Gauge trim diameters?

[maxsideburn]

Does anyone know the diameters of the gauges in a 3G? I want to install some chrome trim rings around my gauges, but I'm not certain as to what diameter they are and I don't feel like yanking it all apart to find out. So if anyone has a cluster laying around can you please post the results here, then we can all know if we want to make some trim rings? Thanks.

[2drSE-i]

wow seriously dude, search. there was a thread not that long ago about the ring mod....

[2drSE-i]

5 mins of searching and look what i found

http://www.3geez.com/forum/showthread.php?t=47038&highlight=guage

i searched guage bezel and in no time it popped up

the rings from it were for a 4th gen accord that he cut and reshaped to fit.

[L3G10N]

no need to cut and reshape the ring. Just oversize the center one of 1.5mm. The 2 others will fit there without mods.

[maxsideburn]

well actually I was going to use some different rings, that's why i was asking for diameters.

[L3G10N]

outers are 90mm and middle look to be 103 or 104mm. Mine is 105 and i need to remove from the bezel 1mm and some dust.

[maxsideburn]

so those are actual measurements taken from a cluster? or just a guess? I need to know exactly and don't have any cluster to measure other than the one that's installed in my dash right now, lol.

[L3G10N]

so those are actual measurements taken from a cluster? or just a guess? I need to know exactly and don't have any cluster to measure other than the one that's installed in my dash right now, lol.

For the outer one, it's the REAL measurement taken from my own ring.
As for the center one, my ring is 105mm and it's a little too large. So, 103mm should be perfect.

++edit++

just took measure from the bezel itself and look to be 102mm for the center one.

[maxsideburn]

ok, thanks.