Body Work - All in One [Lots of Picks]

[Tomisimo]

I decide to keep one thread updated, so i gather them all together...
Attention: All pictures was taken with my Nokia Phone.

I'll kick off with first repairs i done on my car.

When i got the car it looked like POS. Rust in Channels(rockers), That was fixed first.

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/23072006011.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7663.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7670-1.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7694.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7689.jpg
It was original look, before all repairs ^^^

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7676.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7674.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7672-1.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7675.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7677-1.jpg

There was so much rust underneath thet it was not legal to drive in it anymore so i decide to fix thet first.

[Tomisimo]

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7678.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7722.jpg

Prefiting ^^^

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7723.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/DSCN7721.jpg

Shortly after, they was weldet shot to the car, Car is born
Now car is street legal again!!!

A year hasnt passed from thet moment of glory. I drive off the road in pore condition. Winter, snow, dark, slopes and bad tyers is all factors to have a accident.

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/13012007005.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/13012007.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/13012007006.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/13012007004.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/13012007003.jpg

I was totaly depres, and was concidering to get rif of my 3Gee, but You ppl save me from doing thet. Thenk You Guyes!!!

[Tomisimo]

So I began to do repairs. I was lucky to drive car in to a school garage. Where it all starts.

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007001.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007002.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007004.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007005.jpg

I run on a road def.rail, as you probably see.

Nothing else to do but to disassemble all damaged parts.
Here's what I end up with

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007008.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/26012007001.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007010.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007012.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/26012007-1.jpg

All that was still alive was stored to the better times )))

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007025.jpg

[Tomisimo]

Next day I got to work on the front.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/26012007008.jpg
Straighting it out first then weld it shot.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/26012007004.jpg
and paint it in primer.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/26012007012.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/26012007011.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/26012007013.jpg
It was a day of satisfaction. Lots done, pain in my hands and my back indicates a good progress.
Then it was time to repair damage at the rear.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007016.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007015.jpg
Shortly after a quick look i find that the car was damaged before at that area.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/25012007017.jpg
I got in that tho. Removed old body filler.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/01022007009.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/01022007004.jpg
At that time i toad. -=When All this Gona Stop=-
I was finding more and more and even more, what needed to be fixed.

[2oodoor]

progress, great
did you install those extra red lights in the rear bumper?

[Tomisimo]

While i was rubbing that ass full of filler I discovered that under rear bumper it was rust, lots of it.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007020.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007023.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/31012007003.jpg
I clean that mess up an beat new one out of a 1mm sheet metal. Hard labber i must say, with out right tools.
Here goes nothing
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007005.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007007.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007002.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007033.jpg
Like i said that i was still finding more rust and stuff to be done.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/01022007.jpg
Gues how much rust theres on the inside?!

[Tomisimo]

To bad i have no picks of that moment. But i do have this cut out hole
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007001.jpg

At this time i got low on resources (money). I had no choice but to make my own panels and inner arches. Where the hole is. I had to make them in sections, because of curvature of it and puzzle it all together.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007028.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/07022007001.jpg

Because I don't have a spare outside panel I used a sheet metal to form the arches.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/07022007006.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/07022007005.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/07022007009.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/07022007003.jpg

Yup... don't pretty sight. So I grind welds off
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/15032007006.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/15032007004.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/15032007025.jpg
That was it...
To tell you the truth, i'm kinda bored with all this metal shaping and laying under the car and weld in lotus position.
So i turned to more fun part of body work. Dent repairs.

[Tomisimo]

To get to it I had to remove all door panels and windows. Rubber sealing and wiring.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Interior/29012007001.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Interior/29012007003.jpg
All this trouble because of this
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/29012007005.jpg
http://http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/29012007007.jpg
Some kids in the naberhood have left theirs foot prints in it. Well i got to fix that tho.
Cleaned that up first.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/29012007012-1.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/29012007013-1.jpg
Right after I welded studs to this dent
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/29012007015.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/29012007014.jpg
And volla
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/29012007016.jpg
Sadly, all that afford was going to waste. because i got me a donor car.

[Tomisimo]

Well i bout me a donor car in mint condition. I part it soon after.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/22022007.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/22022007003.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/22022007007.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/22022007009.jpg
This car had the same faith as mine, but I take care of mine. Rust in same places.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/22022007020.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/22022007024.jpg
Soon it looked like this
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/22022007041-1.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/22022007043-1.jpg
I fill it up with my damaged parts and derived it to JY.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/23022007009.jpg
I had fun with it tho ))) Here is short Videos
http://www.youtube.com/watch?v=6XCN3zIhqiw
http://www.youtube.com/watch?v=645I8EZ_amU
It was fun.

[Tomisimo]

As time gone by, i was in trouble with my girlfriend, I was depress for some time, so I have polished head cover
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/01032007016.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/01032007020.jpg

After polishing i realized that something is messing, so i musk it up and painted with black color
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/05032007.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/05032007006.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/05032007001.jpg

Finish product.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/05032007013.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/05032007011.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/05032007015.jpg
I must admit that my engine bay is derty. I'll clean it up when good weather comes.

And i removed CamGear cover too. + I moved ground cable from the front of the engine.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/05032007018.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Engine%20Works/05032007020.jpg

[Tomisimo]

Right after I welded Evil Eays to the bonnet. Like Thegreatdane did on hes.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/01032007022.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007007.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007005.jpg

Weeks gone by. I got sick one time. Didn't get any progress. But last week have been stressfully for me. My teacher said that i MUST get my car out no mater what by Friday(today03.29.07)
So this whole week I have been in constant rush to do as much as possible.

I removed door moldings, welded fenders shot, reforbesh front bumper, fill body filler to my rear fender, sand it all and primer almost whole car.

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/15032007025.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007002.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007001.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/16032007003.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007010.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007051.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007047.jpg

[Tomisimo]

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/05022007018.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007045.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007013.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007018.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007020.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007041.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007043.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007024.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007032.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/21032007035.jpg

[Tomisimo]

So finally I got all this under control. I drive my car out today.
Here last picks I've take of her
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/23032007001.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/23032007005.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/23032007011.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/23032007006.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/23032007008.jpg....
Those door moldings are pain in the ass. I don't finish with them...
Here some snap shots
My tool box
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/23022007014.jpg
Tools i used for stud welding
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/05022007008.jpg
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/05022007026.jpg
Stereo I got for free. non MP3.
http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Interior/21032007053.jpg
Well thets it. If You have any questions i'll be happy to anser them...

[Tomisimo]

progress, great
did you install those extra red lights in the rear bumper?

Yup... but i dont have picks of them yet. got to install tail lights. then i take pictures.

[ZackieDarko]

WoW thats a lot of work..good job!

what kind of struts are those you have on there?

[BITESIZE]

Damn son!! I can appreciate your work!!!! Good job!

[mkymonkey]

holy lots of fucking body work son! that shits tight. i like how some of you guys just dont give up. rust suck on this! haha....hmm sounds like a good sticker haha. anyway great job maing. i know if it was me, i would have sold it and bought something else. but if youre doing it to gain experience then kudos my friend!

[lostforawhile]

thats amazing!! for the little resourses you have you have done an amazing job!! :) I like the evil eyes. we have people at my tech school who whine that they don't have enough materials or equipment,you have done a better job then some of them have done with almost nothing .

[Tomisimo]

WoW thats a lot of work..good job!
what kind of struts are those you have on there?

I dont really know, I bout my car with them installed. They need to go.
those are old and used well. If You see on the first picture on this thread, then You see thet the rear is slightly lower then the front... First sign.

[Tomisimo]

thats amazing!! for the little resourses you have you have done an amazing job!! :) I like the evil eyes. we have people at my tech school who whine that they don't have enough materials or equipment,you have done a better job then some of them have done with almost nothing .

Thank You all for good chear up, first of all. Coz I'm a bit down today. It was a hell to get this much done in just one week....

As for You lostforawhile. I student be at your school, serious. My teachers is always whine, about "The Dust, Noise, Smoke of Welding, Aerosol spray... blablabla" I was sick to hear all this. So they chick me out today. eventually mi car. I was so pissed, coz all i needed is just one more week. thats all...

[Tomisimo]

but if youre doing it to gain experience then kudos my friend!

Thanks Mky. Have question for You. What KUDOS actually means?

[MessyHonda]

nice work man....i like the evil eyes

[mkymonkey]

http://en.wikipedia.org/wiki/Kudos

[Tomisimo]

:) I appreciate Mky...

[A18A]

wow thats just amazing, all that work, such a restoration projcet, awesome!!, I love it

[carotman]

Kudos indeed!

[forrest89sei]

LOOKS GREAT!!!! :thumbup: :D


Keep up the great work!!!

[bullard123]

Holy tons of pictures Batman!!! Great job on the body work time for some paint now.

[lostforawhile]

Thank You all for good chear up, first of all. Coz I'm a bit down today. It was a hell to get this much done in just one week....
As for You lostforawhile. I shudent be at your school, seriost. My tichers is allways whine, about "The Dast, Noise, Smoke of Welding, Arosol sparay... blablabla" I was sick to hear all this. So they cick me out today. eventualy mi car. I was so pissed, coz all i needet is just one more week. thets all...
why in the world is a shop teacher complaining about noise and smoke? my autobody tech teacher would love you being able to do that kind of work, if you went to school here with a diploma you could be a top body man. he has trouble getting some of his students to create dust and smoke,they want to hang out and not work. smoke is encouraged here. LOL. not everybody can do that kind of work,you have talent.

[Tomisimo]

I was thinking to paint her, but theres much more body work must to be done. And a bodykit before she goes to paint booth...

I forgot to mention that i also have done the Short Shift. It was simple. I cut it in 3 peaces, cut out couple of mm. and then welded back together with TIG. now i have 30-40% shorter shift travel. )))
Also I've been at the J/Y resontly where i fund a boot from 5th gen Accord. That will be change soon... I also spotted nice Prelude seats. Was wandering if anyone have tried them to install in ours 3Gee? From 4th gen Lude. To bad, it had non VTec. Just F20a R-Cat SOHC in it.

[speedpenguin]

You should be extremely proud. That's a shit-ton of bodywork you just did.

[88Accord-DX]

Good work Torismo. Pics took a toll on my computers virtual memory, lol.

Maybe spray some rubberized undercoat on the bottom & around the fender wells real good, so as to block some of that snow & salt from rusting it up again. I dunno, that's what I plan on doing in the near future to keep the rust back.

[A20A1]

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/23032007001.jpg

it would be neat to see your accord with front lights and grille like the car next to you.

even the bumper on that car looks like the Mugen one.

.
..

[Tomisimo]

why in the world is a shop teacher complaining about noise and smoke? my autobody tech teacher would love you being able to do that kind of work, if you went to school here with a diploma you could be a top body man. he has trouble getting some of his students to create dust and smoke,they want to hang out and not work. smoke is encouraged here. LOL. not everybody can do that kind of work,you have talent.

Thank You. I'm not that much of a talent really. I just do what I think is necessary to keep my car going.
I wouldn't be happy to go at school You at. Reason why they whine is that we have a combined school, we have welders, mechanics, and carpenter's. Body Work is in one with a mechanics. Its just one module we need to get true. So thats a bit of a problem at my school, when someone do this much as i doo. but I dont care. I did what most toad was impossible...
Right now I search for a garage to rent so I cud finish what i started )))

[Tomisimo]

Good work Torismo. Pics took a toll on my computers virtual memory, lol.
Maybe spray some rubberized undercoat on the bottom & around the fender wells real good, so as to block some of that snow & salt from rusting it up again. I dunno, that's what I plan on doing in the near future to keep the rust back.

I was thinking to deal with that problem a bit differently. I toad if I'm fiberglass two coats under each fender(wheel arches). and under the trunk. That way I newer and i mean Newer gonna get rust under there.... I'll maybe add couple of pound of weight to the car. but that i can live with.

[Tomisimo]

You should be extremely proud. That's a shit-ton of bodywork you just did.
I can proudly say that my car is rust free )))

[Tomisimo]

http://i91.photobucket.com/albums/k313/Tomisimo/My%20Honda/Body%20Work/23032007001.jpg

it would be neat to see your accord with front lights and grille like the car next to you.

even the bumper on that car looks like the Mugen one.

.
..

That car aside of mine is a Opel Manta GT. I did body work on that car too. You see those white spuds on it? that is me who did those. But i dont think that You have a bad idea... maybe I need to draw a sketch and see...

[lostforawhile]

I was thinkin to deal with thet problem a bit diferently. I thoat if i'm fiberglas two coats under each fender(wheelarche). and under the trunk. Thet way I newer and i mean Newer gona get rust under there.... I'll maybe add couple of poundt of weight to the car. but thet i can live with.you have a tremendous amount of talent,99 percent of the population cannot do what you just did. If I was your teacher I wouldn't be complaining because the job of a teacher is to encourage talent. here in the united states the teachers have the problems of students not applying themselves to their work,or even wanting to learn. so when a student comes along with a lot of talent,and enthusiasm, they try to encourage them. it's sadly becoming a rare theing here for a student to say,hey I want to learn!! especially in the public schools. as far as your rust control go to www.eastwood.com, they make a three step rust control system that I personally know a lot of hot rodders who swear by it. the first step converts the rust,the second step seals it permamently,and the third step primes the surface. this stuff will stop your rust for good. also make sure when you get all done,you hose off the bottom of that car everyday,all the cracks and creviscis,get all that salt out. I know that one from personal experience being from the north. I see people who drive around with globs of salt and slush hanging off their car,then they wonder why it rusts.

[Tomisimo]

you have a tremendous amount of talent,99 percent of the population cannot do what you just did. If I was your teacher I wouldn't be complaining because the job of a teacher is to encourage talent. here in the united states the teachers have the problems of students not applying themselves to their work,or even wanting to learn. so when a student comes along with a lot of talent,and enthusiasm, they try to encourage them. it's sadly becoming a rare thing here for a student to say,hey I want to learn!! especially in the public schools. as far as your rust control go to www.eastwood.com, they make a three step rust control system that I personally know a lot of hot rodder who swear by it. the first step converts the rust,the second step seals it permanently,and the third step primes the surface. this stuff will stop your rust for good. also make sure when you get all done,you hose off the bottom of that car everyday,all the cracks ,get all that salt out. I know that one from personal experience being from the north. I see people who drive around with globs of salt and slush hanging off their car,then they wonder why it rusts.

Thank You for the tip. I was looking for something like that here but there wosint any. just unheard stuff.
This stuff is not expensive at all...
Maybe You are right about mi enthusiasm.. That is a bit of a problem for me, because teachers said to me that i do what i wont and dont listen to them. A part of me do but I'm not that bad that i dont take responsibility for what i do... Not every one cam understand me, my passion about doing things with cars. So i think that this gonna be written in mi resume, one day. :( I dream about a job where i can get freedom do do custom cars. But here in Norway there's no Car Culture at all... Lows are so straight so you can not bend them. Like a old saing says. - You need to piss straight... Mi only option then is to make mi oun livin by starting mi oun custom shop... Thet is a nice thoat, but in this burocratick seciety its not thet easy.... Well well. Thenk You for understanding me. Realy appretiate it...

[87lxiaccord]

I was thinkin to paint her, but theres much more body work must to be done. And a bodykit before she goes to paint booth...
I forgat to mantion thet i also have done the Short Shift. It was simple. I cut it in 3 peaces, cut out cople of mm. and then weldet back together with TIG. now i have 30-40% shorter shift travel. )))
Also i've ben at the J/Y resontly where i fund a boot from 5th gen Accord. Thet will be changet soon... I also spoted nice Prelude seats. Was wandering if anyone have tried them to instal in ours 3Gee? From 4th gen Lude. To bad, it had non VTec. Just F20a R-Cat SOCH in it.
Nice work! I tried to put 4g lude seats in my accord...It's possible but you would have to make new rails because the lude seats are wider than the accord seats. I ended up selling them and buying 3g lude seats :)

[Tomisimo]

Nice work! I tried to put 4g lude seats in my accord...It's possible but you would have to make new rails because the lude seats are wider than the accord seats. I ended up selling them and buying 3g lude seats :)

Ok. So 3G lude bolts on? I find out thet ur seats can be separated from the rails, you just unscrew the pillows from mechanism. I wanted if its possible to change just those, that way you'll get sports seats with original rails.
just a toad.

[speedpenguin]

hey, if you really want to pursure what you're doing as a career, move over here and flex your skills.

I think if you really want to make it happen you can pull it off. Even if you don't, it'll be an adventure.

[Tomisimo]

hey, if you really want to pursure what you're doing as a career, move over here and flex your skills.

I think if you really want to make it happen you can pull it off. Even if you don't, it'll be an adventure.

I have conceder that idea. For this to happen I need to earn some money first, so I have something to live from until I get a job.
This idea really frustrate me...

[MessyHonda]

Ok. So 3G lude bolts on? I find out thet ur seats can be separeted from the rails, you just unscrue the pillous from mechanisme. I wandet if its passible to chenge just those, thet way you'll get bocket seats with origimal rails.
just a thoat.


yup 3rd gen lude seats will work

[flyingmen4]

good job !

[AccordB20A]

I missed this thrtead totally, DAMN GOOD WORK, and i can also say an update is coming :)