PDA

View Full Version : 4gen parts given


coope
06-01-2007, 10:19 PM
ok someone said i come get the part off this 4gen accord be4 it goes to the jy so what all can i get off besides map sensor? need info in a hurry not trying to rush or enything.
ghettogeddy
06-01-2007, 10:23 PM
map sensor, rims, seats if there better then yours
Civic Accord Honda
06-01-2007, 10:29 PM
X2 and stering wheel
A18A
06-01-2007, 10:59 PM
4th gen wheels dont fit 3geez unless they are multi fit or either car has fucked up hubs, i think
MessyHonda
06-01-2007, 11:10 PM
performance parts...

trottle body, injectors, dizzy with wires for OBD1 swap. computer if you can. map sensor, and take the fuses out...for spares


rims dont fit our car....plus they UGLY.
Vanilla Sky
06-02-2007, 12:48 AM
Spoiler if so equipped, speakers if aftermarket, maybe the shift knob if you like it. Grab the wheels if they're aluminum. Scrap cast aluminum is over $1.50 a pound. If you cut off the old tires and scrap the wheels, you're looking at a good $50-$75 bucks.
frantik
06-02-2007, 01:45 AM
^ :orly: are the stock lxi wheels aluminum?
MessyHonda
06-02-2007, 08:11 AM
^ :orly: are the stock lxi wheels aluminum?



im not sure but i think they are alloy....
coope
06-02-2007, 02:55 PM
thanx i will take that into consideration i thought the seats didn't fit and obd1 what all i need to take for the conversion
Vanilla Sky
06-02-2007, 07:13 PM
yes, for sedans, at least.
snoopyloopy
06-02-2007, 07:33 PM
what year is this accord? 92+ is obd-1 and you'll need dizzy, ecu, a whole bunch of sensors, and lots of patience. and there's other stuff that i'm forgetting atm. i think igniter and other similar components.
russiankid
06-02-2007, 08:08 PM
4th gen wheels dont fit 3geez unless they are multi fit or either car has fucked up hubs, i think
Yea the 4gen is a 4x114mm bolt pattern if i am correct.
guaynabo89
06-02-2007, 11:01 PM
what year is this accord? 92+ is obd-1

all 4th gens are obd1

so if he decides to take the plunge he'll need the ecu, dist, o2 sensor, wiring harness for the dist/ecu /o2, and pull all the sensors. the accord ecu wont be that great though.
MessyHonda
06-02-2007, 11:06 PM
all 4th gens are obd1
so if he decides to take the plunge he'll need the ecu, dist, o2 sensor, wiring harness for the dist/ecu /o2, and pull all the sensors. the accord ecu wont be that great though.



yeah but the 92-93 have the external coil...so that means you can run an MSD coil. the early ones had the enternal ones that would heat up and cause them to last like 30k.
snoopyloopy
06-03-2007, 03:55 PM
all 4th gens are obd1
so if he decides to take the plunge he'll need the ecu, dist, o2 sensor, wiring harness for the dist/ecu /o2, and pull all the sensors. the accord ecu wont be that great though.
oh, i was under the impression that no hondas were obd-1 until 1992-1995 then afterwards obd-ii and it's variants.
coope
06-03-2007, 07:09 PM
well sounds like to much trouble i went 2day and got map sensor, speaker they were pionerr premiers so i got them and the radio which wires go to which on the map sensor.
Sporno
06-03-2007, 07:39 PM
sway bars!
nskforlife
06-03-2007, 07:46 PM
oh, i was under the impression that no hondas were obd-1 until 1992-1995 then afterwards obd-ii and it's variants.

some kid prolly told you this since the obd 1 civics were from 92-95,
in 96- some government action made every car company convert their cars to obd-2. and i think all cars made previous to 96 that are efi are obd-1 with honda/acura.