PDA

View Full Version : E-Brake Handle Replacement


Listen2myBASS
09-11-2006, 01:42 PM
ive searched and came up with nothing so here it is. how do i remove my old e-brake handle?
DBMaster
09-12-2006, 06:12 AM
Are you talking about the actual handle (the metal inner part), or the outside, interior colored, covering?
Listen2myBASS
09-12-2006, 12:34 PM
the covering, the vinyl crap...
MessyHonda
09-12-2006, 12:39 PM
the covering, the vinyl crap...

its easy...pull the back side out and then push it foward. should come out....i took mine out to paint it and it looks pimp in black
DBMaster
09-12-2006, 01:57 PM
Yeah, pretty much what Messy says. I found it easier to remove the screws holding down the back part of the console (the part around the e-brake handle) and pull it off. There are a couple of "snaps" on the back part of the handle cover that hold it to the metal part. Mine had some glue on those as well. Once you pull those out the thing slides off.

I replaced mine with a new OEM cover after having an aftermarket aluminum one on for a year or so.