got my stuff to make my turbo manifold

[SQ is the SQUAD]

i like to give a very special thankyour to aaron weir of weirtech for hooking me up.

i am making a custom turbo log manifold for a 2g dsm t25 turbo.

i got a a20a exhaust flange, two 90 degree elbows and two t fittings. the pipe is 1.5 inch diamiator. its way bigger thant the ports on the head flange. everythnig is top quaility.i am going to have to cut the t's really short since the middle runners are so close


http://img228.imageshack.us/img228/6981/turbomani22tb.jpg

http://img71.imageshack.us/img71/3077/turbomani4os.jpg

[guaynabo89]

nice!

What material is it? Just steel with a coating?

[SQ is the SQUAD]

i belive one is stainless the other is mild, i dont rember what he told me and i really dont know my metals like that

[Hash_man_Se_i]

Are you making the manifold yourself?... that exhaust flange piece looks really nice.

[SQ is the SQUAD]

tchnicaly no since i am going to have to pay someone wo weld it for me. ill to all the mock up myself

[b8er]

dude, where did you get the materials, i have tons of access to a tig welder, bansaw, everthing, i could make a few of these or at leats one for myself. aha

[SQ is the SQUAD]

i brought them form aaron weir of weirtech, but he no longer makes them. i got his last a20a flange. if you go to www.homemadeturbo.com there is two other people selling them, i just dont rember there names

[b8er]

k cool. il check it out, whered you order the pippig from?

[SQ is the SQUAD]

i got everything form weirtech

[Vanilla Sky]

when i talked to aaron, he implied that he'll make ANYTHING at all if you sent him the specs. this was back when 2old_honda had his DCOE manifolds made.

[bobafett]

aaron is done, but he will send you to bmc, and they offer flanges and materials as well, but im not sure if they will build them for ya.

hey sq are those mc master elbows and t's? i have the same ones! gotta pick up a flange or two and turbo/wg flanges... :) good times!

[AccordEpicenter]

Aaron quit making flanges? My bmc racing flange was hella nice BUT they were real slow. That looks like its gonna be an interesting build!

[SQ is the SQUAD]

hopefully. i got this stuff to make a t25 log mani, it it works out i am gonna build a t3/t4 ram horn and upgrade

[A20A1]

Probably mild steel for the head flange and stainless for the pipes.

Do your spark plugs still see the light of day with that flange?

[SQ is the SQUAD]

^ dont understand what your saying but thats what i got

[b8er]

hes basicly asking if you will be able to still change your plugs when that mani's all done, does the flange have relefes for the plugs to fit or no?

[A20A1]

Yeah it looks like the holes for the plugs will be covered... you need room for the spark plug removal socket.

[SQ is the SQUAD]

i dont think ill have a problem

http://img233.imageshack.us/img233/9136/flangeon4ws.jpg

[SQ is the SQUAD]

b8er, are you making a manifold for the itbs, cuz if you do, i may need one.