mmmm garret goodness!

[ZackieDarko]

Recently picked up a garret for my new engine ;)

came off a volvo 240 only cost $60, and if i ever need a turbo manifold for a volvo 240 series i gots one!

has NO shaftplay :-D

it is a little on the "small" side but it should spool nice and quick and should be good for 10-12 psi all day long

before

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0934.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0931.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0923.jpg

after a little bit of elbow grease and a rag

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0938.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0948.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0943.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0942.jpg

[ghettogeddy]

what series volvo motor was it
B230FT if so i might be interested in the mani

[ZackieDarko]

dunno

tried looking on the net but haven't been able to find much

more pix

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0957.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0954.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0953.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0952.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0950.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0930.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0929.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0928.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0927.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0920.jpg

[Legend_master]

Hit that with some brake parts cleaner and all that grime will fall right off. Just make sure to cover the inlets on the turbo, so the grime dosent go inside the turbo. Good find BTW

[ZackieDarko]

and more

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0916.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0915.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0914.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0913.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0912.jpg

[ZackieDarko]

seeing this badboy reallllly makes me wana just get a set of DX pistons some new oem rods cryo them rebuild a head and thow it all together and figure out some fuel management and go!

forged internals can wait :-p

[Legend_master]

seeing this badboy reallllly makes me wana just get a set of DX pistons some new oem rods cryo them rebuild a head and thow it all together and figure out some fuel management and go!
forged internals can wait :-p


That turbo will certainly not push to the limit of forged pistons, but with a really good tune you could run some nice boost on stock internals.

[MessyHonda]

you get it at the junkyard?

[3rdgenhatchDX]

seeing this badboy reallllly makes me wana just get a set of DX pistons some new oem rods cryo them rebuild a head and thow it all together and figure out some fuel management and go!
forged internals can wait :-p

Cryo= waste of time and money...

[ZackieDarko]

no but the guy i got it off of did

anybody want the manifold? i'll let it go cheeeeeeeeeeap

[Bglad420]

What year Volvo from?? Do you know the turbo specs??

[MessyHonda]

yeah now all you have to figure out is how to do a OBD1 conversion

[Legend_master]

yeah now all you have to figure out is how to do a OBD1 conversion


or buy open loop's setup :thumbup: .

[MessyHonda]

or buy open loop's setup :thumbup: .


its already sold....to boba....i saw it in person...and for 300 bucks it does save you a big ass headache unless you like to wire stuff up for fun.

[teck]

great find

[Legend_master]

its already sold....to boba....i saw it in person...and for 300 bucks it does save you a big ass headache unless you like to wire stuff up for fun.

Well NM on that Idea then, and yes an obd1 setup is easlily worth $300.00 already putt together.

[b20a86lude]

yea reperesent my name

by the way my name is garret.:)

[MessyHonda]

yea reperesent my name
by the way my name is garret.:)


you should garret your b20...lol

[Cheeseburger]

nice!

[ZackieDarko]

how about we end the thread jacking? :-p

update:

i tryed to remove the manifold last night and just ended up spliting open 2 knuckles in 3 different spots


*edit*

new myspace default pic

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0943.jpg

[cubert]

how about we end the thread jacking? :-p
update:
i tryed to remove the manifold last night and just ended up spliting open 2 knuckles in 3 different spots
*edit*
new myspace default pic
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/102_0943.jpg


rusty stuck shit owns all...


but it does give an excuse to break out the torches :lol:

[snoopyloopy]

nice. can't wait to see how you do it up in the 3g.

[ZackieDarko]

i found a guy in my area that will make me a manifold :)

can we say nearly boosted 86 hatch in about 2-3 months?

[MessyHonda]

i found a guy in my area that will make me a manifold :)
can we say nearly boosted 86 hatch in about 2-3 months?



keeping my fingers crossed.....dude hook it up see if the guy want to make manis for us...il bet ppl might buy if the price is right...

[ZackieDarko]

would u guys pay 350 for a log?

[MessyHonda]

would u guys pay 350 for a log?



i dont think so.....nice try tho.....i am cheap....so for 350 i could get all bolts ons for NA.

[ZackieDarko]

here are some b-series ones he has made

http://www.advancedstreetperformance.com/Images/log_manifold_comp_pass_side.jpg

http://www.advancedstreetperformance.com/Images/log_manifold_top.jpg

http://www.advancedstreetperformance.com/Images/log_manifold_bottom.jpg

top mount

http://www.advancedstreetperformance.com/Images/top_mount_1.5_turbine_side.jpg

http://www.advancedstreetperformance.com/Images/top_mount_1.5_front.jpg



www.advancedstreetperformance.com

[cubert]

i say 350 for a log mani is a pretty good price...not much more than youd pay for a header...

[MessyHonda]

looks good i would have it ceramic coated after.

[reanimator420]

that log looks pretty damn good. i would pay 300 all day for an a20 log that isn't even made by any aftermarket companys.:violin:

[LiTtLe xOx BitT]

That log looks pretty good. I have some questions though. What turbo will he be making them for? and what are you going to do as far as a downpipe?

[ZackieDarko]

i explained to him that its for an A20 and that it will definetly be a little different then what he normally does

it will be for my garret (which i think is a T25 btw) and as for a down pipe im gonna hit up the yards find an OEM one and have one fabed from that unless he can make one for me just by looking at teh turbo


he said he can make a top mount for $800 if anybody is intrested in one of those bad boys


he also said he would need half down if i want a manifold , so i am assuming if any of you want one the same would be required

[LiTtLe xOx BitT]

Theres not much of a downpipe on our stock setup because of how far the manifold goes down. A downpipe will have to be fabbed up on the car most likely. Once he installs the manifold and bolts the turbo to it he can get the measurements and the angles of the bends for the downpipe.

[ZackieDarko]

i cant decide if i wana get the manifold made in about a month or pick up a spare engine and let it sit there while i tear it down

[MessyHonda]

do a rebuild

[ZackieDarko]

well i found an engine localy (complete) with a B16 intake mani already moded for it for $200

should have it in 3-5 weeks :)

[b20a86lude]

i want to c a pic of that motor with the b16 mani modded on it

[gosse]

here are some b-series ones he has made

http://www.advancedstreetperformance.com/Images/log_manifold_comp_pass_side.jpg

http://www.advancedstreetperformance.com/Images/log_manifold_top.jpg

http://www.advancedstreetperformance.com/Images/log_manifold_bottom.jpg

top mount

http://www.advancedstreetperformance.com/Images/top_mount_1.5_turbine_side.jpg

http://www.advancedstreetperformance.com/Images/top_mount_1.5_front.jpg



www.advancedstreetperformance.com
thats a good price for the manifolds, the welds looks very nice and its looks like stainlees steel, another price from ordinary iron pipes..
they look great...

[AccordEpicenter]

by the looks of that turbo it has already been rebuilt at some point.

[cubert]

Damn this turbo thread...i need to get to the JY and find me a deal like this...

[AccordEpicenter]

you can find alot of good stuff at junkyards and you can find alot of just junk, do your research before you go, itll save you time and headaches

[entrig8666]

That sounds good to me...