Venyix
09-10-2006, 09:38 PM
So recently I went from driving this...
http://i110.photobucket.com/albums/n93/venyix/DSCN1523.jpg
To driving this...
http://i110.photobucket.com/albums/n93/venyix/DSCN1512.jpg
http://i110.photobucket.com/albums/n93/venyix/DSCN1514.jpg
http://i110.photobucket.com/albums/n93/venyix/DSCN1522.jpg
http://i110.photobucket.com/albums/n93/venyix/DSCN1515.jpg
The car is nice but still needs to be cleaned up...and this definitely needs to be taken off..
http://i110.photobucket.com/albums/n93/venyix/DSCN1516.jpg
So anyway...at first the car hasn't been driven in some time..after I drove it about a week I had to replace every hose, simply because everyone kept splitting wide open...so now that this problem is resolved...I have run into another one..the idle is really rough..it will sit at 800 when warm...but if it's not warm...def. will not idle..I replaced wires plugs dizz cap..my friend is going to try to time it..(rotatin the diz) and see if this helps any...but the car sounds like it's missing at <3000rpms after these RPMs it runs pretty smooth...so I'm at sort of a loss..
http://i110.photobucket.com/albums/n93/venyix/DSCN1523.jpg
To driving this...
http://i110.photobucket.com/albums/n93/venyix/DSCN1512.jpg
http://i110.photobucket.com/albums/n93/venyix/DSCN1514.jpg
http://i110.photobucket.com/albums/n93/venyix/DSCN1522.jpg
http://i110.photobucket.com/albums/n93/venyix/DSCN1515.jpg
The car is nice but still needs to be cleaned up...and this definitely needs to be taken off..
http://i110.photobucket.com/albums/n93/venyix/DSCN1516.jpg
So anyway...at first the car hasn't been driven in some time..after I drove it about a week I had to replace every hose, simply because everyone kept splitting wide open...so now that this problem is resolved...I have run into another one..the idle is really rough..it will sit at 800 when warm...but if it's not warm...def. will not idle..I replaced wires plugs dizz cap..my friend is going to try to time it..(rotatin the diz) and see if this helps any...but the car sounds like it's missing at <3000rpms after these RPMs it runs pretty smooth...so I'm at sort of a loss..