B20 Guy's got one for you

[TWOLOUDNPROUD]

You Know to use the B20A5 flywheel you half to grind out the Trany Well i did not want to do that so i made a guess and i took the flywheel to the machine shop and had them take 2 thousands off the front and 60 thousands off the back and 60 thousands off the where the flywheel set's on the cranck by doing that it work's Perfect No Grinding Needed:cheers: Sorry guy's i did not get a chance to take some pic's of it .I had to get the B20a in A.S.A.P since i blow the Hell out of the trany on my A20A:rant: .So i hope this helps B20A swap's in the future it cost me $75.00 to get it done and saved my trany fron the grind.

bump

[HostileJava]

Please don't bump a thread 17 minutes after you post it.

[mykwikcoupe]

pics yo. Kinda fuzzy on which areas your referring to. i didnt get a flywheel with either of my engines even thoguh the importer said they were complete. Im looking at the fidanza unit right now but id prefer a stocker for the torque. gots an extra unit you wanna send myu way. maybe a stocker carnk pulley

[carotman]

Well, I ran into starter problems with the B20A5 flywheel, I had to make a spacer for it. I will eventually grind the gears out of the starter and remove the spacer.