Few install questions

[halxi]

Ok so im going to be installing my system here soon, i bought the following today:
Monster Car Audio basic hook up kit
Monster Car Audio interlink 201xln
Monster Car Audio MonsterBass XLN100

now, i have a directed d1200 mono amp, and my subs are dual 4 ohm, i need to wire in parallel correct?

which is power from the amp to the sub on one coil, then i hook up a wire on the other coil correct?

[superaccord]

here are some diagrams to hopefully help you out buddy.
http://caraudio.biggz.com/parallelseries.html

[89T]

is you'r amp 1 ohm stable, 2 ohm stable, or 4 ohm stable?
if you parallel each speaker you will net 2 ohms each.
if you then series them together it will net you 4 ohms mono.
if you parallel them it will net you 1 ohm mono.

note:Any thing under 4 ohm mono you need a min. 4 guage power wire from the batt to the amp. If not a second batt near the amp.
good luck, and i hope i helped.

[halxi]

i have 4guage from the batt to the amp, and i plan on installing an optima yellow top in my trunk later on.

Im almost positive my amp is 4ohm stable, so i guess i could wire in a series, if its 2ohm stable ill just go with the parallel

thanks for the help (both of you lol)

[89T]

Halxi ,the diagram superaccord posted only shows a single voice coil speaker..
with the duel voice coil you have to parallel both voice coils per speaker then series them together...if that makes sense.