pictures out of the "possum works"

[lostforawhile]

some new projects,deceided to make a cold air box for the SU carbs,since i have the hood scoop might as well use it. this will be made from a z car air box,with a lot of extensive metal work. it will mount over the manifold,valve cover,then duct air back to the carbs. need to drill out the spot welds from the brackets on the air box,and fill the holes with weld,then i willl make new brackets closer to having everything on the car. i will probably hang the old air cleaners on my wall or something lol.
http://i20.photobucket.com/albums/b205/moultriemanicmechanic/57690-R1-06-19_007.jpg

http://i20.photobucket.com/albums/b205/moultriemanicmechanic/57690-R1-07-18_008.jpg
http://i20.photobucket.com/albums/b205/moultriemanicmechanic/57690-R1-03-22_004.jpg
http://i20.photobucket.com/albums/b205/moultriemanicmechanic/S4020002-3.jpg
other project the fuel pick up for the new pump,i have to drill a hole in the top plate for the fuel pump hanger bracket,then the feed through mounts in there,and the pickup tube gets mounted along side the factory pckup. with a couple of check valves,the factory pump can be used as a backup pump. the walbro pump goes under the car in the optional factory underbody pump location,in front f the left rear tire. when i get the check valves,i will build a fuel distribution block,so both pumps feed into it. i think i'm going to go with a single underhood mount fuel filter like the one from summit racing. http://img101.mytextgraphics.com/photolava/2007/07/20/s4020005-477rajpke.jpg
here is the site for the walbro pumps
http://www.autoperformanceengineering.com/html/fr_pumps.html

[Cheeseburger]

wicked!

[lostforawhile]

i think i will post most of my project pictures in this thread lol,i can't use skunk works,so i have to use possum works since i'm in the south

[2oodoor]

nice work

ehh hehh, some people call um possums I call um pole cats ehh heh, ehh heh
scat pole cat, ehh heh... pass the mustard ehh heh I reckon Ill have some of dem biscuits too ehh heh...

slingblade:)

[Civic Accord Honda]

nice work

ehh hehh, some people call um possums I call um pole cats ehh heh, ehh heh
scat pole cat, ehh heh... pass the mustard ehh heh I reckon Ill have some of dem biscuits too ehh heh...

slingblade:)
O_- :wtf::huh:

[A18A]

damn lost, your car is very unique

[ahmad89]

you suck tim i can do a better job:banned:

[lostforawhile]

couple more,the oil cooler, i deceided to change the mounting location,i'm thinking of welding some mounting brackets to an extra front cross member. i'm trying to figure out if thats a low pressure area near the bottom of the car, if it is i just need to duct air from a high pressure area for it to flow through the cooler.
http://img104.mytextgraphics.com/photolava/2007/07/23/s4020011-478m8ur4h.jpg
the pedals,i'm going to make myself find time to install these dam things,i made them years ago. about time to put them in.
http://img101.mytextgraphics.com/photolava/2007/07/23/s4020012-478m8ur9o.jpg

[ahmad89]

Cool keep up the good work lost.

[Civic Accord Honda]

SEXY
http://img101.mytextgraphics.com/photolava/2007/07/23/s4020012-478m8ur9o.jpg