View Full Version : Upper Control Arm Help
dalinxz
06-26-2006, 10:12 AM
http://cgi.ebay.ca/Upper-CONTROL-ARM-ACCORD-86-89-BUSHINGS-BALL-JOINT-L_W0QQitemZ8077204705QQihZ019QQcategoryZ33580QQssP ageNameZWDVWQQrdZ1QQcmdZViewItem#ebayphotohosting
Does anyone know how hard it would be to put this together?
AZmike
06-26-2006, 10:56 AM
Using Honda parts it is easy. As long as everything in their kit is sized properly it shouldn't be bad at all.
dalinxz
06-26-2006, 11:30 AM
i mean will i need any special tools or is it just in and tighten or will i need a press and some other specialty tools.
AZmike
06-26-2006, 01:33 PM
No special tools are required.
dalinxz
06-26-2006, 03:53 PM
so it doesnt need to be pressed right.
2dsei
06-26-2006, 04:01 PM
i changed mine out and it took like ten min nothing should need to be pressed i installed adjustable one but the factory ones should be easyer to intall
ottomatic
06-27-2006, 11:38 AM
be sure to grease (real well) the area inside the control arm before you install the bushing. should slide right in.
dalinxz
06-27-2006, 04:32 PM
thanks alot guys, now im just waiting to see whether another user on the board will sell me his and im set. Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.