PDA

View Full Version : Hyperthetical B20 q!!


Civvy
06-24-2005, 04:41 AM
Just wondering (hyperthetically) whats the maximum displacement we could get from the B20??
Thinking of stroker kit, re-sleeve? and anything else you could think of.....
some guy used a stroker kit on the 'A' series and reached 2400cc!!
I guess the maximum would have to stop as far as the water jackets or when the head combustion chambers start to develop valve pockets?? :welcome: :rice:
AccordEpicenter
06-24-2005, 06:44 AM
sounds like a nightmare. Somebody had a stroker kit for the a20? It either uses mad overbore, or makes the stroke bigger, neither of which is a good way to go in either engine
thegreatdane
06-24-2005, 07:04 AM
Longer stroke in a B20A is a bad idea I think. Rather get a B18A engine with the shorter stroke. (good luck finding one though)
Helix
06-24-2005, 07:31 AM
hypathetically, not HYPERthetically. Other than that, I have no idea.
Justin86
06-24-2005, 07:50 AM
yea your best with a B18 and getting a storker/bore kit to 2.2L
mykwikcoupe
06-25-2005, 12:33 AM
Id think lkeeping the stock stroke and boring it to try and get more of a square bore or at least a better ratio would be a good thing. Sleeves are good enough now Id trust them as long as they didnt go too overboard on the bore and the shop specialized in import sleeving. I could see 2.2l from a b20
SQ is the SQUAD
06-25-2005, 09:06 PM
i am lllookng to get my b20b block bored out to 85mm
MrBen
06-25-2005, 10:31 PM
hypathetically, not HYPERthetically. Other than that, I have no idea.

HypOthetically, not hypAthetically ;)
carotman
07-02-2005, 06:44 AM
Longer stroke in a B20A is a bad idea I think. Rather get a B18A engine with the shorter stroke. (good luck finding one though)

Indeed. The B18A would be a better choice for high revving. Well, I get my B20A up to 7200 rpm os it's really not that much of an issue.