High-performance Camber Kits

[Pico]

Any one have any experience with this type of kit or seen these.
I thinking about prelude arms but these might be another option.
Opinions Anyone.:D
http://www.jcwhitney.com/autoparts/Product/tf-VehicleBrowse/s-10101/Pr-p_Product.CATENTRY_ID:2009551/showCustom-1/p-2009551/N-111+1989+200728704+600003418/c-10101

[mkymonkey]

oops...sorry wrong thread

[ZackieDarko]

is this only for the 88-89 LX-i/SE-i hubs or for all years and trim levels?

[Pico]

The arms are the same from 86-89 according to my catalogs here at work so they should fit

[Oldblueaccord]

http://www.3geez.com/forum/showthread.php?t=48440

rears:


I dont know if those arms in the picture will work. they look like integra arms to me.

EDIT:

http://www.3geez.com/forum/showthread.php?t=49055

fronts:

Heres something new on rockauto I never seen

http://info.rockauto.com/Moog/Detail.html?K90141_TOP.jpg

http://info.rockauto.com/BeckArnley/Detail.html?1014421.jpg

One more edit:

I have this kit here it gives me about -2 both wheels I am not lowered

http://www.specprod.com/PROD_DIR/PROD_PASSCAR.HTML


wp

[Oldblueaccord]

Adding in a picture of my homemade steel bushings and the camber kit.

http://www1.snapfish.com/slideshow/AlbumID=143182445/PictureID=2672517261/a=85267970_85267970/t_=85267970




wp

[EX-ileAccord]

Moog makes a front kiit, I have the part# around here some where.........

[frantik]

hey pico did you end up getting this kit? i need to get one.. or maybe just get some lude arms i guess

[Pico]

No I didnt , but I need to get something sooner or later

[frantik]

if you get prelude arms you dont need a kit right?

[MessyHonda]

if you get prelude arms you dont need a kit right?



thats the point....the lude arms have 2 adjusting bolts and you can aline the camber with it. i have a set of lude arms but the front camber is not as bad as the rear.

[frantik]

wanna sell me em :deal:

[ZackieDarko]

so lude arms will compensate for a 2.25" drop? so i will only need to get an alignment kit for teh rears?

[Cheeseburger]

dam and i just bought the front :( but 100 bucks aint bad at all. ill look into these in the summer

[tommi-fi]

Any pics on those lude arms?

[AccordEpicenter]

so will these make your car faster over the regular camber kits?

[Pico]

so will these make your car faster over the regular camber kits?
an extra 5hp if installed correctly :lol:

[frantik]

5hp EACH SIDE :rockon: :rockon:

[MessyHonda]

sweet now i can toss my LSD mods for these

[Trollet_]

i lowered my accord 87 EX 40/40 with a H&R spring kit, and the camber became / \ , i saw a prelude at the junk-yard, from around 85 ore 86, does anyone know if the arms fits om my accord ? :)

[88LXi68]

i lowered my accord 87 EX 40/40 with a H&R spring kit, and the camber became / \ , i saw a prelude at the junk-yard, from around 85 ore 86, does anyone know if the arms fits om my accord ? :)

85-87 prelude arms fit.

[Trollet_]

i got the arms from the prelude, i dont if it was 85-87, but i think so. (1800ccm dual carb), but it does'nt fit, the distance between the bolt's to mount it in the chassis are 14,5 cm, on the accord there are around 15,5 cm!!
the one i got the arm's from looket like this:

http://www.honda-prelude.org/gallery/pic/1985/honda_prelude_516276.jpg

[LX-incredible]

That's what fender washers are for.:)

[frantik]

i got the arms from the prelude, i dont if it was 85-87, but i think so. (1800ccm dual carb), but it does'nt fit, the distance between the bolt's to mount it in the chassis are 14,5 cm, on the accord there are around 15,5 cm!!
the one i got the arm's from looket like this:

http://www.honda-prelude.org/gallery/pic/1985/honda_prelude_516276.jpg

you gotta read the FAQ.. you have to use parts of the Accord control arm and some washers as shims

[Trollet_]

ait:) i'll try :)