PDA

View Full Version : Possible B20A Exhaust Flanges FS



RobT5580
01-06-2007, 07:13 PM
Im working on getting flanges custom made for my B20A turbo project and im thinking of selling some. They are being made by a high end company and im getting mine done in stainless steel cause my new manifold is going to be tig welded with all stainless piping.

If you are interested (SERIOUS People only) let me know and if i order extras you will have to give me 50% up front or more depending on my cost by volume.

I will find out price hopefully sometime next week if we come to an agreement and i ship them a template.

TWOLOUDNPROUD
01-06-2007, 07:23 PM
When you get a rough cost on it let me Know

RobT5580
01-16-2007, 09:03 PM
Ok the flanges are going to be a one time deal and only available through me at this time. They are stainless steel and are going to run $100 each due to the low volume and the high quality material being used. If your interested in these let me know asap because the money is going out next week sometime and that will be it.

Im keeping the specs to myself since im fronting the money for the CNC program and they charge more since its a low quantity item.

I will keep it open until January 26th but it has to be paid via paypal 100% and the items wont be ready until 4-6 weeks once they get a template.

MessyHonda
01-16-2007, 09:51 PM
Would the prelude boys want these?

Go to prelude power

I'm not sure if they are the same thing for them also since its a b20a5

snoopyloopy
01-16-2007, 10:35 PM
if the b20a5 headers bolt up, then the flange should be the same. and of course, there's always the preludes with the 1g b20a. so yeah, head over to pp and peddle your wares.

MessyHonda
01-16-2007, 10:49 PM
lol....yeah they should work...but they might bitch...most of the 3rd gen ppl are werid...if you want a good laugh head on over and check out all the threads..

snoopyloopy
01-16-2007, 10:56 PM
could also hit up other forums as we aren't the only two. www.hondaswap.com might get the word out if nothing else, as well as www.absoluteprelude.com.

RobT5580
01-17-2007, 07:41 AM
Thanks guys but im not looking to make a big deal of this i was more or less trying to help out other JDM B20A owners and i know there are not many that would consider this. As for the prelude B20A5's these will work but you have to redrill some of the holes. Im sure someone already makes those anyway and i dont like to hack stuff up thats why im going with a custom stainless steel flange.

b20a86lude
01-30-2007, 04:15 PM
im very intrested and will put down the cash for sure in a second if some one can get me a b20a na header stainless steel or lookin like a a turbo im down but if this is only for turbos then no

RobT5580
07-13-2007, 12:57 PM
Just to let you guys know my flanges are finally done. I had stainless steel ones made because im going to have a custom turbo manifold made (hopefully a top mount). But i have 2 flanges so i might have a spare or possibly can order more. They are top notch and fit 100% so if anyone needs one pm me. I will try to post pics later!

RobT5580
07-14-2007, 03:16 PM
http://thumb4.webshots.net/t/50/550/2/51/58/2304251580084712684EtaMGO_th.jpg (http://good-times.webshots.com/photo/2304251580084712684EtaMGO)

MessyHonda
07-14-2007, 06:29 PM
they look very nice. too bad we dont have alot of b20s in the state side.

carotman
07-16-2007, 05:34 AM
Whoa..... nice!

AccordEpicenter
07-16-2007, 10:06 AM
if you guys are looking for 3/8" b20a or a20 weld flanges you should contact aaron weir (weir racing) and see what he can do, hes starting to make some flanges again... Not trying to jack your thread rob but it might be another option for guys that dont need/want stainless flanges.

RobT5580
07-16-2007, 01:46 PM
The company i used uses alternative materials i chose stainless because my mainifold is going to be stainless/tig welded. No offense taken i just contribute to save others time/money but there are not a lot of people doing B20's so this is for the few out there. I post it more or less because i recall a specific person that rather than help others here he held back info that would have brought many others into the B20A world long ago. But for the few that have attempted to break down the barriers hats off to them for their contribution and eagerness to come this far.

b20a86lude
06-20-2008, 10:55 AM
any updates

RobT5580
06-20-2008, 03:06 PM
I have one for sale for $100 plus shipping in the market place. Its stainless steel not mild steel.

Ichiban
06-21-2008, 06:29 PM
t.

Im keeping the specs to myself since im fronting the money for the CNC program and they charge more since its a low quantity item.



Have them send me the CNC program.

RobT5580
06-22-2008, 02:50 PM
Last i heard the company was on the rocks and guys on honda-tech were not happy but he was a reputable guy. I paid a premium price for them but i didn't want a bad flange that would warp.

ChaseR
06-24-2008, 09:18 PM
any updates

Hey so what are the updates on you selling me that grenaded transmission with no 5th or third gear????? Why did I have to install it and drive the fucker 300 miles in 4th gear until it seized up??? and updates on my refund?

TWOLOUDNPROUD
06-24-2008, 09:45 PM
Dam

RobT5580
06-25-2008, 01:13 PM
For the record he is not referring to myself just incase some take it that way.