b series: clutch cable, accord or integra?

[Accordtheory]

I don't like the way the stock accord cable fits. Any of you guys get the cable from the 90-93 integra?

[SQ is the SQUAD]

it was either pos carb or carotman who did this a while back, i really cant rember

[Legend_master]

What don't you like about it? I thought mine turned out pretty well. The cable I will be changing out is the throttle cable. Mine is all angled wierd and shit, but it works for now.

[SQ is the SQUAD]

maybe it was the throttle cable they did

[Legend_master]

maybe it was the throttle cable they did


:dunno:

[SteveDX89]

The 90-93 Integra cable will work. It will pass behind the head on top of the intake manifold instead of looping around the front.

[Legend_master]

The 90-93 Integra cable will work. It will pass behind the head on top of the intake manifold instead of looping around the front.


I looped my factory clutch cable behind the intake manifold. It was jsut the perfect length to.

[SteveDX89]

I looped my factory clutch cable behind the intake manifold. It was jsut the perfect length to.

Pic? Mine is way long.

[Legend_master]

Pic? Mine is way long.


I don't really have a good picture of it, but it is the cable that runs behind the intake and in front of the Prop valve. I just ran it behind the IM and down to the tranny.

http://img.photobucket.com/albums/v667/Legend_Master/f0025749.jpg

[Hash_man_Se_i]

^^ ooh such a clean engine bay man.

So, the 90-93 teg clutch cable is shorter than the accord?

i'm doing a 5spd swap at the same time as my swap so I dont want to have to buy shit twice.

[Legend_master]

^^ ooh such a clean engine bay man.

So, the 90-93 teg clutch cable is shorter than the accord?

i'm doing a 5spd swap at the same time as my swap so I dont want to have to buy shit twice.


Either will work, Basically any honda clutch cable that is long enough will get the job done. The 90-93 integra should work well with the swap.

P.S. I have been cleaning the hell out of the engine bay with a brush, wrag, water, and b12.

[SteveDX89]

I don't really have a good picture of it, but it is the cable that runs behind the intake and in front of the Prop valve. I just ran it behind the IM and down to the tranny.

I see it. Looks like it kind of loops over close to where your black box was and then down. I routed mine the same way as factory. The teg cable would run across the top of the IM and down to the tranny in front of your intake.

[Accordtheory]

Ok, I'm getting the teg cable. I don't want to route the accord one over my turbo manifold, and I can't have any sharp bends in it at the firewall.. not with the stiff dual diaphragm pp I'm running.

[Accordtheory]

Well, I just bought one. Hopefully it will fit the firewall and connection to the pedal properly..