PDA

View Full Version : Ouch


jigga89SEi
11-10-2005, 06:21 PM
So This is why My old engine died...
The 2 in front are my number 2 Rod bearings
http://www.imagestation.com/picture/sraid194/pdc11d0bee203a65949dedd3ffa0990a9/f1819ad5.jpg
http://www.imagestation.com/picture/sraid194/pbdb30b6f8ce4d423e8494a635b51bafa/f1819acb.jpg
And these are just random pics of my torn down Block, i've failed to haul this stuff into work yet...
http://www.imagestation.com/picture/sraid194/p4cc073e2f6c8e552fcc9c2f5f54bdfd1/f1819adb.jpg
http://www.imagestation.com/picture/sraid194/p45db8b94f592e5a312d33ff0870b7147/f1819ae4.jpg
NXRacer
11-10-2005, 06:32 PM
nice. I'd like to see what the inside of the motor out of my old coupe looks like. . . . .
gp02a0083
11-10-2005, 08:33 PM
dam thast worse than wwhen i spun my crank berings for my oldsmobile 350
jigga89SEi
11-11-2005, 04:21 AM
Well it was bad enough that I thought I had a rod knock.. But it was #2 piston hittin the head...
Cheeseburger
11-11-2005, 08:37 AM
dam!
frankie89
11-11-2005, 10:02 AM
did it bend any of the #2 valves..
jigga89SEi
11-11-2005, 03:58 PM
nope no bent valves... matter of fact there in great shape and I'll be reusing them in my NA motor
88Accord-DX
11-12-2005, 04:48 AM
Damn, pretty bad looking rod bearings. Re-bore the rods & use oversize bearings. I would line bore the block too. Good thing you can get that machine work for free. Machine work is expensive to have done.