Pictures of my Accord's replacement. (95 Teal Teg)

[danronian]

This is my 95 Integra LS I bought to replace my daily driver and show car. I know it's no show car now but at least it is as fast as the malibu and minus the rear bumper it has great paint. I can't wait to wax it, get a new bumper, and replace the fartcan with a cat-back. The interior is very dirty but once I get it shampood I'll post some pics of that too. The engine is very clean and amazingly it only has one leak, at the cam plug. ONce that is replaced and the ABS leak is sorted out it will be one very dry engine bay. I cleaned and shined it all up but I just didn't get a chance to take a picture of it yet. The engine is currently stock minus the SR intake from the accord. It came with a broken coilover sleeve up front so I had to quickly purchase some springs so for the time being I have dropzone coilovers up front (actually the same spring rate as the Skunk2 coilover sleeves I was planning on buying), and Skunk2 lowering springs in the back. THe front already has the blue tokicos but I know they won't handle the DZ coilovers and since the back is oem struts I am currently deciding on some struts for the car. Just b/c I heard they will last a while and b/c they are cheap I'll probably just get the DZ struts ($200 a set) and use them until they blow and by then I'll have enough for a full coilover Tein or skunk2 setup. These are the same wheels I had on the accord but currently the car is rolling on 2000 Integra LS mesh wheels. As soon as I get some tires installed on them, get an alignment, and install my poly motor mounts the car will be good enough for me at least for a few months.
http://i20.photobucket.com/albums/b222/danronian/HondaIntakePics006.jpg
http://i20.photobucket.com/albums/b222/danronian/HondaIntakePics007.jpg
http://i20.photobucket.com/albums/b222/danronian/HondaIntakePics004.jpg
http://i20.photobucket.com/albums/b222/danronian/HondaIntakePics003.jpg
http://i20.photobucket.com/albums/b222/danronian/HondaIntakePics002.jpg
http://i20.photobucket.com/albums/b222/danronian/HondaIntakePics001.jpg

[Busted_Blue]

want to sell me your LS mesh rims?

[danronian]

Only for some GSR blades.

[frankie89]

that teg is tight..good luck with it..

[SteveDX89]

Looks great man. All you need now is the JDM front. :)

[MattsAccord]

Looks good. :cheers:

[Cheeseburger]

looking good bro!

[88accordhb]

they should have a sponsor that gives you money when you see or hear the word integra. fuck i'd be a rich ass bitch.

[88accordhb]

oh btw, nice Integra, go k20 yo. only 7 grand! really really fast. hehe.

[Pana23]

Looks great !! :cool:

[danronian]

Thanks for the comments. Here's some pics with the 2000 teg LS mesh wheels installed. I really like these alot more other than the fact that the tires are bald on them.
http://i20.photobucket.com/albums/b222/danronian/HondaIntakePics008.jpg
http://i20.photobucket.com/albums/b222/danronian/HondaIntakePics010.jpg
Here is a shot of my super clean engine bay. I used the shine/degreaser cleaner by Black Magic and it worked amazingly. Kind of messed up the finish on my valve cover but my friend is giving me the newer style LS type so I don't much care about the finish on this one. It came with this new filter and I adapted the SR from a del sol, to the accord, and then to this so that is why it isn't the prettiest thing. Once I get the ABS related brake problem fixed, an alignment done, and new tires, I need to replace these plugs, the cap, and the wires since they are original and probably should be replaced.
http://i20.photobucket.com/albums/b222/danronian/HondaIntakePics013.jpg