PDA

View Full Version : another cancer thread :(



twofast4u
03-26-2007, 04:25 PM
Hey guys,

I saw the other thread about rust in rear quarter panels..but I just want to know which would be better, to fiberglass it or to actually cut it out the cancer and ribbit/weld on the same panel from a doner car...here are some pics of my 3geez cancer, its only in those spots..everywhere else is CLEAN!! Thanks for your help!!!:)

http://i10.photobucket.com/albums/a128/twofast4u/DSC00728-1.jpg
http://i10.photobucket.com/albums/a128/twofast4u/DSC00727.jpg
http://i10.photobucket.com/albums/a128/twofast4u/DSC00726.jpg
http://i10.photobucket.com/albums/a128/twofast4u/DSC00725.jpg
http://i10.photobucket.com/albums/a128/twofast4u/DSC00723.jpg

Sorry for the quality..its with my phone..

russiankid
03-26-2007, 04:27 PM
You can probably fiberglass it considering it is not that bad. Now if it was worse near the top of the wheel well yes you would have had to weld in panels.

Civic Accord Honda
03-26-2007, 05:16 PM
not that bad

jschatte
03-26-2007, 08:09 PM
thats about the same places my car is rusting. when it gets warmer im gonna fiberglass the lower front of the wheel well and spray some rocker guard along the bottom of the car. Im not really worried about my fenders tho :)

Estimated Prophet
03-27-2007, 05:22 AM
not that bad

speedpenguin
03-27-2007, 08:19 AM
Cut it out anyway. If you just do fiberglass, it's going to come back.

twofast4u
03-27-2007, 02:42 PM
i'll most probably fiberglass it, i only want to keep the car till im 24 or so (im 20 now) but i want it to look its best for those 4 years...