PDA

View Full Version : Question about putting rear discs on an 84



offthahook
03-23-2006, 12:46 PM
I tried to post a reply in the "how to" write up, but I got a message that said I couldn't. Anyway, it looks like the 2gen Lude had 2 motors available-- carb'd or Fuel Injected. Shows different part numbers and caliper manufacturers for each trim line/engine type. But does it really matter when doing the swap for the 2g Accord, or would I have to definitely get either the carb'd or FI engine rear disc setup? I'd prefer the closest "boltup" possible if I do it. If one works better than the other, bring it. 84-87 is the 2nd generation Prelude isn't it? Thanks.

PhydeauX
03-24-2006, 03:09 PM
It doesn't matter, they'll both bolt up. I believe they are the same for either.

OldTimer2gS
07-31-2007, 09:03 AM
I recently did the swap, and as the suspension on the 2g lude and the 2g accord are the same in the rear, it all bolts together just like the original drums did.