PDA

View Full Version : turbo manifold idea



87ludesi
09-08-2006, 12:22 PM
I've been looking around the forums for awhile now, cuz i wann go turbo with my prelude (2.0 SI A20a3). Anyway...has anyone ever tried to use a manifold from a different engine (like f22) and cut it where the header flange is...like an inch away and then weld one for an a20 onto it. of course you would have to use a little tubing, cuz the ports don't match. anyway, i was just seeing if that's even possible, or if anyone has even tried. i don't know what manifold would be close enough to try it with.

AccordEpicenter
09-08-2006, 01:00 PM
no dont even think about it just make your own custom one. There are 100 threads about trying this all you need to do is search

MessyHonda
09-08-2006, 03:19 PM
yeah some one on here from f22parts was thinking about making manifolds for us....i havent heard or seen his on the board lately.

ghettogeddy
09-08-2006, 03:21 PM
there isent a single header on the market for honda that comesclose to the a20 header

or are u talking about cutting the flange and putting the stock one back on caus ehtat might work

gfrg88
09-08-2006, 03:22 PM
there isent a single header on the market for honda that comesclose to the a20 header

or are u talking about cutting the flange and putting the stock one back on caus ehtat might work

yes there is.

bobafett
09-08-2006, 03:23 PM
rofl. :)

A20A1
09-08-2006, 03:33 PM
rofl. :)

I second that.


anyways you might as well make a custom manifold, because you'd what to place the turbo flange specific for your turbo. Mc Mastercarr has all the parts you need, well maybe not the turbo flange and A20 flange, but the tubes it has. If you just lop off the F series flange and weld on the A20 there will be some allignment issues with the outer ports... the inner ports are fine.
And you may have a turbo flange too low or too high or not at the right angle or the bolt spacing is wrong.

There are close f series headers that fit... small mods to the A pipe and the outer primaries and port shapes will give you a usable header.

87ludesi
09-08-2006, 04:28 PM
Thanks guys. i read all the how to's on making your own manifold, but i didn't really like any of the ideas in there. i saw some of your guy's manifolds and it doesn't look that hard, i'm just not sure where to get the pipe. i read it somewhere when i was looking through posts for hours, but i read so many i don't remember where....i'll search again.

A20A1
09-08-2006, 04:30 PM
mc mastercarr

bobafett
09-08-2006, 05:30 PM
http://mcmaster.com/

87ludesi
09-08-2006, 09:01 PM
thanks...very helpful. 3geez has a lot more info on turbo a20's, and the motor in general than preludepower.

mkymonkey
09-09-2006, 07:49 AM
cuz we rule thats why......and how dare you even think of comaparing us to preludepower!.......bastard











anyway gl :D

AccordEpicenter
09-10-2006, 07:10 AM
lol preludepower. Reminds me of honda-tech, and this site is 1000x better than JDM Ricer-tech