PDA

View Full Version : stripped studs


coope
05-28-2007, 06:27 PM
I was riding and heard a poping noise from the front wheel find out my lug nuts was lose i don't kno how but one of them are stripped and one i broke so only 2 lugs are holding the wheel on i have tuner lugs on 17's what am i'm soposed to do about the stripped one.:rant: :rant:
LX-incredible
05-28-2007, 08:09 PM
Are the nuts stripped and broken, or is it the studs? If it is the studs you will need to press the hub off to get at them.
2drSE-i
05-28-2007, 08:44 PM
the studs from what it sounds like. Ya you need to get two new studs, at least. if your looking for an upgrade, ARP makes great studs.
coope
05-29-2007, 07:19 AM
is it easy to replace and how much would they run is it easy enough i can do it myself.
2drSE-i
05-29-2007, 07:32 AM
not too terribly hard...if you have access to a shop press. they run around 3 bucks a piece from honda.
Legend_master
05-29-2007, 08:51 AM
not too terribly hard...if you have access to a shop press. they run around 3 bucks a piece from honda.


Actually you can hammer the old one out, and use an open ended lug to drive the new one into place. You dont even need a press :thumbup:
MessyHonda
05-29-2007, 10:43 AM
Actually you can hammer the old one out, and use an open ended lug to drive the new one into place. You dont even need a press :thumbup:



is that how you did the ARP studs?
Legend_master
05-29-2007, 11:48 AM
is that how you did the ARP studs?

Yep, thats what I did :thumbup: .
coope
05-29-2007, 02:34 PM
thanx will get rite on it