/ft. Rated at 127.6lbs/ft / 5000rpm stock.
diegoaccord
05-30-2005, 08:20 AM
Probably making more HP than the B16A in my Civic coupe. In fact I know it is.

Good shit.

Damn.
88accordhb
05-30-2005, 08:44 AM
nice, more then 98 % of the people on the board. tho i both b20's made more power than that.
thegreatdane
05-30-2005, 09:06 AM
The Japanese B20A's does make more power than this, but this is the Euro B20A which has a bit lower power output due to small changes.
smufguy
05-30-2005, 09:11 AM
thats really nice, i like the torque curve on it. A pic of your engine bay would be great.
thegreatdane
05-30-2005, 09:14 AM
Engine bay: (more pics in a thread I made a couple of months ago when i got it)

http://home.tiscali.dk/uplort/Accord/16v-engine.jpg
Justin86
05-30-2005, 10:01 AM
damn that is nice and clean :D
Legend_master
05-30-2005, 10:23 AM
Engine bay: (more pics in a thread I made a couple of months ago when i got it)

http://home.tiscali.dk/uplort/Accord/16v-engine.jpg


:eatarrow: :eatarrow:
sporkHSP
05-30-2005, 10:47 AM
Im gunna come overseas and take that beautiful beast from you. just FYI

just kidding, but seriously those are some nice numbers, and its an aerodeck none the less. Love that car.
Legend_master
05-30-2005, 11:08 AM
Im gunna come overseas and take that beautiful beast from you. just FYI

just kidding, but seriously those are some nice numbers, and its an aerodeck none the less. Love that car.

I think it is a sedan not an aerodeck.
carotman
05-30-2005, 01:28 PM
Sweeet

I got to dyno mine then.

I'm surprised how flat the torque curve is with the stock manifolds.
thegreatdane
05-30-2005, 01:28 PM
Thanks, and Legend_master is right, this one is the sedan.
thegreatdane
05-30-2005, 01:30 PM
Hey carot, you read my pm yet? I'm surprised about the torque as well actually.
Busted_Blue
05-30-2005, 07:40 PM
Sweeet

I got to dyno mine then.

I'm surprised how flat the torque curve is with the stock manifolds.

I'm also suprised.
Cheeseburger
05-31-2005, 08:32 AM
sweet. BTW you got a clean looking engine bay
w00tw00t111
05-31-2005, 01:23 PM
That engine is awesome!
Lok
06-01-2005, 05:27 AM
These numbers, are simply superb!!!!!!!!!!!!!!!!!
The torque-graph looks better than the newer I-VTEC engines!!!!!!!!!!!!!!!(THE 95mm STROKE)
The results is unbelivable for stock B20A2 engine!!!!!!!!power at 6750rpm!!!!!!!!
Superb!!!!
Congrats thegreatdone for the results.
Just a question what type of dyno was this??? Dynomet? VAMAG? somethink else??
I think B20 engines have a lot of potential but in USA the majority of 3geez members
with B20A engines, use stock A20 ECU to run the jdm B20A(because of lack of jdm ECU).
This is no good because you can't run one 160hp engine with one ECU maped for one
120hp engine....................you loose a lot of potential especially if you have and other mods like free flow exhaust, CAI, etc.
Also you loose a lot of power when run jdm B20A engine with 6500rpm rev cut when
the euro B20A2 with the wickest cams has rev-cut at 7000rpm and make power even at 6750rpm!!!!!!!!!!
So the best and first mod for the US B20A members (if they haven't got the Jdm ECU)
is a stand alone dynotuned ECU , in my opinion, to take out all the potential of B20A engine.
snow_man_20
06-01-2005, 05:35 AM
Thanks, and Legend_master is right, this one is the sedan.


Thats the new sedan you bought huh? The one with very few miles on it. Almost a new car.

good #ers
thegreatdane
06-01-2005, 06:14 AM
That's the one yea :)

Thanks Lok. I dont know what type of dyno it is but I can probably find out if you'd like to know? But the main thing about a dyno i think is how it's tuned. You can compare my numbers to the numbers foobari from Finland made with his 2.0i-16 and you'll see that they're almost excactly the same. You can see foobari's dyno thread here: http://www.3geez.com/showthread.php?t=27388
I think that his K&N short ram filter is one of the reason why his grahps are just a little disturbed compared to mine.

We'll see what this engine can do :)
Civvy
06-06-2005, 04:44 AM
Smooth dude, i'll have to get mine dynoed soon too. I removed the filter and the headlight to run a straight cold air pipe and we ran a flat 15 last sunday. everything else stock even the exhaust!
Carot u gona give up the jap cams yet?
TheWatcher
06-07-2005, 03:53 AM
thegreatdane,

Do you have any other mods besides the leather steering wheel? I nominated your 3g for AOM, and I would like to update the post if there is more information.

I didn't know if anyone else would nominate you, whereas, I just knew someone would re-nominate Busted Blue. :) Check out the AOM July nomination thread.

BTW, "deadstock" is a term used for shoes (like Air Jordans, etc.). "Deadstock" is reserved for new shoes w/o any flaws that have never been worn, essentially the highest grade for people buying and selling shoes.

Peace.
thegreatdane
06-07-2005, 01:45 PM
Thank you for the nomination. The steering wheel is a stock wheel, but because it's a 2.0i-16 it's a leather steering wheel. It does have other mods, but the car is in the bodyshop getting some things done at the moment and will be going to the painter this week, so I wont have any pics of the stuff right away. But I've installed Koni reds in the front and rear with a set of 40mm lowering springs and put on 17" Kosei Sniper rims.
TheWatcher
06-07-2005, 05:51 PM
Updated mods!

thegreatdane - PM me on any further modifications to your 3g, corrections/additions to the AOM nomination thread and I will update it.

Peace.
gfrg88
06-07-2005, 06:05 PM
thats probably one of the best, cleanest, stock accords. keep up the great work man:)
HondaBoy
06-08-2005, 08:26 PM
impressive to me. nice line of torque. that's what i wish my A20 could do, guess i'll just have to get the B20 JDM. althought its supposed to make 23hp more than yours suppose. that's great though. it must have really nice pick up. you should do a 0-60 mph or 0-100 kph. maybe if you can get ahold of a G-tech type tester that you can just plug in. you know just to give us an idea.
TheWatcher
06-15-2005, 07:04 PM
It does have other mods, but the car is in the bodyshop getting some things done at the moment and will be going to the painter this week, so I wont have any pics of the stuff right away.
Do you have any new pics or any new mods? I want to update the AOM post, since voting starts on the 21th.

Peace.
thegreatdane
06-15-2005, 09:22 PM
Sorry, I didnt get it back from the paintshop yet. They were slow at the bodyshop...
TheWatcher
06-18-2005, 04:42 AM
thegreatdane,

This is the last chance for me to add any additional mods and/or updated or new pictures to the AOM nomination thread. According to the AOM rules, the nomination thread will be locked on the 20th (Monday).

Hope the strut bar problem works itself out. :)

Peace.
thegreatdane
06-18-2005, 06:31 AM
Thanks.
It would probably be better to have a nomination of my accord next month instead, then it would be all done with a couple of more changes. I had some problems with the bodyshop, it was sent to the painter but had to go back to the bodyshop to get something fixed, so it isnt going to the painter until monday. And then the painter also scratched my new rims when he had it on his trailer... :mad:

How it looks like right now, only the trunk and tail lights is also removed (not really AOM stuff hehe):
TheWatcher
06-19-2005, 03:53 AM
Thanks for the reply.

Sorry to hear about the rims.

Peace.
steven
06-30-2005, 07:44 PM
that engine looks the the JDM 4th gen civic SI motor (DOHC ZC.)
http://img243.echo.cx/img243/2792/carpics10288am.jpg
rjudgey
07-01-2005, 03:36 AM
Thats because they were both designed at the same time, if you look at Honda Williams/Mclaren F1 1.5 litre V6 with twin turbo engine even that looks the same has the same rocker cover design.
shepherd79
07-01-2005, 09:25 AM
man, it looks like you may have JDM B20 since that is about right for that motor to make that power at the wheels.
carotman
07-02-2005, 06:28 AM
I'm sure the Euro B20A was underrated.
TheWatcher
07-17-2005, 12:34 PM
Thanks.
It would probably be better to have a nomination of my accord next month instead, then it would be all done with a couple of more changes. I had some problems with the bodyshop, it was sent to the painter but had to go back to the bodyshop to get something fixed, so it isnt going to the painter until monday. And then the painter also scratched my new rims when he had it on his trailer... :mad:

How it looks like right now, only the trunk and tail lights is also removed (not really AOM stuff hehe):
thegreatdane,

Can you update me on the status of your mods? :)

Peace.