View Full Version : Anyone know how to wire up a amp fan?
Mike's89AccordLX
06-03-2005, 11:33 AM
I bought an electric Stinger DC Brushless Fan for my amps. Except there are no instructions. There are 2 wires. One is red (positive probably) and the other is blue.
I'm confused if that goes to the remote wire or what. It would have to need a ground some how right?
I asked the guy I bought it from at the store and he didn't know.
-Mike
geesnow
06-03-2005, 12:09 PM
that sounds right
spades27
06-03-2005, 12:43 PM
if red is positive then blue cant be remote
there needs to be a ground
maybe put the red on remote and ground for blue
mouchyn
06-03-2005, 05:23 PM
if red is positive then blue cant be remote
there needs to be a ground
maybe put the red on remote and ground for blue
bingo.
i wouldn't put the fan right on the amp remote wire, though. i would, however, use a relay that is controlled by the amp remote wire.
Vanilla Sky
06-03-2005, 05:29 PM
just for future reference, you can run a fan from 2 varied positive voltage sources... quite computers sometimes run the fans at 7 volt but connecting the positive of the fan to the 12v and the ground to 5v, thus there being seven volts difference between the two sources...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.