PDA

View Full Version : what kinda of oil pan gasket do we use?



newaccorddriver
01-07-2006, 09:54 PM
im pretty sure my oil pan gasket is going. i was wondering if we used the cork type gasket cause i can buy a roll and make my own for much cheaper...

newaccorddriver
01-07-2006, 10:27 PM
heh, im just making sure cause i originally thought my intake manifold gasket was going to be metal(like the one on the engine i rebuilt at school), but it looked like paper

3G Jester
01-07-2006, 10:44 PM
heh, im just making sure cause i originally thought my intake manifold gasket was going to be metal(like the one on the engine i rebuilt at school), but it looked like paper

:wtf:

Bglad420
01-07-2006, 10:48 PM
Oil pan gaskets are 1 peice molded rubber you wont be able to make it out of cork.......Why would the intake gasket be metal....they are always paper....were you working on a moped or something???? And why would you make a $10 gasket anyways.




Are you sure you should be trying to replace a oil pan gasket...its not as easy as you think.

AccordEpicenter
01-07-2006, 11:01 PM
i wouldnt use anything but a honda gasket. Ive been down this road, and had to do a job 2x when i didnt. Trust me

newaccorddriver
01-07-2006, 11:40 PM
i believe i was rebuilding a bonnevill or sometihng when i opened up the gasket kit and saw the metal gasket.

i was rebuilding a pontiac sunbird or something like that and the oil pan gasket was cork.


and yes, i know its not as easy as i think, but id rather do it myself as a learning expierence then pay someone else to do it

AccordEpicenter
01-08-2006, 07:04 PM
you can diy change the oil pan gasket but dont use anything but a honda gasket. Cork simply wont work

88Accord-DX
01-08-2006, 07:22 PM
Cork gaskets are on them old school motors; 289, 350, 440, 454, 427, etc. Some gaskets look like there cork type, but actually are corked base with a polyurethane type coating around it.
If you don't use a Honda gasket, at least use Fel-pro. Making one yourself is not worth it. Save yourself the head-ache & have peace of mind of quality shit installed the first time around.

Ichiban
01-08-2006, 10:03 PM
every V8 i've ever seen (lots) have had metal intake gaskets. in fact, the AMC 360 has a one piece metal intake gasket for both banks and a valley tray all in one.

....wow sorry its my birthday and i'm drunk....

88Accord-DX
03-19-2006, 12:44 AM
I'll tell you from rebuilding the motor, it needs a rubber type oil pan gasket.