PDA

View Full Version : Dimensions?



ludesrv
02-06-2006, 03:46 PM
Does anyone have the dimensions to the 88 Accord 4 door LX engine bay. I just gotta know it for a work in process. I know you can get the dimensions if you are rebuilding the frame (collision body shops). I didn't know where to post this, I figured the technical forum would be the best. Thanks, I'm gonna go off and google the shit out of this haha.

88Accord-DX
02-06-2006, 03:50 PM
I'll measure mine tomm., & let you know.

ludesrv
02-06-2006, 04:34 PM
I need to know everything from front to back. Every hole. Honda makes spare holes in the frame to use as reference. Car needs to be resafetied and the measurements need to be within 2mms to pass.

ludesrv
02-06-2006, 05:54 PM
Alright, I taked to the guy. He wants the major dimension. where the struts towers are. where the frame start and ends. All around.

88Accord-DX
02-06-2006, 06:14 PM
Well, I was going to take a few measurements for you. I don't have time to measure every little thing. In the process of rebuilding my motor.

ludesrv
02-07-2006, 06:16 AM
If you could get the major dimensions for me it would be great. I have to wait 4 days (till friday) to get the governmen supplied ones, but I don't know if the guy can pull thru.

SteveDX89
02-07-2006, 09:29 AM
Does this help? Save it and blow it up if it's too small.

http://img51.imageshack.us/img51/903/2110613mt.th.jpg (http://img51.imageshack.us/my.php?image=2110613mt.jpg)

SteveDX89
02-07-2006, 09:32 AM
Sorry, that first one isn't too clear. Try this one.

http://img51.imageshack.us/img51/8608/211062ne.th.jpg (http://img51.imageshack.us/my.php?image=211062ne.jpg)