PDA

View Full Version : choke problems again..



DanG86LX
02-10-2006, 12:45 PM
The car was fine till this morning when it did not start.
Well, I pump gas as usual 3..4 times (cold here ~ -10*C), crank up ok, kind of started for 2..3 sec then dead. :wtf:
Removed the air box, and guess what, the choke flap 3/4 open! Tried to move the flap by pulling the linkage but the flap did not move! How could that be? Fortunate, I got a spare carb from junk yard, so I removed the top hat and I saw the culprit, a little screw which secure the choke lever to the flap shaft. It was loose on my car. To tighten it u have to remove the little rubber cover on the right side of the shaft.
I just wonder how many 3geez end up at junk yard bc of such a damn screw..

spnrx
02-10-2006, 12:50 PM
My car was having that exact problem. might you have any pics so I caould you know better understand?

A20A1
02-10-2006, 03:33 PM
It's the black rubber bit near the end of the screw driver
http://www.3geez.com/forum/attachment.php?attachmentid=3835

spnrx
02-12-2006, 01:05 PM
Thanks man!