This bodykit : I 'm excited! '

[gr3k0sLaV]

It's a 94 Accord bodykit though, but man it looks sweet, im considering seriously looking into purchasing it...I love it!!!

Cant see why it wouldn't fit with a little custom work

http://home.iprimus.com.au/cmwmjt/fb.jpg
http://home.iprimus.com.au/cmwmjt/gril.jpg
http://home.iprimus.com.au/cmwmjt/rb2.jpg
http://home.iprimus.com.au/cmwmjt/rb.jpg
http://home.iprimus.com.au/cmwmjt/ss1.jpg
http://home.iprimus.com.au/cmwmjt/ss2.jpg
http://home.iprimus.com.au/cmwmjt/wing2.jpg
http://home.iprimus.com.au/cmwmjt/wing.jpg

[toastyghost]

A *ahem* LITTLE custom work? Seriously though it looks dope, hope it goes well. Personally if I were going to spend the dough for a real kit, I would get one that I knew would work. But good luck with the project!

[Chubs87Accord]

that does look sweet... whered you find that?

[gr3k0sLaV]

An australian company makes it, i dont know if its their own creation or made by someone else, Im waiting on the reply on costs and who makes it, and measurements.

[gr3k0sLaV]

$1500 AU for the bodykit which is roughly $750 US , now im dying to figure out if it will fit

[gr3k0sLaV]

Anybody want to give me some info on what the chances of it are fitting?

ANyway ill be heading up to melb to get it measured.

[Neuspeed87lx]

i know someone that has a kit from a 93 accord and it looks sooooo awesome on his 3g ....he had to do some work to get it to fit though

[shepherd79]

chris don't do it. you will spend to much money on fitting this thing. it is not worth it. see if you can find 90-91 integra body kit. they are very close. i think they are like 1 inch off.

[2Fast_Fiero]

Yes it will work, if you can cut a few things off of the body kit, it will work just fine, I just tried to fit a 94 accord rear and front bumper on my car, the front bumper fit perfectly, but looked weird as it was round and my car wasn't, and the rear bumper would fit as long as these two edges by the lights could have been cut off, but I couldn't do that because it was my mom's friends car, she lemme play around HEHE, but yes it will work and it wont be a bitch, I don't know where you came up with that, but the Integra body kit will work also, along with the prelude body kit. And I would like to know how that guy got that 4th gen accord body kit to work on our car, the front bumper is to short.

[YK86]

You make it sound simple but cutting kits and bumpers to make it fit is not easy especially on urethane stuff. I can see fibreglass being easier to work with. Even filling the cracks on the CRX lip and reinforcing the back to keep it from breaking apart takes quite abit of time and patience. You will have to be very smart about where you cut/paste and how you fill everything especially on a front bumper where highway speeds can make the bumper flex quite a bit.

[gr3k0sLaV]

the kit is fibreglass

[2Fast_Fiero]

Well yea, He should know that he must be carefull about what he does, but if him or anyone around him is talented in that feild, it could be very easy, but also time consuming, it can be done, but I belive that were all trying to find a nice looking body kit with less mods, and maybe some of us want the best mods so they can have some sort of feeling knowing that they created a masterpiece, there is very high risks in doing this kind of stuff, I do sugjest a body shop custom install this kit for you, I would rather do it myself and have my own name in it, but thats just me, I work with that kinds of stuff all the time just for the hell of it, if its around for me to play with. but do know that by buying that kit you are going to have to take risks in order to get it to fit your 3G. There's a few area's you will need to cut like where the lights go on the bumper, you'll notice that, I belive there are some other areas, and the mounting holes might not be in the right spot, so you might have to figure out a way to mount it properly.

[Lockleaf]

msi you said something about a prelude kit fitting without much effort. which one? I found a company that produces a pretty cool kit for the 89 lude's that is nothing like any kit for our cars. i thought they might fit best with some work especially on a coupe. tell me if i'm full of it or not and i'll find the advertisment and try to post it. later. lockleaf.

[2Fast_Fiero]

Well, I don't know about the side mounts, but the front mounts will work, I know that I got my dad's 88 Lude Si's front and rear bumper to fit, and exactly like I said the lude is about an inch wider then our car, so either you can find a way to make it work right on the sides, or put some fender flares on your car to make a wide body, its about an inch wider then our car, so thats half an inch on each side

[down2earth]

sup people listen up its doable n been done but not with that one heres the deal on my 89 accord i first put a 95 accord stock bumper, then the wings west kit onlye reason is since its polyurethane its easier to bend n such n now i have a 95 accord lower lip they fit easy not that much work but wiht fiberglass its alot or cutting n molding n such but liek i said doable n great.

[jteuton]

can somebody translate this?

[JSid7]

do you guys think the front bumber from a 97 and ^ prelude would work

[flamed89]

that looks like a VIS xtreme? get one for a 90-93 its easier to make fit

[Eric89Carb.]

i would like to see some picks on that.:)