LiTtLe xOx BitT
11-05-2006, 03:29 PM
Tools needed:
10mm socket
phillips head screwdriver
All you need to do is take off the plastic covers on each side of the sunroof on the inside of the car using the screwdriver. Once you have them off you need to take off the 8 10mm nuts holding in the glass. once those bolts are out you can push the glass out the top of the car. there are shims between the bracket and the glass that you need to put back in when you put in the new glass. Put the new glass in through the top and allign it with the brackets. Then install the shims and put on the 8 nuts and tighten them down. After everything is tight pour water on the top and make sure there ae no leaks, if there are any leaks just add shims on the side it is leaking from. Once there is no leaking you can install the plastic covers over the nuts and then your done. I will update with pics when i can.
10mm socket
phillips head screwdriver
All you need to do is take off the plastic covers on each side of the sunroof on the inside of the car using the screwdriver. Once you have them off you need to take off the 8 10mm nuts holding in the glass. once those bolts are out you can push the glass out the top of the car. there are shims between the bracket and the glass that you need to put back in when you put in the new glass. Put the new glass in through the top and allign it with the brackets. Then install the shims and put on the 8 nuts and tighten them down. After everything is tight pour water on the top and make sure there ae no leaks, if there are any leaks just add shims on the side it is leaking from. Once there is no leaking you can install the plastic covers over the nuts and then your done. I will update with pics when i can.