PDA

View Full Version : Intake mani help


TJX
05-30-2006, 05:52 PM
http://i65.photobucket.com/albums/h210/tjxs/egr.jpg
I'm having a little problem installing this gude intake mani. The egr port is different on it. Any ideas what to do? So far the only thing I can think of is JB welding it.
B16KILLA
05-30-2006, 07:40 PM
I've beeen thinking about the same thing for about a week. I dont have any ideas besides to fabricate some kinda of adapter.
Kabuki
05-30-2006, 09:36 PM
Tap it and install an oil pan drain plug.
AccordEpicenter
05-31-2006, 07:46 PM
jb weld that beeeoootch
carotman
05-31-2006, 09:37 PM
Kabuki has a good Idea.
Kabuki
06-01-2006, 10:53 AM
Oh, well in that case, the threads for standard Honda drain plugs (84 and later) are 14mm x 1.5 threads per mm.
kraftaroni
06-28-2006, 09:26 AM
That's not an EGR port it's an air pump port, I believe. That manifold on the left is from a b20 accord jdm motor. I just cut mine off and welded it shut.