PDA

View Full Version : need meaasurment please b20a



b20a86lude
08-19-2005, 06:31 AM
i need someone with b20a that has it in there car to measure form me the center of thecrank shaft pulley that runs the alternator belt to the center of the alterntor pulley if someone could help me out that would be awsome thnx :rockon:

rjudgey
08-19-2005, 07:01 AM
If i get a chance i'll have a looki have to change the belt this weekend as some point hopefully but it's raing hard at the mo so will have to wait till it stops!!

carotman
08-21-2005, 08:40 PM
Why do you need that? If you want to get an alternator belt, just use the GATES 3PK805. This the one I use. It seems to be a bit long but it might just be because it got longer over the time. It seemed to be fine when I installed it and http://www.honda-oz.org.au lists the belt has being the correct one.

b20a86lude
08-22-2005, 06:13 AM
:idea: i dont have gates anywhwere around me for one and no auto store i go to has it and i odnt have an idler pulley or power steering or ac so i need a belt for just the alterantor

carotman
08-22-2005, 06:32 AM
Well, the Dayco belt should be the same part number. Napa carries Both I think (they carry Gates for sure).

The belt I gave number I gave you should fit without problem. It goes from the crank pulley to the alternator without interfering with any other pulley of any sort.


www.napaonline.com

NAPA AUTO PARTS
Genuine Parts Company (704) 334-8618
1041 Central Avenue Charlotte NC, 28204

NAPA AUTO PARTS
Genuine Parts Company (704) 523-8446
4442A S Boulevard Charlotte NC, 28209

NAPA AUTO PARTS
Genuine Parts Company (704) 399-7451
4101 Wilkinson Boulevard Charlotte NC, 28208

NAPA AUTO PARTS
Genuine Parts Company (704) 567-6272
6181 E Independence Blvd Charlotte NC, 28212

NAPA AUTO PARTS
Genuine Parts Company (704) 596-7676
5920 N Tryon St Charlotte NC, 28213

NAPA AUTO PARTS
Genuine Parts Company (704) 588-3135
8914 S Tryon St Charlotte NC, 28273

NAPA AUTO PARTS
Genuine Parts Company (704) 392-7392
5312 Rozzells Ferry Rd Charlotte NC, 28214

NAPA AUTO PARTS
Genuine Parts Company (704) 889-6272
531 N Polk St Pineville NC, 28134

NAPA AUTO PARTS
Genuine Parts Company (704) 573-4446
10120-A Albemarle Road Charlotte NC, 28227

NAPA AUTO PARTS
Genuine Parts Company (704) 596-4121
6360 Satesville Rd Charlotte NC, 28269

-----------------------------------------------------------------------

Shop NAPAonline
Search Results

NAPA Belts and Hoses Belt - Water Pump & Alt
Usually ships in 24 hours. NBH25030323 3PK805 $ 12.29

NAPA Belts and Hoses Belt - Fan & Alt
Usually ships in 24 hours. NBH25030323 3PK805 $ 12.29



Just call them and ask for part number NBH25030323 or 3PK805.

That's exactly the belt I use.

carotman
08-22-2005, 06:46 AM
This belt is even what Honda uses as their OEM parts in Japan...

http://www.honda.co.jp/parts/hamp/belt/tekiou01.html

carotman
08-25-2005, 07:50 PM
I found out that this belt is in fact a belt for the Metro/Firefly/Swift/Sprint.
I just checked the Napa Catalog and it seems that the SOHC 1990 suzuki swift (and clones) uses that belt.

So, in the worst case, you can go to the GM dealer and get that belt. There are GM dealers everywhere in the US :D

RobT5580
09-01-2005, 02:33 PM
I agree i got my stuff at napa thanks to carot and yasu.

hoppy
09-23-2005, 11:18 AM
The easiest thing to do is just bring the belt in and find one of a simmilar size and shape. I did that and am using a belt for a Hyundai Scoupe to run the altenator. How is the swap comming anyway? Did you get it to fit under the stock hood? I might be doing some development for new B20 mounts this winter, I got mine to fit in with no modificaitons in the prelude( i did use custom mounts).

Sean

b20a86lude
09-30-2005, 06:18 AM
wel see i didnt have the belt at all so no blet no ps no ac ano alternator only thing i got was the timing belt and i go tit in but ineed a rhd clutch cable and
the transmisson bracket and axles and alternator brackets

b20a86lude
02-17-2009, 04:55 PM
wow it wrked

carotman
02-18-2009, 08:18 AM
Good!

AccordB20A
02-18-2009, 01:18 PM
how many years did it take?? lol