PDA

View Full Version : B20a 5 speed tranny thread



bullard123
06-05-2007, 01:22 PM
As you guys know I've been trying to find a 5 speed tranny for my B20a. Well I'm still looking for one. It seems like Lebon86lxi is giving me the run around. It's been over a month now since I have contacted him with money in hand and he still hasn't got a shipper yet. Im just asking everyone to keep their eyes open for one even you New Zealand members who can get a bellhousing shipped here to the U.S. Carotman hopefully you can run into one on your end also. I've been really patient with this project but I really need for someone to come through.

Steve_Si
06-08-2007, 02:36 AM
I haven't forgotten you, I always check for B18A powered 3gs on trademe to try and get another cheap tranny. Just nothing much comes up, they are a rare car :(

bullard123
06-08-2007, 04:50 AM
Thanks Steve. Its funny I registered on Trade Me myself last night to see if any were listed too. I had to put a fake address and phone# to register. And I said that I was from Christchurch too lol.

RobT5580
06-09-2007, 05:59 PM
If your real desperate pick up an automatic for the time being and run that until you can get a tranny or a bell housing. I worked on my spare tranny and i would like to get an A20 tranny to swap gears and to verify they all fit but i dont have the extra cash to play around with. Like i said i would sell my spare but i want good money for it and i got ripped off myself from SPI Tuning when i bought it myself.

rjudgey
06-10-2007, 01:02 AM
I think you guys' should try U.K. more, seem to be quite a few cropping up, at one stage i had B20A and box's coming out my ears!!

bullard123
06-10-2007, 05:55 AM
I think you guys' should try U.K. more, seem to be quite a few cropping up, at one stage i had B20A and box's coming out my ears!!
Really?? How 's it been going Rjudgey? Seems like you have been out of the loop for a while. I think we need to do a B20a 5 speed tranny group buy cause we don't have any over here

RobT5580
06-10-2007, 05:15 PM
You can get things its just a matter of how much money you have. I did a large OEM JDM parts order from japan a few years ago and i got a lot of stuff air frieght in a week or so to my door but i paid like $400 or something stupid in shipping.

I might be able to source some trannies out of japan but i dont think they would be cheap unless i get in good with this guy. My uncle knows a guy that imports containers of crashed EVO's and such for ralley cars and iv been trying to meet up with him but have not yet. I might try to get in contact with him because he goes to japan himself to pick out cars to ship back state side.

MessyHonda
06-10-2007, 08:37 PM
yeah....cant u use the bell housing that steve has...just pay the shipping and use the accord gears.

bullard123
06-10-2007, 08:41 PM
yeah....cant u use the bell housing that steve has...just pay the shipping and use the accord gears.
Steve broke that bellhousing trying to take it apart remember. I got something in the works right now though

MessyHonda
06-10-2007, 08:43 PM
Streve broke that bellhousing trying to take it apart remember. I got something in the works right now though



i would still get it....he only chiped couple pieces off....fucking JB weld that shit..what ever works. have it as a back up....plus money talks.

bullard123
06-10-2007, 08:48 PM
i would still get it....he only chiped couple pieces off....fucking JB weld that shit..what ever works. have it as a back up....plus money talks.
I would but I don't think it will be worth it. Shipping alone will kill the deal plus I don't think Jb weld will do the job for that piece. It will be better to get a whole new bellhousing

MessyHonda
06-10-2007, 08:54 PM
I would but I don't think it will be worth it. Shipping alone will kill the deal plus I don't think Jb weld will do the job for that piece. It will be better to get a whole new bellhousing


yeah i would get it welded or something...but you cars has been out of service for about a year now....it bugs me....i went nuts when i could not drive my lx-i for about 2 weeks.

rjudgey
06-11-2007, 12:17 AM
Ever tried asking honda howmuch a new gearbox would be if they have any left? probably wouldn't be too bad and it would be new? Anyways still think it's worth looking around the U.K. but anyways B20A project is scrapped for me have sold all the parts to another fellow B20A lude owner but don't worry will still be building a couple of B20A's for some silly power. I have found myself a really really mint 2nd Gen carbed lude with 30k miles and will be tinkering around with that from now on so will be concentrating on A20 engines only for the time being!! But still can have stainless steel Weber or ITB inlet manifolds made for you guy's if you need em!!

check out this for my new car!!

http://www.cardomain.com/ride/281725/15

bullard123
06-11-2007, 04:43 AM
yeah i would get it welded or something...but you cars has been out of service for about a year now....it bugs me....i went nuts when i could not drive my lx-i for about 2 weeks.
Yeah I hear ya. I can't wait to get it up and runnin again!

bullard123
06-11-2007, 04:45 AM
Ever tried asking honda howmuch a new gearbox would be if they have any left? probably wouldn't be too bad and it would be new? Anyways still think it's worth looking around the U.K. but anyways B20A project is scrapped for me have sold all the parts to another fellow B20A lude owner but don't worry will still be building a couple of B20A's for some silly power. I have found myself a really really mint 2nd Gen carbed lude with 30k miles and will be tinkering around with that from now on so will be concentrating on A20 engines only for the time being!! But still can have stainless steel Weber or ITB inlet manifolds made for you guy's if you need em!!
check out this for my new car!!
http://www.cardomain.com/ride/281725/15
Rjudgey that thing is clean! Are you planning on B20ing it?

rjudgey
06-11-2007, 09:06 AM
Not at the minute trying to see if i can get some Mugen CF-48's for it then other than custom header and exhaust in stainless going to leave it alone really, maybe drop a mild cam into it and some headwork if the head gasket blows, get it upto JDM spec which is 125bhp but should be higher with a good exhaust and header upto maybe 135-140 with the sidedraughts, then maybe if they start playing up switch to the webers. Want to keep it looking real stock and sleeper then go to town with the suspension and brakes.

But yeah it's really sweet so looks like i won't be joining the 3Geez club not for a while anyways!! Unless one comes along thats a really good deal. and no wont be putting in a B20A they don't drop into 2G preludes as easily as 3G accord, the B20A 2G lude is more like 2.5G it's structuraly a lot different to the carbed and USDM 2.0 SI. I'll still be doing development work on the B20A and if anyone wants to pay for materials and machining work and the postage and doesn't mind waiting quite a few months i'd be more than happy to do heads for you guy's still B20A or A20A.

TWOLOUDNPROUD
06-11-2007, 03:53 PM
Look what i got today.bullard123 lets make a deal
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6275.jpg
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6274.jpg

bullard123
06-11-2007, 04:46 PM
Look what i got today.bullard123 lets make a deal
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6275.jpg
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6274.jpg
Oh Snap! Pm me!

TWOLOUDNPROUD
06-11-2007, 04:53 PM
pm sent

bullard123
06-11-2007, 06:02 PM
Payment sent!

reanimator420
06-11-2007, 06:09 PM
im happy for you bullard, that was a long wait well worth it!! congrats!

bullard123
06-11-2007, 07:14 PM
Thanks everyone!

rjudgey
06-12-2007, 12:50 AM
Well done do you have everything you need now? or do i need to keep my open still for things like mounts or any shafts you might need? any ways result hope you didn't get too stung by this be worth it in the long run!! All you need now is your B16 LSD and some new syncros and you'll be ready to rock n roll!!

bullard123
06-12-2007, 04:53 AM
Well done do you have everything you need now? or do i need to keep my open still for things like mounts or any shafts you might need? any ways result hope you didn't get too stung by this be worth it in the long run!! All you need now is your B16 LSD and some new syncros and you'll be ready to rock n roll!!
Yeah I feel like women who have to wait for 9 months before they give birth to a child lol. They get all happy and excited when the child finally gets here. I still need a rear tranny mount but I think the shop that I'm working with can come up with something and a full gasket set.

jlros75
06-12-2007, 06:23 AM
Nice, hopefully I could see it running. Hope everything goes smooth in your proyect from now on.

snoopyloopy
06-12-2007, 08:32 AM
Look what i got today.bullard123 lets make a deal
where the heck do you keep busting out all these b20a parts from?

TWOLOUDNPROUD
06-12-2007, 09:26 AM
where the heck do you keep busting out all these b20a parts from?
Luck and thank God for free long distance

Cheeseburger
06-12-2007, 09:40 AM
wow!

A18A
06-13-2007, 01:12 AM
B2k5 Ftw!!!

RobT5580
06-13-2007, 05:02 PM
At one point i had 4 B20A's 3 with 5speeds :) now i have one stock one in my accord and two torn down awaiting rebuilds for turbos and one tranny in need of a hybrid gear set for my turbo build. I hope to get a connection in japan so i can get some stuff plus i need more oem parts and these days we have a lot of options rather than when i was guessing on what to use.

thegreatdane
06-15-2007, 03:09 AM
Rob, hybrid gear set? Did you find gears that fit from some other tranny?

RobT5580
06-15-2007, 03:16 PM
I have not played with it yet but i want to look for an ideal ratio for turbo cause i have no clue when it comes to ratios or whats better. I know the B20A gears are to short for boost and i want to stretch them out at least with A20 gears providing that all works out. I have my eyes out for a cheap A20 tranny.

MessyHonda
06-15-2007, 03:40 PM
I have not played with it yet but i want to look for an ideal ratio for turbo cause i have no clue when it comes to ratios or whats better. I know the B20A gears are to short for boost and i want to stretch them out at least with A20 gears providing that all works out. I have my eyes out for a cheap A20 tranny.


yeah the carb tranny has a lil bit longer gears.

TWOLOUDNPROUD
06-15-2007, 03:42 PM
bullard123 It on it way
http://i109.photobucket.com/albums/n80/TwoLoudNproud/untitled.jpg

TWOLOUDNPROUD
06-15-2007, 04:56 PM
bump

bullard123
06-15-2007, 11:10 PM
bullard123 It on it way
http://i109.photobucket.com/albums/n80/TwoLoudNproud/untitled.jpg
Thanks Tommy. You're my hero! :)

TWOLOUDNPROUD
06-19-2007, 04:05 PM
WARNING
That baby weights 123pounds

snoopyloopy
06-19-2007, 06:07 PM
WARNING
That baby weights 123pounds
holy hell. is it that much bigger than the a20 tranny? or am i just stronger than i realize?

bullard123
06-19-2007, 08:36 PM
WARNING
That baby weights 123pounds
He He 123 [pounds for bullard123. That tranny had my name written all over it

TWOLOUDNPROUD
06-20-2007, 08:40 AM
Colorado Springs,
Co, Us 06/20/2007 7:20 A.m. Out For Delivery

TWOLOUDNPROUD
06-20-2007, 09:51 AM
http://i102.photobucket.com/albums/m89/CorpseGrinder88/GPKBONUS13copy.jpg

TWOLOUDNPROUD
06-20-2007, 09:52 AM
http://img431.imageshack.us/img431/9427/gpkmaniac4rg8yv.gif

bullard123
06-20-2007, 05:06 PM
Got it today! Thanks a mill twoloundandproud. Tranny was crated and looked well packaged

TWOLOUDNPROUD
06-20-2007, 05:35 PM
get that baby in

A18A
06-20-2007, 06:17 PM
yay now you can FINALLY get your car going :D its been a long wait

MessyHonda
06-21-2007, 11:48 AM
yeah a20 manual trannys are like 60-70 pounds.

TWOLOUDNPROUD
06-21-2007, 01:41 PM
yeah a20 manual trannys are like 60-70 pounds.
The crat was like 35pounds