PDA

View Full Version : A20 headgasket pic



POS carb
09-01-2002, 12:11 AM
for whoever needs it, I found it in my webspace..

http://server2047.virtualave.net/kromeco/01-Oct20/MVC-021F.JPG

2Fast_Fiero
09-01-2002, 12:28 AM
Whoever needs the pic? or the headgasket?
Cus I'll gladly take that head gasket off your hands for ya :D, thats the problem with my accord, blew the head gasket, so I gotta drain all the fluids out of the car and put new oil and af back in it, with a new head gasket, and thermostat, PRAY my head isn't warped!

doug
09-01-2002, 05:31 AM
actually this photo can help me figure out something. I'm currently getting a small film of oil on the lower left (passenger)
side of the head/block...were that small lip is and I'm trying to decide if it is the head gasket or maybe an o-ring for the distributor that is leaking. It is not a large amount of leakage, but it is continuous since if I wipe that little lip dry it is wet next time I check it. SO, anywho, looking at that head gasket photo is that gasket sitting as it would on the head? If so are are the small holes at 25, 35, and 43 (as like minutes on a clock) oil feed holes that could possibly spring a leak?

POS carb
09-01-2002, 08:09 PM
http://server2047.virtualave.net/kromeco/01-Oct15/MVC-032F.JPG

2Fast_Fiero
09-01-2002, 09:43 PM
Eric, I thought you was moving to Miami? If so why in the hell do you have your engine torn apart?

YK86
09-01-2002, 11:25 PM
Those pics are quite old (maybe 1/2 to 1 year ago???). His car's running right now.

A20A1
09-01-2002, 11:37 PM
I didn't give the ol thubs up after swapping the head and gaskets but I did go inside and zonk out on the couch.

2Fast_Fiero
09-02-2002, 01:14 AM
Ohh ok. I was about to say, I just saw his car at the SoCal meet, You punk ass just has to move to Miami, thats further then hell now, I was gonna drive up to SoCal and chill with you guys in a few months, and you was one of the dudes I wanted to chill with, but your gonna be all far now.

89NinjaAccordLX
09-03-2002, 10:42 PM
I printed out the picture and cut out the gasket. It fits perfectly where my old head gasket went. Guess I dont have to buy one from honda now...

A20A1
09-04-2002, 08:53 PM
haha...

if you print out 14 more copies you can lower the compression and run a turbo. swisshhh

accord_lx_86
10-30-2002, 04:43 AM
lol...paper head gasket...haha

dXsquared
10-30-2002, 12:51 PM
someone try it!!!

Travis