Hola 3geez dudes

[89AccordResto]

Cool site. I have a 1989 Honda Accord LX that's treated me well the past 5 years. She still runs perfect (excluding the A/C). Anyway, this summer I plan to revamp her a bit.... hence my SN. Going to redo the suspension (nothing fancy), bushings, etc, tighten things up, and put in a new stereo/speakers (nothing fancy). I found this site while looking for parts... I need a few things, and I hope somebody can tell me where to get them. I want all OEM parts if possible, I don't like aftermarket stuff much.

I need:

Steering wheel in GREAT condtion (mine has pits and chunks missing)
Horn buttons iwth horn logo still visible (3 of mine are almost solid black)
Shift Boot (mine's torn)
Mudflaps (one of mine is ripped, and they all look old. NOS would be great if possible)

Other than taht... I dunno. Maybe a new carb. I just replaced the exhaust, and I'll probably get it painted this summer too. :) She's a good car!

Oh, and whta about shifter bushings? My shifter is pretty sloppy. Does anybody have advice on stereos? I live in an area where people break into cars a lot, so I'd prefer a factory honda stereo.

Thanks dudes!

- James

[B16KILLA]

:wave: Welcome, if you need a steering wheel i have one to sell for cheap from an 89 with cruise control buttons.

[Deadhead]

You can get all of that stuff at the local junkyard and be just fine. Stuff like that is usually in decent shape. What side do you need the mudflap for? I think i've got one that is for the right side.

As for the sound system, if cars get broken into there... get an alarm first... Then get a decent system that you can remove the faceplate from.

[89AccordResto]

I just got an alarm for it last month. :) I'm hopign that an OEM looking CD player won't attract much attention.

[Feuerstoss]

Well, hmm. If you're going for suspension, I'm raving about the rear sway bar from an LXi I put in a couple days ago. Cost me $5 at the junkyard, took about two hours total to pull off and put in, completely bolt-on, and wow... the handling is vastly improved. Unless you were planning on doing aftermarket bars, that's something to start looking at.

[B16KILLA]

Heres the pix of the wheel that you pm'd me about:
http://img46.imageshack.us/img46/6122/dynomeet0308oh.th.jpg (http://img46.imageshack.us/my.php?image=dynomeet0308oh.jpg)
http://img46.imageshack.us/img46/6706/dynomeet0316xv.th.jpg (http://img46.imageshack.us/my.php?image=dynomeet0316xv.jpg)
http://img46.imageshack.us/img46/6565/dynomeet0324pl.th.jpg (http://img46.imageshack.us/my.php?image=dynomeet0324pl.jpg)

The wheel is in really good condition no cracks,pits,or fading.

[89AccordResto]

Cool. Can you take a close up pic of the wheel's surface near the top? Mine looks basically like that, it just has tiny pits all over it and I'd like to get one in almost new condition. Same for the shift knob and boot, if possible.

[AccordRacing21]

You can get all of that stuff at the local junkyard and be just fine.
:stupid:

[89AccordResto]

Well, hmm. If you're going for suspension, I'm raving about the rear sway bar from an LXi I put in a couple days ago. Cost me $5 at the junkyard, took about two hours total to pull off and put in, completely bolt-on, and wow... the handling is vastly improved. Unless you were planning on doing aftermarket bars, that's something to start looking at.

Cool! Thanks! Yeah, I'll probably do that also with poly bushings.

[89AccordResto]

:stupid:

Everything I've seen at junkyards has been pretty trashed, and sun bleached. I'd like some mudflaps that aren't all cracking up and dried out. Like, newish.

[Cheeseburger]

welcome dude!!!

[B16KILLA]

Cool. Can you take a close up pic of the wheel's surface near the top? Mine looks basically like that, it just has tiny pits all over it and I'd like to get one in almost new condition. Same for the shift knob and boot, if possible.

Ya i can do that i'll post more when i get home.

[B16KILLA]

Heres as close up as i can get with out my camera blurring up.Here you go heres the top
http://img157.imageshack.us/img157/1783/dynomeet0363rn.th.jpg (http://img157.imageshack.us/my.php?image=dynomeet0363rn.jpg)
Heres the bottom
http://img157.imageshack.us/img157/2555/dynomeet0378ie.th.jpg (http://img157.imageshack.us/my.php?image=dynomeet0378ie.jpg)

[A20A3quippedbeast]

Cool site. I have a 1989 Honda Accord LX that's treated me well the past 5 years. She still runs perfect (excluding the A/C). Anyway, this summer I plan to revamp her a bit.... hence my SN. Going to redo the suspension (nothing fancy), bushings, etc, tighten things up, and put in a new stereo/speakers (nothing fancy). I found this site while looking for parts... I need a few things, and I hope somebody can tell me where to get them. I want all OEM parts if possible, I don't like aftermarket stuff much.
I need:
Steering wheel in GREAT condtion (mine has pits and chunks missing)
Horn buttons iwth horn logo still visible (3 of mine are almost solid black)
Shift Boot (mine's torn)
Mudflaps (one of mine is ripped, and they all look old. NOS would be great if possible)
Other than taht... I dunno. Maybe a new carb. I just replaced the exhaust, and I'll probably get it painted this summer too. :) She's a good car!
Oh, and whta about shifter bushings? My shifter is pretty sloppy. Does anybody have advice on stereos? I live in an area where people break into cars a lot, so I'd prefer a factory honda stereo.
Thanks dudes!
- James


ahh sounds good man sounds like you're building a numbers-matching perfect condition 3rd gen accord. thatll go for about 50k at barrett jackson dude. haha. jk ive been doin that w/my 3rd gen also, but mainly doin rust repair and stuff like that...my car might get painted by next summer if im lucky.

good to have you on the board, btw

[mkymonkey]

dude why are you bringing up old threads? plus this guy is banned and i dont think anyone of us wants to remember him. and just an fyi...it was not good to have him on the board........trust me.

now stop reviving old threads!

[A20A3quippedbeast]

wtf? what are u talking about?

[mkymonkey]

uh...look under his name youll see the pretty little words "banned" if you want to know why...look up all his posts and that will tell you why. lol none of us liked him. well maybe one guy that kept defending him but thats it

[A20A3quippedbeast]

ahh ic the banned dealie....but i looked at his posts and didnt see anything "offending" at least not on the first page...what happened?

[MessyHonda]

most of the stuff got deleted..too tell you the truth i did not like the guy

[mkymonkey]

lets just let it rest and stop with the thread reviving seriously...ive said it like 10 times already to you lol

[frantik]

so you noticed he was banned but you replied to him anyways? ummmm :huh:

[A20A3quippedbeast]

nah after i replied, monkey told me he was banned. then i scrolled up and saw it