L.E.D. 3rd Brakelight.

[BITESIZE]

Here ya go! :rockon:


HOLLY POOP STAIN, THESE 5MM RED DIFFUSED LEDS ARE BRIGHT!:welcome:

2 ROWS OF 13 LED'S SO 26 TOTAL!

I WILL SELL THIS PROTOTYPE FOR $15 RIGHT NOW! I CAN MAKE THEM IN THESE COLORS...

http://memimage.cardomain.net/member_images/7/web/379000-379999/379742_399_full.jpg


http://memimage.cardomain.net/member_images/7/web/379000-379999/379742_402_full.jpg


http://memimage.cardomain.net/member_images/7/web/379000-379999/379742_400_full.jpg

http://memimage.cardomain.net/member_images/7/web/379000-379999/379742_401_full.jpg

[A18A]

you should make one that says 3geez like the light cut out thingy, that'll be cool

[russiankid]

you should make one that says 3geez like the light cut out thingy, that'll be cool
Or place the LEDs so when they light up it spells out 3geez.

[A18A]

thats what i ment

[MessyHonda]

yeah lets see if the 3geez one came be made first.

[Tomisimo]

Can you make those in large portion so we can bye it?

I will if you make those with plinkers, park, brake and back white light.

[BITESIZE]

3geez would be pretty hard, plus I don't know if Marc would let me.

[MessyHonda]

3geez would be pretty hard, plus I don't know if Marc would let me.


time to ask.

[HostileJava]

It that just the board or is that how it looks through the diffuser? Just curious cause the row doesn't look quite straight. Figured with the diffuser it might not matter?

[Cheeseburger]

i think if u add more led,s it would look better

[RamThis]

they can be adjusted Im sure, as they are just attached with thin wire legs, so final adjustments would be easy to line them all up. Looks good, but I'd add another row down the middle.

[Civic Accord Honda]

it would be cool all red with a blue honda H logo right in the center

[RamThis]

Illegal, blue is designated for emergency vehicles only.

Blue Dots are illegal too.

[BITESIZE]

You guys want 3 rows?

[MessyHonda]

i want to see it in a tail light...quick some one send him a sedan tail light.

[Civic Accord Honda]

Illegal, blue is designated for emergency vehicles only.

Blue Dots are illegal too.
what about a clear H logog in the center of the red leds

[jonrichert]

I need to see this on a car first, but I'm interested because I have pretty dark tint, and this might shine through a lot better. and no we don't want any "H logogs"??!?!? CAH

[BITESIZE]

I will probably make a big H in red as well!

[Civic Accord Honda]

:Owned:

I need to see this on a car first, but I'm interested because I have pretty dark tint, and this might shine through a lot better. and no we don't want any "H logogs"??!?!? CAH



I will probably make a big H in red as well!
:)

[BITESIZE]

It that just the board or is that how it looks through the diffuser? Just curious cause the row doesn't look quite straight. Figured with the diffuser it might not matter?
They are a little crooked. I whipped through this one quickly. It still took me 1.5 hours to make.

http://memimage.cardomain.net/member_images/7/web/379000-379999/379742_403_full.jpg

[stat1K]

so how much you wanna charge for an H? or one in general? also i think if we found someone to make some plastic covers with cutouts for like the honda logo then you could just pop them in the cutout to line them up. it would be cool but for now i think three rows and or an h would be tight.

[BITESIZE]

I'm thinking $35 shipped, they take a while to make.

[RamThis]

Hey, have you thought about using fiber optic strands to spread the light? I was looking at that plate, and thinking all those little holes would be PERFECT for small FiOp bundles that you could run to a small cluster of LEDs. You could bundle them up, make a small cluster of LEDs that butt up to the end of the cables, use some clear resin to make a solid connection between the lights and the cabling in order to diffuse the light evenly, and heat shrink over the whole thing leaving just your input wires showing.....

[Civic Accord Honda]

Hey, have you thought about using fiber optic strands to spread the light? I was looking at that plate, and thinking all those little holes would be PERFECT for small FiOp bundles that you could run to a small cluster of LEDs. You could bundle them up, make a small cluster of LEDs that butt up to the end of the cables, use some clear resin to make a solid connection between the lights and the cabling in order to diffuse the light evenly, and heat shrink over the whole thing leaving just your input wires showing.....
X2 that would be PIMP

[BITESIZE]

X2 that would be PIMP


R u trying to kill me. do you know how much work and time it would take. Maybe I'll make "me" one.:Owned:

On a good note, I just made these turn signal harnesses with a built in Smoked sidemarker turn signal! These were Messys but he hasn't shown interest so here they are for sale.... Comes with 3 feet of wire for the sidemarkers. Led in sidemarkers is orange and the others are bright white.

http://memimage.cardomain.net/member_images/7/web/379000-379999/379742_404_full.jpg

[Civic Accord Honda]

lol messy going to kill you lol

[BITESIZE]

lol messy going to kill you lol


Nah, these are my own harnesses. He didn't send me any dough yet, so he won't be. :welcome:

[MessyHonda]

lol messy going to kill you lol

damn sure he is.....:gun:


Nah, these are my own harnesses. He didn't send me any dough yet, so he won't be. :welcome:
hey bitesized i paypaled you....you dont remember?

[BITESIZE]

^^^I'm bad, i just checked my paypal. So many people have sent me money and bought things. I wrote it down undersomeone elses name

[RamThis]

R u trying to kill me. do you know how much work and time it would take. Maybe I'll make "me" one.:Owned:



You lazy so and so LOL.

Really though I think you could make the lights easier this way, and it would be super simple to fill the entire housing with "lights" using a centrally mounted LED cluster. If not easier, at least about the same amount of time while having the light evenly distributed through the lens.

Only thing is I dont know how bright it would be , maybe you could use the SuperFlux LED's as the illumination source?

[BITESIZE]

Basically like a led fibre optic lit christmas tree

[race12001]

hey since i am emrgency personel how bout a blue h for me to match my blue corner markers ;)

[RamThis]

Basically like a led fibre optic lit christmas tree
Yeah except when you hit your brakes it'll be christmas all year long!! :rockon:

[MessyHonda]

Yeah except when you hit your brakes it'll be christmas all year long!! :rockon:

thats not cool..i dont wnat to blind the car behind me..cuz then he will rear end me.

[race12001]

hey at least if hes high beaming you all you got to do is hit the brakes to get him back

[MessyHonda]

hey at least if hes high beaming you all you got to do is hit the brakes to get him back

lol....that is when my drilled and sloted rotors and AEM pads come in....they stop in a dime..plus they look hot...lol

[race12001]

well some of us aint got that luxury

[MessyHonda]

well some of us aint got that luxury

why do you think im broke? hehe...one of the best 200 bucks i ever spent on a car.

[RamThis]

why do you think im broke? hehe...one of the best 200 bucks i ever spent on a car.

Amen brotha. I put Powerslot rotors and Wagner ThermoQuiet pads on the front of my Ram a couple months ago, man, what a difference. High quality brake components really do make a very noticable difference.



And I sincerely doubt the brake lights would be bright enough to bother anyone. Red is a color that does not cause glare in the eyes, that's why it's used alot in military aircraft and such, you can see fine in red light, but it does not glare like white light can. The Fiber optic idea would actually drop the light level a bit, as there is a small loss in transmitted light through the cables, this is why I mentioned using SuperFlux lights to offset it.

[race12001]

hey its hard enough to come up with the money for a radiator much less fancy brakes

[RamThis]

Hell I had to put $600 in the Ram for rotors, pads, DS wheel hub, heater core, and all coolant lines, all work done by myself so no labor charge.

This was two weeks after I spent $400 on a new radiator and Condensor Fan Motor, and all new hoses for the Acura.

And a week before the radiator went on the Acura, my heater hose blew on the 3G and took out my engine, and the car is still in my garage torn down as I totally refurbish it, requiring the purchase of a parts car and alot of replacement parts to update the old beater.

Plus my wife and I have both been laid off from our jobs in the past three weeks.

Now that, my friend, is how you keep life interesting.....:help:

[MessyHonda]

Hell I had to put $600 in the Ram for rotors, pads, DS wheel hub, heater core, and all coolant lines, all work done by myself so no labor charge.
This was two weeks after I spent $400 on a new radiator and Condensor Fan Motor, and all new hoses for the Acura.
And a week before the radiator went on the Acura, my heater hose blew on the 3G and took out my engine, and the car is still in my garage torn down as I totally refurbish it, requiring the purchase of a parts car and alot of replacement parts to update the old beater.
Plus my wife and I have both been laid off from our jobs in the past three weeks.
Now that, my friend, is how you keep life interesting.....:help:

wow man...one min you are doing all good the next everthing goes bad when you least expect it.

[KrazyKlown]

Hell I had to put $600 in the Ram for rotors, pads, DS wheel hub, heater core, and all coolant lines, all work done by myself so no labor charge.
This was two weeks after I spent $400 on a new radiator and Condensor Fan Motor, and all new hoses for the Acura.
And a week before the radiator went on the Acura, my heater hose blew on the 3G and took out my engine, and the car is still in my garage torn down as I totally refurbish it, requiring the purchase of a parts car and alot of replacement parts to update the old beater.
Plus my wife and I have both been laid off from our jobs in the past three weeks.
Now that, my friend, is how you keep life interesting.....:help:
I feel ya, been there...done that...too many damn times! :toilet:

[BITESIZE]

Why do people hijack threads? I don't understand why you don't just use the P.M. feature.

[MessyHonda]

Why do people hijack threads? I don't understand why you don't just use the P.M. feature.

cuz they fill up quick maing...i just deleted some cuz i had 324/325...but sorry

[BITESIZE]

^^I still love you but, there are alot of you that need to quit posting usefull information. lol

[race12001]

Hell I had to put $600 in the Ram for rotors, pads, DS wheel hub, heater core, and all coolant lines, all work done by myself so no labor charge.
This was two weeks after I spent $400 on a new radiator and Condensor Fan Motor, and all new hoses for the Acura.
And a week before the radiator went on the Acura, my heater hose blew on the 3G and took out my engine, and the car is still in my garage torn down as I totally refurbish it, requiring the purchase of a parts car and alot of replacement parts to update the old beater.
Plus my wife and I have both been laid off from our jobs in the past three weeks.
Now that, my friend, is how you keep life interesting.....:help:

i fell ya pain my jobs slowed down so much i work only 1 day a week and i hadnt worked any thiss week

[BITESIZE]

http://memimage.cardomain.net/member_images/7/web/379000-379999/379742_418_full.jpg

http://memimage.cardomain.net/member_images/7/web/379000-379999/379742_417_full.jpg

[RamThis]

Why do people hijack threads? I don't understand why you don't just use the P.M. feature.


Sowwy....:hs:

[Cheeseburger]

^^I still love you but, there are alot of you that need to quit posting usefull information. lol


we all have had our moments :hsugh:

[Gemini2003]

I Like the two rows of LED's it's sleek ... three tight rows would look good aswell.

I would like to buy one... can you PM me with details?

[BITESIZE]

^^Pm sent!

[race12001]

i like the four rows

[race12001]

but i like tons of light

[BITESIZE]

Just got an idea! I'm going to get some longer boards.

http://memimage.cardomain.net/member_images/7/web/379000-379999/379742_423_full.jpg

[MessyHonda]

sweeeeeet!

[A18A]

yay for my idea :D i guess there wasn't enough room on the board for the Z? lol

[BITESIZE]

yay for my idea :D i guess there wasn't enough room on the board for the Z? lol


Too bad there isn't enough room. I'll be getting some longer ones!:welcome: :rant:

[NOAHS88accord]

BITESIZE,


PM me with the cost for a total light replacement (blinkers, sidemarkers, dash, heater switch lights, tail lights, 3rd brake light, and any others you could make, I can pay for it all, just need a price)

[BITESIZE]

BITESIZE,
PM me with the cost for a total light replacement (blinkers, sidemarkers, dash, heater switch lights, tail lights, 3rd brake light, and any others you could make, I can pay for it all, just need a price)

Are you going to send me your items, so I replace the stock bulbs with new leds? Also, it's better to send me like at the most, 4 items. Then when I'm done with those, ship some more to me. That way I don't get overwhelmed. I have alot of customers that's why. :) I'll still cut you a deal if you plan on doing all those.

[race12001]

3geez awsome you should fill in the rest with white leds