PDA

View Full Version : front motor mount



franks89sir
08-18-2002, 07:46 PM
ok my front motor is out on myu car i am lossin so much power to the wheels it suks so has anyone replaced it them selves and how much do they run i called the dealer down hear and they want 60 bucks .... i ead in the manuall that basicly u jack the motor up with like a jack with a board on it and u losen it up sounds esay but is there anything else

AZmike
08-19-2002, 09:38 AM
I'm assuming that you're talking about the mount on the belt side of the engine. Yes, that's all you need to do. You might find that it's easier to work if you remove the two cruise control bolts and set it aside. I had my mount off when I did my timing belt a few weeks ago. Once the weight is off the mount, remove the three bolts and pull it out.

AZmike
08-19-2002, 10:10 PM
Oops, I need to read more carefully. You might be able to get a good deal on the front motor mount at a scrap yard. Just use the jack and piece of wood to remove the load from the mount and swap them out.