PDA

View Full Version : orderd parts today


Elijah
02-27-2006, 09:03 PM
Well I orderd my diamond pistons,eagle rods with arp rod bolts and arp head studs. Look out for 400+whp on track days
AccordRacing21
02-27-2006, 09:05 PM
Links to where you ordered this from? I want to do the same for my turbo set up.
Elijah
02-27-2006, 09:09 PM
I called diamond for the pistons and got the rods and head studs local from my budys shop.
Hash_man_Se_i
02-27-2006, 09:42 PM
oooh I can;t wait, I really need to see this beast.
A20A1
02-27-2006, 09:42 PM
Diamond and ARP have their own sites... as for eagle

--- ARP (http://www.arp-bolts.com/)
--- DIAMOND (http://diamondpistons.com/)


Here is what I collected for the Turbo FAQ that no one reads.



- RODS
--- EAGLE @ IMPORTPARTS.COM (http://www.importparts.com/)
* According to eagle the lowest priced place to get them is importparts.com
* This eagle Rod is a direct fit into the A20A engine. the only change required is to enlarge to a 21mm wrist pin from a 19mm wrist pin. Diamond pistons will accommodate this change here's the eagle part number
* Part Number - CRS5394a3d - Eagle rods

This is old info though, so any new updates in recent years, let me know so I can change the link and info.
gfrg88
02-27-2006, 09:56 PM
400+ whp on an a20?? that should be sweet :rockon:
Oldblueaccord
02-27-2006, 10:00 PM
I thought you got that stuff all thur Shawn last year? or is this a differant project.


Maybe you could get the pistons with a 19mm pin size so you dont have to resize the rods. Save some weight on the heavy end as well and maybe the cost would equal out.

wp
Elijah
02-28-2006, 05:46 PM
I thought you got that stuff all thur Shawn last year? or is this a differant project.
Maybe you could get the pistons with a 19mm pin size so you dont have to resize the rods. Save some weight on the heavy end as well and maybe the cost would equal out.
wp


Sean was a joke all I did was lose money through him. I sent money for some stuff but well thats another story.
newaccorddriver
02-28-2006, 07:16 PM
out of curiosity, are the pistons custom made, and if so, how much did it set you back?
Elijah
02-28-2006, 08:24 PM
out of curiosity, are the pistons custom made, and if so, how much did it set you back?


Yes the pistons where custom they where around 580us with shipping ect..
I know I will get hit with duty on arrival.
A20A1
02-28-2006, 08:38 PM
Didn't you get the turbo manifold from sean?
Elijah
02-28-2006, 08:41 PM
Didn't you get the turbo manifold from sean?

My old one sold it got a nice one now. That thing was headache to nothing fit ohwell I moved on to bigger and better now.
newaccorddriver
02-28-2006, 09:11 PM
Yes the pistons where custom they where around 580us with shipping ect..
I know I will get hit with duty on arrival.


whats so special about these pistons? higher/lower compression? just more durable and made for the HP?

i wish i could sink 5k into my motor rebuild... atleast i can dream:)
bobafett
03-01-2006, 01:53 PM
btw its www.diamondracing.net thats where he ordered the pistsons. :)

they are custom forged pistons setup with a 21mm wrist pin to fit with the LS rods. also they can be made with any CR that you want, so if you are building NA they can make them high CR, or u can go 8.46:1 like i did for a forced induction project. :) also diamond can hook it up with some BADASS 'power adder safe' rings. :)
Elijah
03-02-2006, 11:32 AM
btw its www.diamondracing.net thats where he ordered the pistsons. :)

they are custom forged pistons setup with a 21mm wrist pin to fit with the LS rods. also they can be made with any CR that you want, so if you are building NA they can make them high CR, or u can go 8.46:1 like i did for a forced induction project. :) also diamond can hook it up with some BADASS 'power adder safe' rings. :)

LOL Thanks Chris I used the same pistons as Chris I think we will both have some big power cars when done.
newaccorddriver
03-02-2006, 03:51 PM
wait until i get a chance to turbo my car. i wont even bother with custom stuff. just the basic stuff, and OBD1 for tuning:)

hey elijah, out of curiosity, do you have a spare head i can trial/test fit my D series distributor on? id use my own car for it, but summers coming soon and i cant afford to have much downtime on it
Elijah
03-02-2006, 04:57 PM
I will shortly I have a dead motor in my parts car I will be takeing the head off in acouple weeks mabey 3
NXRacer
03-02-2006, 05:16 PM
wait until i get a chance to turbo my car. i wont even bother with custom stuff. just the basic stuff, and OBD1 for tuning:)
hey elijah, out of curiosity, do you have a spare head i can trial/test fit my D series distributor on? id use my own car for it, but summers coming soon and i cant afford to have much downtime on it
um, if you're going to go turbo, there isnt much that ISNT going to be custom . . . just FYI
newaccorddriver
03-02-2006, 06:15 PM
um, if you're going to go turbo, there isnt much that ISNT going to be custom . . . just FYI


i meant the internals like the pistons and rods and such. i might consider a cam regrind when i go back home cause Colts just a 20 min or so drive away. asides from cam, theres not much i plan to do with the internals.
AccordEpicenter
03-02-2006, 08:51 PM
i think im gonna buy some pistons next
Elijah
03-02-2006, 10:53 PM
i think im gonna buy some pistons next

Mike over at diamond is a really cool guy I would talk to him if you are.
Elijah
03-02-2006, 10:54 PM
i meant the internals like the pistons and rods and such. i might consider a cam regrind when i go back home cause Colts just a 20 min or so drive away. asides from cam, theres not much i plan to do with the internals.


Cam is the last thing you should worry about IMO Im not even gonna touch mine.
bobafett
03-03-2006, 08:11 AM
Mike over at diamond is a really cool guy I would talk to him if you are.

yeah i worked with 'eric' and 'ron' i belive, they are both really helpful!
the guys at diamond pretty much rock!
Elijah
03-03-2006, 09:23 AM
yeah i worked with 'eric' and 'ron' i belive, they are both really helpful!
the guys at diamond pretty much rock!

I was even talking to a girl for a sec to they have really good staff over there.
Cheeseburger
03-03-2006, 10:20 AM
ur going to have a nice set up bro!1!
SQ is the SQUAD
03-03-2006, 04:03 PM
damn, i cant let you guy get too far ahead of me
AccordEpicenter
03-05-2006, 11:59 AM
you guys got their number? Did you guys go stock bore or oversize?
bobafett
03-05-2006, 12:02 PM
877-552-2112

i went .050 over
AccordEpicenter
03-05-2006, 12:06 PM
im debating wether i wanna just yank my head and oil pan in the turboaccord, deglaze and pop in new standard size forgings without going overbore. The engine runs great right now and i think the cylinders are pretty fresh... Weve done it before with good results but what do you guys think? My only fear is that they will get scuffed.