$5000 for engine swap?

[drewtyson]

So I have finally saved up $5000 for an engine swap and was wondering which one I should go with. I want to make about 250hp if possiable but would be happy with a little over 200hp

H22A(200hp)-- 2500 motor/wiring harness/ecu/axles/trans/etc
500 custom motor mounts
2000 install
5000 total

or a b- engine

b18 or b20 or b20 vtec

When posting if you could list the cost of the items to build the b- engine, cost of engine, and rough estimate on the cost to install.

[Vanilla Sky]

hate to say this, but search.

[SteveDX89]

hate to say this, but search.

:werd:

[masterkillalw]

b18 with a b16 vtec head...get a slight bore out of the block and run a lil higher compression with v-tec and some simple bolt-ons such as exhaust, cams, lightweight pulleys and an intake and u will be seeing 200...price all depends on what u want for a name...good luck...

[88accordhb]

b18 with a b16 vtec head...get a slight bore out of the block and run a lil higher compression with v-tec and some simple bolt-ons such as exhaust, cams, lightweight pulleys and an intake and u will be seeing 200...price all depends on what u want for a name...good luck...
it's not as easy as that....youre talkin about a bseries in a CA. no one makes any swap accessories for these cars. and good luck finding a shop that will spend time fabricating everything.

get a b20a with that money if you can find one, don't waste your time goin vtec and all that crap.

[shepherd79]

So I have finally saved up $5000 for an engine swap and was wondering which one I should go with. I want to make about 250hp if possiable but would be happy with a little over 200hp

H22A(200hp)-- 2500 motor/wiring harness/ecu/axles/trans/etc
500 custom motor mounts
2000 install
5000 total

or a b- engine

b18 or b20 or b20 vtec

When posting if you could list the cost of the items to build the b- engine, cost of engine, and rough estimate on the cost to install.


$5000 is not near enough for the swap. plus how do you expect to gain 250hp just from the swap. you will need even more money to get to that goal.

this is what i recomend. take this money. rebuild your A20A motor to handle 15psi of boost, add stand alone menagement system and tune it. but even if you go with turbo, $5000 is about half of what you will need.

[Magny]

it's not as easy as that....youre talkin about a bseries in a CA. no one makes any swap accessories for these cars. and good luck finding a shop that will spend time fabricating everything.
get a b20a with that money if you can find one, don't waste your time goin vtec and all that crap.

I know this is a rather odd pull up of an old thread, but........CT........I know of a shop in our area that will do it. Been talking to a motor head that changes my clutches on ll my cars when I need it, and he says he will do it for me. Just depends on the application.

[Cheeseburger]

go with a jet engine...

[AccordEpicenter]

lol i make 270hp with like $2000 in parts haha

[Accordtheory]

lol i make 270hp with like $2000 in parts haha

Ok, cool guy, let's see the dyno chart..:)

[Accordtheory]

So I have finally saved up $5000 for an engine swap and was wondering which one I should go with. I want to make about 250hp if possiable but would be happy with a little over 200hp
H22A(200hp)-- 2500 motor/wiring harness/ecu/axles/trans/etc
500 custom motor mounts
2000 install
5000 total
or a b- engine
b18 or b20 or b20 vtec
When posting if you could list the cost of the items to build the b- engine, cost of engine, and rough estimate on the cost to install.

If you already are accounting for the axles and the mounts, where the hell does the $2k install cost come from? I say get an h22. People will probably disagree, but I don't care. The h22 is powerful, more torquey, and heavier than the b series, but not the a20. Thus providing weight over the drive wheels upon acceleration, unlike the b series, which is at home in a crx. Or my car, soon enough..