antenna question

[che3wy]

ok dont call me noob cuz i did search

but my idea is to remove that ugly antenna thats above the driver side door and then install one of those little blocks that the BMW or the Acura TL have. im just looking for an antenna thats like a little black box fairly easy to install. if anyone knows let me know and wat i need

[ghettogeddy]

are u talking like the ones on the back of the rrof or the ones insode the car

[che3wy]

ones on the roof. or if it can be mounted inside that'd be even better

[Catalyst]

whatever you do make sure you keep the parts from your old antenna, you will need them to cover the existing hole if you decide to mount the new one someplace else.

[ghettogeddy]

id say just search for a hidden antenna

[che3wy]

yeah i was planning on bondo the hole or figure somthing out

[BITESIZE]

You will have to weld the antenna hole shut first like I did. :)

[MessyHonda]

ok when i do my car body work il shut the antenna hole also...kinda sucks cuz my antenna motor still works...half of out cars dont work after 10 years. i still remember that one 3gee listing that said it had a Martini switch...haha

[thegreatdane]

still remember that one 3gee listing that said it had a Martini switch...haha

lol, never thought of that hahaha.

[DDRaptor]

ebay has alot of hidden antenna even amplified ones i would lower the stock one and just disconnect it from your head unit.

[che3wy]

ebay has alot of hidden antenna even amplified ones i would lower the stock one and just disconnect it from your head unit.

yeah i was gonna do that until i got it fixed

anyone know a good brand for stuff like this? this is wat i found on ebay
http://cgi.ebay.com/ebaymotors/Autoloc-Hidden-FM-Antenna-Easy-to-Install_W0QQcmdZViewItemQQcategoryZ33639QQihZ005QQ itemZ150148266662QQrdZ1QQsspagenameZWDVW

[ghettogeddy]

autriloc is a good brand
little price but will do the trick im sure but just look a little harder im sure thats just a re badged japan model lol

[hanginbyaccord]

too bad japan dont have a antenna block off plate for our cars like they do for the eg civics

[MessyHonda]

too bad japan dont have a antenna block off plate for our cars like they do for the eg civics



thats why you have to love our cars....everything has to be custom made.

[AccordB20A]

stock 2.0si with electronic antenna ftw!

[A18A]

glass ones for the win

[evil88accordLX]

i still remember that one 3gee listing that said it had a Martini switch...haha
snap! i wish it WAS a martini switch!

its not hard to fill the hole either. i just did that to my crx. i took some tin snips and cut a piece to fit the hole. if you dont have a welder, JB weld will work just fine, but you will need a magnet to hold the patch plate in place while the JB weld hardens. once its hard, sand that puppy down, and use a glazing putty to get the surface imperfections perfect, wait to dry, sand and paint. its pretty simple, just dont weld your magnet to the car!