View Full Version : Need Some Distributor HELP
TWOLOUDNPROUD
09-25-2006, 06:47 PM
Here the question can i use a ODB2 1996-2000 Acura Integra distributor on a ODB0 Ecu?
TWOLOUDNPROUD
09-25-2006, 07:08 PM
bump
B16KILLA
09-25-2006, 07:20 PM
it might work but the plugs on the distributor are different.
TWOLOUDNPROUD
09-25-2006, 08:50 PM
it might work but the plugs on the distributor are different.
yes i know that but what need to know is wil it work with my OBD 0 ecu
TWOLOUDNPROUD
09-25-2006, 11:13 PM
:rant: :rant: :rant: :rant:http://www.boardtracker.com/images/dog_hourglass_small.gif:rant: :rant: :rant: :rant:
carotman
09-26-2006, 03:36 AM
No it won't work with an obd0 ecu
TWOLOUDNPROUD
09-26-2006, 08:25 AM
No it won't work with an obd0 ecu
That what i needed a straight answer Thank you Carotman:rockon:
thegreatdane
09-26-2006, 10:47 AM
It will work with OBD1 though. just thought I would add that.
AccordEpicenter
09-26-2006, 04:22 PM
true but the reason it wont work with the obd0 ecu is because the wheel for crank angle sensor have a different number of teeth on them
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.