which e-brake cable does the SE-i use?

[ZackieDarko]

I'm on rock auto and I selected 89 SE-i and im looking at several e-brake cables here. Which one do I order?

# BC94026
# BC94027
# C94033
# C94012


The 1st two part #'s are for a "coupe" left and right side.

The 2nd set of #'s is for 4 and 3 door. This confuses me because the SE-i was only in Coupe and Sedan trims. Are the e-brake cables specific to the SE-i or will ones from a legend or some other honda/acrua work?

[BITESIZE]

What type of car did you get the sei brakes off of? lol. Just kidding! Good question!

[ZackieDarko]

Also do the coupe SE-i and the Sedan SE-i use different cables? Do the 88 and 89's differ in their cable usage?

[Blkblurr]

No such thing as an 88 SE-i

[Blkblurr]

I'm not sure but here is the page from Majestic Honda
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=Accord&catcgry2=1989&catcgry3=4DR+SEI&catcgry4=KA4AT&catcgry5=PARKING+BRAKE
this one is for the Sedan but I got the same numbers for the SE-i coupe here.

[MessyHonda]

my brakes came off justin turbo hatch...and the cables work fine one mine

[ZackieDarko]

I'm not sure but here is the page from Majestic Honda
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=Accord&catcgry2=1989&catcgry3=4DR+SEI&catcgry4=KA4AT&catcgry5=PARKING+BRAKE
this one is for the Sedan but I got the same numbers for the SE-i coupe here.



it doesn't list parts #9 and #13, which are the e-brake cables :(

[ZackieDarko]

my brakes came off justin turbo hatch...and the cables work fine one mine


were they the stock hatch cables? what year was his hatch?


i thought that the SE-i had different cables then the rest of the 3g's

[russiankid]

were they the stock hatch cables? what year was his hatch?
i thought that the SE-i had different cables then the rest of the 3g's
The SE-i did have different cables. If i am correct, Justin did the SE-i swap on his sedan.

[ZackieDarko]

there are several people who ahve done the SE-i swap

i have the parts for the SE-i swap...i wana do my SE-i swap...but i dont have the e-brake cables to do it :(

i am willing to pay a good chunk of change for these cables if somebody has a set laying around

[MessyHonda]

were they the stock hatch cables? what year was his hatch?
i thought that the SE-i had different cables then the rest of the 3g's


se-i's never came in hatch.....so i bet his rear disks where from a sedan...cuz the cable fit fine on my car. his hatch was 88 i believe.

[ZackieDarko]

anybody know if the SE-i coupe and SE-i sedan used the same cables? i would assume so

[guaynabo89]

dealer still sells em. think theyyre like 80 bucks a side.

just get sei cables. it dosnt mtter if its from a coupe or sedan.

all accords have the same wheelbase regardless of model.

and yeas the sei cables are different at the end where they connect to tha caliper. It is two pronged fork shaped at the end compared to the solid square end used in drums.

remember not only do you need the cables but also a pin that goes through the forked end that holds the cablke to the caliper arm. youll also need a slip pin to hold the othe pin in place.

[ZackieDarko]

dealer still sells em. think theyyre like 80 bucks a side.
just get sei cables. it dosnt mtter if its from a coupe or sedan.
all accords have the same wheelbase regardless of model.
and yeas the sei cables are different at the end where they connect to tha caliper. It is two pronged fork shaped at the end compared to the solid square end used in drums.
remember not only do you need the cables but also a pin that goes through the forked end that holds the cablke to the caliper arm. youll also need a slip pin to hold the othe pin in place.


FINALLY somebody with info i can use THANKYOU :)

do you know if the 1st or 2nd gen Legend cables will work?

[Blkblurr]

it doesn't list parts #9 and #13, which are the e-brake cables :(
look at #10 and #14

[ZackieDarko]

anybody know if these are the right cables?

these are what rockauto shows for these 2 part #'s

# BC94026
# BC94027

# BC94026
http://i9.photobucket.com/albums/a96/ZackieDarko/cable1.jpg

#BC94027
http://i9.photobucket.com/albums/a96/ZackieDarko/cable2.jpg

[ZackieDarko]

how about a VIGOR? think those e-brake cables would work?

how about the JDM 3g's/Vigors with all wheel disc brakes?