Fuel filter washers???

[maxsideburn]

My Hayne's manual says that I need to replace the "washers" for the banjo bolts when I replace the fuel filter on my 87 EFI. Where can I get these? I can't find them on the autozone website or anyone else's.

[SteveDX89]

I've never replaced mine and never had a problem but if you want to do that, you'll have to get them at Honda.

[Xulfiqar]

just buy new aluminum crush washers from your local parts store - take your banjo with you for size

[Bglad420]

Just reuse them they wont leak...my havent two filter cahnges...my buddys teg doesnt either so I think you'll be OK!

[Mac]

Sometimes they come with the fuel filter. If not you can get them from Majestic Honda or any other Honda dealer.

[Kabuki]

Usually they come with the filter. Unless you buy crappy filters. The part number is 90428-PD6-003, and they list for $0.10 each.

[Honda-Master]

every filters i have ever used ,, mostly factory gaskets come with it ... and if not, i have reused those aluminum gaskets a few times, no problem,,

[Bglad420]

Come to think of it I did replace mine, they came with my filter from honda.....duh

[AccordEpicenter]

aftermarket washers are too hard anyway and wont seal. If the stock honda ones arent scored or overly crushed, reuse them

[DBMaster]

Every aftermarket filter I have bought has come with copper versions of those washers, but like the other posts have said, you should be able to reuse them at least once without a problem. I did that the very first time when I bought a filter from Honda. The car was still failry new and aftermarket filters were harder to find.