Euro Honda stuff

[denhonda]

Check out this site for Honda bits & pieces. Not just 2g either. http://www.autoteile-blinker.de/(292).html

[snoopyloopy]

hmm....so a edm front-end conversion is with in our reach.

[ghettogeddy]

i dident see any 3rd gen stuff i did see a 89 but its 4th gen

[snoopyloopy]

3g stuff here: http://www.autoteile-blinker.de/Honda_ACCORD_1.6_bis_2.0_bis_2.0_16V_12.(292_300). html
unless the ca4 chassis isn't 3g

[MessyHonda]

well the only thing that is cool is the tail lights but they dont sell the center part

[ghettogeddy]

i couldent see the year on the little side bar

[A18A]

hehe i saw my headlight there, but i need 1 with a fog light in it :(

but the fixed headlight conversion is un-doable unless you modify the frame :(

i want these corners!!!
http://www.autoteile-blinker.de/images/artikel/4044322.jpg

[snoopyloopy]

so wait, the fender won't bolt on the usdm chassis?

[forrest89sei]

to convert a flip up 3gee to a Fixed Headlight 3gee you need to swap the Rad support.

2ndgenguy needs these:

http://www.autoteile-blinker.de/images/artikel/4044332.jpg
http://www.autoteile-blinker.de/images/artikel/4044252.jpg

[A18A]

the frames are different http://i34.photobucket.com/albums/d106/89accord/b4bb7521.jpg everything else (hoods fenders bumpers etc..) they all bolt up w/o mods

[snoopyloopy]

yeah, that's what i was talking about. in theory, i could just order a hood, fenders, etc. from this company then bolt it on or no? i know you would need a new upper rad support as well. but the chassis looks the same where it counts. it looks like only the light buckets are different, with the edm one being more open to have room for all the wiring and stuff whereas the usdm one just has the pop-up arm hole.

[A18A]

yea everything will bolt on, im not 100% sure on the corners though, but i know that will need the frame to be modded

[2ndGenGuy]

Man, if I knew about that damn site sooner! Actually I'd prefer the JDM sidemarkers. They're similar to the 3g JDM sidemarkers because they're smoked, and have the little nub sticking out in the middle. Wohdog is the man though, and he is hooking me up with the parts from New Zealand.

Though those bumper lenses are interesting. I bet theres a different housing for the light that goes behind that. I'm also looking to get the headlight wipers for my car... but too bad that site doesn't have them...

Oh sweet and they've got 1g parts!!! I think that offthahook is looking for some of those particular parts too! And Isma as well!

Great find though man! Definitely going in my bookmarks!

[carotman]

hehe i saw my headlight there, but i need 1 with a fog light in it :(

but the fixed headlight conversion is un-doable unless you modify the frame :(

i want these corners!!!
http://www.autoteile-blinker.de/images/artikel/4044322.jpg

These coreners are uglier than the ones you currently have. Teh JDM ones are better IMO.

[DDRaptor]

It's in german, and it's organized in a weird way. i'll figure it out.:huh:

[lostforawhile]

Man, if I knew about that damn site sooner! Actually I'd prefer the JDM sidemarkers. They're similar to the 3g JDM sidemarkers because they're smoked, and have the little nub sticking out in the middle. Wohdog is the man though, and he is hooking me up with the parts from New Zealand.

Though those bumper lenses are interesting. I bet theres a different housing for the light that goes behind that. I'm also looking to get the headlight wipers for my car... but too bad that site doesn't have them...

Oh sweet and they've got 1g parts!!! I think that offthahook is looking for some of those particular parts too! And Isma as well!

Great find though man! Definitely going in my bookmarks!i just clicked on these links and they still work. the light with the euro parking lamp,will fit right in to the cars with solid amber turn signals. i have a set on my hatch. you have to splice the turn signal wire into your plug,but no big deal. the parking lamp just needs a 12 source of your choice. if you can't get the housing, it would be very easy to partition off a standard turnsignal housing and add a small extra bulb. thats all it really is,the cover will fit right over the usdm housing. another use for leds possibly. has anyone ever figured this out? do they have sidemarkers for the 3 g? the links work but i can't read the writing.

[SZfiftyfour]

http://babelfish.altavista.com/
if you go here and put the sites addy into the translation box it will translate the page while the site works. as in : you can click links on the site and the next page is translated also. up until the ordering part of course, you'll have to use the original site for that.

[tnoz]

to convert a flip up 3gee to a Fixed Headlight 3gee you need to swap the Rad support.

2ndgenguy needs these:

http://www.autoteile-blinker.de/images/artikel/4044332.jpg
http://www.autoteile-blinker.de/images/artikel/4044252.jpg

where can i get those sidelamps? i have the bad ass looking dummy lenses on my accord

[coope]

i can't read it give me a translated page

[SZfiftyfour]

taken from translated site

Supply and forwarding expenses

Note!

For headlights with electrical LWR always stands a note such as El. or electrical.
If not then the headlight is only for manual LWR! Even with newer car models!

Forwarding expenses (during collection forwarding expenses are void!)

Dispatch takes place only within Germany
Forwarding expenses are computed only for the largest part!
Forwarding expenses for the remaining parts are then in the price with contained!

Small articles:
Headlight, tail lamps, turn signals, mirrors, radiators, fog headlights, radiator grilles and all
other parts than package to be dispatched, all the same which number: 17.50 euro altogether

Dispatch with the post office AG/DHL as insured package
Example: 2xScheinwerfer, 1xSpiegel, 1xKuehler, 1xGrill
We compute altogether only 17.50 EURO


Majorities:
Bumpers, fender, side panels, front linings,
Bumper reinforcement and all other large plates: 40.00 euro altogether

Dispatch with the Post/DHL or forwarding business as a versicherte transmission (bulky goods)
Example: 2xKotfluegel, 1x bumper, 1xFrontblech, 2xBlinker
We compute altogether only 40.00 EURO

Bulky goods:
Hoods, rear flap and doors: 75.00 euro altogether

Dispatch takes place with a forwarding business
Example: 1xMotorhaube, 2xKotfluegel, 1x bumper, 2xScheinwerfer
We compute altogether only 75.00 euro

Starting from a purchase order value of over 1000 euro no forwarding expenses result
Supply of the parts approx.. 2-5 working-days after order entrance
We exclusively supply against vorkasse, surname, and/or cash payment during collection!!

Internationally:
No dispatch


Well that sucks.