Teg LS Door panels look like 3g's...

[3rdgenhatchDX]

http://i10.photobucket.com/albums/a116/3rdgenhatchdx/Integra/117_0815.jpg


Think they interchange?

[mkymonkey]

try it :thumbup:

[3rdgenhatchDX]

try it :thumbup:

Sad to say i sold the 3g... remember?

I bought what's in my sig...

[mkymonkey]

junk yard foo! i'd say go to a jy and look for a teg like yours and 3g...take the door panel off...and try it out on the teg you'd find in the jy

[Oldblueaccord]

I wondered about the hoods myself if they got the pop up lights they gotta be close.



wp

[3rdgenhatchDX]

I wondered about the hoods myself if they got the pop up lights they gotta be close.
wp

Word, i dunno it's like the teg is the Acura version of the 3g it's 86-89 aswell ya know?

look at the door locks for instance, bright fuckin orange, i wonder if a D16A1 would bolt right into a 3g lol that'd be saweet...

[mkymonkey]

the hoods are not the same...the 3g headlights are what makes the difference...the tegs are i believe smaller and at a different angle

[3rdgenhatchDX]

the hoods are not the same...the 3g headlights are what makes the difference...the tegs are i believe smaller and at a different angle

They use the same bulb/assembly like H6054 or w/e right?

[mkymonkey]

yeah...but the bucket is whats different

[A20A1]

oddly enough I saw a accord with the teg front end or a teg with the accord front end... I think it was the first way but it really tripped me out.

The hood wont just drop in though.


They use the same bulb/assembly like H6054 or w/e right?
Those light housings are pretty universal.

[3rdgenhatchDX]

Yeah there's got to be a cut or two somewhere :D

[mkymonkey]

look at the diff

http://memimage.cardomain.net/member_images/9/web/597000-597999/597708_18_full.jpg

different angle
http://memimage.cardomain.net/member_images/6/web/2490000-2490999/2490707_3_full.jpg

different size this is next to a 3g
http://memimage.cardomain.net/member_images/2/web/650000-650999/650736_27_full.jpg

[A20A1]

The conversion looked a lot better then this one :)
http://www.cardomain.com/ride/473774
http://images.cardomain.com/member_images/5/web/473000-473999/473774_1_full.jpg
http://memimage.cardomain.net/member_images/5/web/473000-473999/473774_8_full.jpg

[gp02a0083]

junk yard foo! i'd say go to a jy and look for a teg like yours and 3g...take the door panel off...and try it out on the teg you'd find in the jy


ahhh gotta love monkey's engunity now if only engine swaps could be dont just as fast lol

[3rdgenhatchDX]

3g teg lol!

[ZackieDarko]

look at the fucking body lines THEY ARE WAY OFF...jesus christ his bumper doesnt even line up with the fenders correctly ..the hood is off too and he has those ricer ass windshield wipers


is this CAH's secret project car?

[MessyHonda]

dont the hatches have the seatbelts on the doors? if they do the teg panels might not fit.

[lostforawhile]

dont the hatches have the seatbelts on the doors? if they do the teg panels might not fit.
the 86 don't,that almost looks like an 86 door with a different upholstery insert. I could make that fit if I wanted to,it would just involve removing the upholstery carefully and reshaping the door panel to fit. it would probably be best to plan on new upholstery in the entire car if you did that. but as far as the armrests and all it could be made to fit. I forget what door pulls I got,they look factory in my car,but they aren't. I stripped everything off both my front doors and quarters,except the pocket, the speaker,and the plastic piece that forms the top of the door,then I made new panels from scratch.

[Accord88LX]

that 3g is hideous...ugh

[Civic Accord Honda]

poor 3gee :(

.....
i would like to sawp the whole front of a 1st gen teg and mount it to a 3gee sedan but not mine

[carotman]

You could bolt a 1g teg to a 3g civic, but not a 3g accord.

I'm sure the door panels are off. Might be modable but it's not a direct bolt in. Just look at the inner door handle, it's not in the same place as a 3G accord. It sits much lower.