experts pls helpppppppppppppppp

[getalife]

Guys the F20A is really shity and will never fit in G3, however I found this
B16A modified with headers , came modified originaly from Japan , it looks sexy and like monster!! the only thing is the grear box of the engine is broken ,

the question is : does the old gear box of my G3 integra Carb fit on the B16A ?????? and what else the mounts need to be be custom?? i will be using the same old axles , is that ok too ?



pls reply as soon as possible

thxxxx

[getalife]

guys again i found a full B16A engine, and all the stuff .. what customs I will need?

[snoopyloopy]

mounts and axles. that's about it. everything else will just be a bit of trial & error in getting stuff to fit.

[2drSE-i]

the gear box off a 3g will not go onto a b16...sorry. you will need a replacement

[getalife]

i really appreciate ur help guys :)
right now we dont need the gear box of the 3g , since i found a full engine kit,
how about the axles and mounts in b16a needs alot of customs, or it will be easy ? note: there will be a pro fabri guy and he's expert one,
isn't hard to do the mounts the axles?

[snoopyloopy]

if you have a pro fabrication guy working with you, then mounts are easy. and the axles, you just have to try different combinations of integra/civic/accord outers and inners until you get one that works.

[Legend_master]

Guys the F20A is really shity and will never fit in G3, however I found this
B16A modified with headers , came modified originaly from Japan , it looks sexy and like monster!! the only thing is the grear box of the engine is broken ,
the question is : does the old gear box of my G3 integra Carb fit on the B16A ?????? and what else the mounts need to be be custom?? i will be using the same old axles , is that ok too ?
pls reply as soon as possible
thxxxx

SO you want to put the b16 into an Integra or an Accord?

[getalife]

my car is accord EXR 1896, it had B18A carb, so what do u think Legend master???

[snoopyloopy]

my car is accord EXR 1896, it had B18A carb, so what do u think Legend master???
1896, eh? japan was way ahead of the game on this weren't they. :lol:

[getalife]

loool snoppy , it's accord EXR 1986

[A18A]

:rofl:

[Legend_master]

my car is accord EXR 1896, it had B18A carb, so what do u think Legend master???


Well you will need custom mounts, custom axles, and a custom wiring harness. It is possible, but will take alot of $$$, or a lot welding on your part.

[getalife]

the mounts will cost around 80$ that is ok ( thx God i'm in syria) custom wiring harness is ok too, axles need alot of work legend master? and how about the Gear box??? is it gonna fit smoothly?

[snoopyloopy]

oh, btw, don't forget to send the b18a over here. i'm sure there's a few people who wouldn't mind getting their hands on it. and you'll also need to upgrade your fuel delivery system since you'll be running an efi engine instead of carb.

[getalife]

snoopy :P i'm over here in syria :||| in the middle east , shippment will cost huggggge , we counted the fuel delivery system :) thx for reminding ..

what do u think, the car will be running good comparing to the old b18a carb ???

[Legend_master]

the mounts will cost around 80$ that is ok ( thx God i'm in syria) custom wiring harness is ok too, axles need alot of work legend master? and how about the Gear box??? is it gonna fit smoothly?


What car is the gearbox from? If it is a 3rd gen integra you will need a hydrolic to cable convertion.

[snoopyloopy]

lol, crate it and take it to a freight company, see how much it would be.

[getalife]

Master, i got the b16a as full package, engine, axles, gear box, mounts, and all the electronic stuff for 900$$

how about that?

[Legend_master]

Master, i got the b16a as full package, engine, axles, gear box, mounts, and all the electronic stuff for 900$$
how about that?


It all depends on the year of the motor. I am not sure what model car your engine came from since you are in syria. You need to figure out if the gearbox is a Cable or Hydrolic? If you can take a picture of it I can tell you.

[getalife]

well Legend, i'm sure 100% the b16a came from japan , since this dealer only deal with the japan market, and btw it's b16a Vtec!! any clue???

[Legend_master]

well Legend, i'm sure 100% the b16a came from japan , since this dealer only deal with the japan market, and btw it's b16a Vtec!! any clue???

Sorry man, the b16a came in a lot of cars from 1988 to 2001. The earlier models had cable gearboxes, and the later models had hydraulic. The front of the gearbox must have a lever that looks like the one pictured below.

http://img.photobucket.com/albums/v667/Legend_Master/DSCF0054copy.jpg

[snoopyloopy]

is it obd-0, obd-1, obd-2...? bc all jdm b16a are coded "b16a," no matter what the year it's from.

[MessyHonda]

is your b18 accord carb engine come with a manual or automatic trans?

[getalife]

well my b18a a carb automatic

Legend I will save the pic :D thx sooooooo much
I believe it came from the 89-92 :0 hope it will fit , however i think it's better than the f20a :( too shity hard to fit

[Legend_master]

well my b18a a carb automatic
Legend I will save the pic :D thx sooooooo much
I believe it came from the 89-92 :0 hope it will fit , however i think it's better than the f20a :( too shity hard to fit


It will be easier to fit then the f20a, Good luck :thumbup: .

[getalife]

Legend master, I really appreciate ur help man!! you really helped me with the gear box thing and the posted pic :) actually today i went down to the center and I gave them the f20a back and choosed a b16a one which it looks clean one , and i could get it with axles , gear box , 2 computers, the shiftter for the gear box , since i'm auto , the milage and rbm clocks ( dunno what its named :s) the mounts, and it's abvious it looks so eaiser to fit, the gear box look like the old b18 carb i had,
i found something wrote on the b16a says 1201991 dunno if it means the year of production !! but it's soooo clean in addition the mechanic guy told me this engine has alot of adds :DD:D:D:D:D fuckin fabulous

again thanks for help buddy :)

Accord rocks !!

[Legend_master]

Legend master, I really appreciate ur help man!! you really helped me with the gear box thing and the posted pic :) actually today i went down to the center and I gave them the f20a back and choosed a b16a one which it looks clean one , and i could get it with axles , gear box , 2 computers, the shiftter for the gear box , since i'm auto , the milage and rbm clocks ( dunno what its named :s) the mounts, and it's abvious it looks so eaiser to fit, the gear box look like the old b18 carb i had,
i found something wrote on the b16a says 1201991 dunno if it means the year of production !! but it's soooo clean in addition the mechanic guy told me this engine has alot of adds :DD:D:D:D:D fuckin fabulous

again thanks for help buddy :)

Accord rocks !!


Glad I could help, good luck :thumbup: .

[MessyHonda]

sweet...hope you get your accord running soon

[shepherd79]

i hope you are planning on converting your fuel system from carb to EFi.
Also you probably will need 3G EFI cabin and engine harness.