Omg.. wife can't leave THINGS ALONE.

[Doward]

So yeah, wife decided to rearrange my shop area.

So now I need to know what size the screws are, for the air horn assembly on a Weber 32/36, as well as need to find the V looking guy that sits between the throttle bores, between the main housing and air horn.

Anyone have any spare weber parts? :(

[Doward]

Oh, and the linkage rod between the choke flaps, and the choke itself is missing :mad:

[lostforawhile]

pierce manifolds 1-800-874-3728 They can probably help you

[B16KILLA]

That sux dude wish i could help but all i got is extra FI parts.

[A20A1]

most are in mm, 2 or 4mm, and some 6mm perhaps. I don't have my old weber with me to check.

[Doward]

HAHA Luck is with me! Went out to the U-Pull-It, and found a mid 70's Mercury Bobcat - aka Ford Pinto! :D Stripped that Holley 5200 DOWN. Now I've got electric choke, as well ;)

I need to comb the archives... what air correctors/main jets/idle jets are you guys recommending for a TOTALLY stock 2.0L A20A1?

[A20A1]

so you have the weber or the holley reman?

I think the jets sizes will be different but you can look at the chart.

http://www.3geez.com/forum/showthread.php?t=4223

The stock is posted at the very top, it's pretty much the way the carb comes in the kit.

[Doward]

Holley reman... the weber jets work fine, Holley just had to be difficult and stamp their own numbers on it. It's basically a 32/36 DFAV :)

[A20A1]

http://www.3geez.com/forum/showthread.php?t=4223

I updated the thread on the first post.
I made a list of jets to buy if you're interested.