PDA

View Full Version : Big problem please help



Beanshonda55
01-30-2007, 07:36 PM
Okay guys my problem is that my defrost is working just not coming out. I took of my dash agian and i found out that these 2 motors arent morking that open and close the passageways. i tested to see if they both had power at the plug and they do? DO u think both of the motors are bad? any info would help. Pics are on my new cardomain web site http://www.cardomain.com/ride/2558720/1
Thanks Adam

teck
01-30-2007, 07:38 PM
maybe your motors are burnt out?

88Accord-DX
01-30-2007, 08:01 PM
Run you some 14 gauge solid wire off a 12 volt car battery to the motor connector terminal... If the motor turns the blend door, motor is good. If it don't, the motor is bad.

Sounds like the motor is bad, but that is for sure way to make sure.

Beanshonda55
01-30-2007, 08:12 PM
okay i will try that tomorrow thanks, what is the motor right by the passenge side door because it doesnt work either. And those motor would be the same off an 87lx right?
Thanks agian

88Accord-DX
01-30-2007, 08:19 PM
If I'm looking at the right pic, the one that has round part under some grated vents, that is the blower motor (round shape underneath it). The motors should be the same, I think they would be.

MessyHonda
01-30-2007, 09:43 PM
nice tint....i got some same but my rear window is also tinted...lol

MessyHonda
01-30-2007, 09:44 PM
http://memimage.cardomain.net/member_images/2/web/2558000-2558999/2558720_1_full.jpg

Beanshonda55
01-31-2007, 10:04 AM
thanks i still have to get the back one tinted because those doors and windows are from my parts car and i dont want to swap rear windows, the motor im talking about is right beside that it opens and closes some doors or something like that i think.
And im going to put more pics on cardomain tonight.