QW: Prelude Drive Axels Swap

[Tomisimo]

Have enyone done this?

I wander if it is posible to swap a prelude DriveAxels to our A20 trany? (manual)

[ZackieDarko]

Id guess the A18/A20 one's would

doubt the B20's would

[2ndGenGuy]

The 2g Prelude dual carb ones probably won't work, but I don't see why any of the 2g fuel injected ones won't work. I don't know about length, but from what I understand they're the right splines. I know that the splines are the smaller on the 2g dual carb Prelude than the 3g Accord.

[MessyHonda]

axels are cheap...

[Tomisimo]

Well. its not the money its just i feel when I chenge gears and relise clutch "easy" it cicks like mule, realy anoing to drive around town. so i think thet Lude axels maght be stronger. I checed with a clutch plate, it was nice and useble, so i think the problem lies in axels.

[2ndGenGuy]

You sure your flywheel isn't warped? It will warp just like a brake rotor and cause those same symptoms. Might want to get it resurfaced. Your clutch could even be out of balance.

[HondaBoy]

what do you mean by kicks like a mule? you mean it engauges into gears hard? worn motor mounts can cause this feeling also.

[Tomisimo]

what do you mean by kicks like a mule? you mean it engauges into gears hard? worn motor mounts can cause this feeling also.

It might be it tho. Car kicks even if i push gas pedal in low speeds. like cruisen at 20-30 mph.