PDA

View Full Version : Quick speaker question



HondaHalla
05-02-2007, 05:30 PM
How do I take out the cover on the rear speakers. I want to change them this evening.
Do I do this from the trunk or from inside the car?

thanks.

ghettogeddy
05-02-2007, 05:34 PM
from the trunk there shouyld be 4 8mm bolts i belive i could be wrong on the size then when u get the pods ou there is 3 or 4 philips screws

MessyHonda
05-02-2007, 06:21 PM
they are 4 10mm nuts...you can get them with a ratchet...then disconect the wires and push up the speaker...you might have to take a dremel to the covers since they are kinda small for most aftermarket rear speakers

HondaHalla
05-02-2007, 07:29 PM
thanks guys. Done!.

How do I remove the door speakers? I guess I have to remove the entire door panel?

ghettogeddy
05-02-2007, 07:34 PM
no there should only be 3 screws around the bottom

HondaHalla
05-02-2007, 07:48 PM
I'll check that tomorrow.
thanks again.

teck
05-02-2007, 09:20 PM
the thing that sucks on those door speakers is i havent be able to find an aftermarket speaker that fits and mounts up like a stock one

Civic Accord Honda
05-02-2007, 10:49 PM
my pionerres lined up fine :D

ghettogeddy
05-03-2007, 04:38 AM
the thing that sucks on those door speakers is i havent be able to find an aftermarket speaker that fits and mounts up like a stock one
its cool id rather cut and mod the mounting bracket for better quality speakers

lx-i coupe
05-03-2007, 04:55 AM
i used to have a set of pioneer 5.25s in the factory brackets and then i bought a set of 5.25 to 6.5 adapters that were more of 5.25 spacers, so i had to cut the inner part out to fit my 6.5s

russiankid
05-03-2007, 06:13 PM
If you dont want to mod the covers, get some covers from an SE-i. They are 6x9's.

MessyHonda
05-03-2007, 06:27 PM
If you dont want to mod the covers, get some covers from an SE-i. They are 6x9's.


the 88-89 lx-i also came with rear 6by9.